Home Products TFT Display IPS TFT LCD WF50FTWAGLNN0

5" 800x480 Wide Temperature IPS TFT LCD

Model No. WF50FTWAGLNN0

►Size : 5 inch
►Resolution : 800x480 dots
►View Direction : IPS
►Interface : LVDS
►Driver IC:ST7262
►Control-Board : No
►Brightness(cd/m²) : 500
►Frame Through Hole : No
►Touch Screen : No
►Operating Temperature : -30~+80°C (Wide Temperature)

Description

WF50FTWAGLNN0 is a 5-inch IPS TFT LCD module in landscape orientation, with a resolution of 800x480 pixels. The module is equipped with the ST7262 driver IC and supports an LVDS interface (default VESA standard). It offers a contrast ratio of 1000:1 (typical value) and a brightness of 500 nits (typical value). If an RGB interface is required, please consider the WF50FTWAGDNN0 model.

This 5-inch IPS TFT display provides a wider viewing angle compared to TN TFT displays, with viewing angles of 80° left, 80° right, 80° up, and 80° down (typical values). The supply voltage for the WF50FTWAGLNN0 ranges from 3.1V to 3.6V, with a typical value of 3.3V. It has an aspect ratio of 5:3 and features a normally black, transmissive LCD type with anti-glare surface glass. The module operates within a wide temperature range from -30°C to +80°C and can be stored in temperatures between -30°C and +80°C.

Additionally, the WF50F series offers optional resistive touch panel and projected capacitive touch panel versions to meet different application needs.

DRAWING

5" 800×480 Wide Temperature IPS TFT LCD - WF50FTWAGLNN0

SPECIFICATIONS

General Specifications

Item Dimension Unit
Size 5.0 inch
Dot Matrix 800 × 3(RGB) × 480 dots
Module dimension 120.7(W) × 75.8(H) × 2.8 mm
Active area 108(W) × 64.8 (H) mm
Dot pitch 0.135(W) × 0.135(H) mm
LCD type TFT, Normally Black, Transmissive
View Direction 80/80/80/80
Aspect Ratio 5:3
Driver IC     ST7262 or equivalent
Interface LVDS
Backlight Type LED, Normally White
Touch Panel Without Touch Panel
Surface Anti-Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -30 +80
Storage Temperature TST -30 +80

Electrical Characteristics

Typical Operation Conditions

Item Symbol Values Unit
Min. Typ. Max.
Power voltage VCC 3.1 3.3 3.6 V
Power voltage VCCI 3.1 3.3 3.6 V
Current for Driver(Black) ICC - 67.6 102 mA

Interface

LCM PIN Definition

FPC Connector is used for the module electronics interface.

Pin Symbol Function
1 NC No connection
2 VCC Power voltage
3 VCCI Power supply for digital I/O pins.
4 NC No connection
5 GRB Global reset pin. When GRB is “L”, internal initialization procedure is executed
6 DISP Display on/off
7 GND Power Ground
8 RXIN0- LVDS input lane: RX0-/ RX0+ (RX0N/RX0P)
9 RXIN0+
10 GND Power Ground
11 RXIN1- LVDS input lane: RX1-/ RX1+(RX1N/RX1P)
12 RXIN1+
13 GND Power Ground
14 RXIN2- LVDS input lane: RX2-/ RX2+(RX2N/RX2P)
15 RXIN2+
16 GND Power Ground
17 RXCLKIN- LVDS input lane, detail pin define please refer to LVDS
Input Pin Mapping Table. (DCLKN/ DCLKP)
18 RXCLKIN+
19 GND Power Ground
20 RXIN3- LVDS input lane: RX3-/ RX3+(RX3N/RX3P)
21 RXIN3+
22 GND Power Ground
23-24 NC No connection
25 FMT FMT sets LVDS data format.
L : VESA Mode (Default)
H : JEIDA Mode
26-27 NC No connection
28 SELB SELB LVDS 3- / 4- lane.
L : 3-lane
H : 4-lane(Default)
29 NC No connection
30 GND Power Ground
31-32 VLED- Power for LED backlight (Cathode)
33 L/R Horizontal scan direction control pin.
L : From right to left.
H : From left to right.(Default) 
34 U/D Vertical scan direction control pin.
L : From down to up.
H : From up to down. (Default)
35 NC No connection
36-37 GND Power Ground
38 NC No connection
39-40 VLED+ Power for LED backlight (Anode)
go top
close

We value your privacy

By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.

We value your privacy

Winstar and certain third parties use cookies on www.winstar.com.tw. The details regarding the types of
cookies, their purpose and the third parties involved are described below and in our Cookie Policy.
Please click on “Allow All” to consent to our usage of cookies in order to have the best possible
experience on our websites. You can also set your preferences or reject cookies (except for strictly
necessary cookies).

Manage Consent Preferences

Always Active
Essential Cookies

These cookies are essential in order to enable you to move around the website and use its
features, such as setting your privacy preferences, logging in or filling in forms.

Analytics Cookies

Also known as “statistics cookies,” these cookies collect information about how you use a website, like which pages you visited and which links you clicked on. See Detail