WF50FSWAGDNN0 is a 5-inch IPS TFT LCD panel display with outdoor viewability, featuring IPS panel technology and a resolution of 800 x 480 pixels. The TFT-LCD module is built with an ST7262 driver IC and supports a 24-bit RGB interface. It boasts a high brightness of 1000 nits (typical) and a high contrast ratio of 1000:1 (typical). Additionally, it offers a wide operating temperature range from -30°C to +80°C, with a storage temperature range of -30°C to +80°C.
This 5" IPS TFT has a wider viewing angle than TN TFT, with a view angle of Left: 80 / Right: 80 / Up: 80 / Down: 80 degrees (typical value). The supply voltage of the WF50F model is from 3.1 to 3.6V, with an aspect ratio of 5:3. It is typically black, transmissive LCD type, with an anti-glare surface glass.
This IPS 5-inch high-brightness display is suitable for various outdoor applications, particularly those requiring clear visibility in bright environments. Possible applications include outdoor equipment (vending machines), industrial control panels, in-car displays (entertainment systems or dashboards), aerospace applications (drones), medical displays (patient monitoring devices), outdoor navigation devices (GPS and navigation systems), maritime applications (ship and submarine dashboards), amusement parks, and outdoor events.
For applications where high brightness is not necessary, customers may consider the WF50FTWAGDNN0, which has a module brightness of 500 nits (typical).
DRAWING
SPECIFICATIONS
General Specifications
Item
Dimension
Unit
Size
5
inch
Dot Matrix
800 × 3(RGB) × 480
dots
Module dimension
120.7(W) × 75.8(H) × 2.8(D)
mm
Active area
108(W) × 64.8 (H)
mm
Dot pitch
0.135(W) × 0.135(H)
mm
LCD type
TFT, Normally Black, Transmissive
View Direction
80/80/80/80
Aspect Ratio
5:3
TFT Driver IC
ST7262 or equivalent
TFT Interface
24 bit R.G.B.
Backlight Type
LED, Normally White
Touch Panel
Without Touch Panel
Surface
Anti-Glare
Absolute Maximum Ratings
Item
Symbol
Min
Typ
Max
Unit
Operating Temperature
TOP
-30
-
+80
℃
Storage Temperature
TST
-30
-
+80
℃
Electrical Characteristics
Item
Symbol
Values
Unit
Min.
Typ.
Max.
Power voltage
VDD
3.1
3.3
3.6
V
Current for Driver(Black)
IDD
-
65
97.5
mA
Input logic high voltage
VIH
0.7 VDD
-
VDD
V
Input logic low voltage
VIL
0
-
0.3 VDD
Interface
LCM PIN Definition
FPC Connector is used for the module electronics interface.
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.