Model No. WF50FTWAGDNGB
►Size : 5"
►Resolution : 800 x 480 dots
►View Direction : IPS
►Interface : RGB
►Driver IC : ST7262
►Control-Board : No
►Brightness(cd/m²): 400
►Frame Through Hole : No
►Touch Screen : Projected Capacitive Touch Screen (PCAP)
►Detect Point : 5 Fingers
The WF50FTWAGDNGB is a 5-inch TFT LCD module with a resolution of 800 × 480 pixels and an aspect ratio of 5:3. This TFT module is equipped with a projected capacitive touch screen and adopts IPS display technology, providing wider viewing angles of 80 degrees in all directions (left, right, up, and down). It features a built-in ST7262 driver IC and supports a 24-bit RGB interface.
The module's dimensions are 147 × 104 mm, with an active area size of 108 × 64.8 mm. It includes a projected capacitive touch panel (PCAP) with a GT911 driver IC, supporting I2C interfaces and 5-point touch functionality. The power supply voltage ranges from 3.1V to 3.6V, with a typical value of 3.3V.
This module is designed to operate within a wide temperature range: from -30℃ to +80℃ for both operating and storage conditions. It has a contrast ratio of 1,000:1 (typical value) and a brightness of 400 nits (typical value).
The 5-inch display module is suitable for use in control panels for white goods, industrial control systems, audio equipment, and home security systems.
| Item | Dimension | Unit |
|---|---|---|
| Size | 5.0 | inch |
| Dot Matrix | 800 × 3(RGB) × 480 | dots |
| Module dimension | 147.0(W) × 104.0(H) × 4.88 | mm |
| Active area | 108(W) × 64.8(H) | mm |
| Dot pitch | 0.135(W) × 0.135(H) | mm |
| LCD type | TFT, Normally Black, Transmissive | |
| View Direction | 80/80/80/80 | |
| Aspect Ratio | 5:3 | |
| Driver IC | ST7262 or equivalent | |
| TFT Interface | 24-bit RGB | |
| Backlight Type | LED, Normally White | |
| PCAP IC | GT911 or equivalent | |
| PCAP Interface | I2C | |
| PCAP FW Version | 65 | |
| PCAP Resolution | 800*480 | |
| Touch Screen | Projected Capacitive Touch Screen | |
| Surface | Glare | |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -30 | － | +80 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
| Item | Symbol | Values | Unit | ||
|---|---|---|---|---|---|
| Min | Typ | Max | |||
| Power voltage | VDD | 3.1 | 3.3 | 3.6 | V |
| Current for Driver (Black) | IDD | - | 65 | 97.5 | mA |
| Input logic high voltage | VIH | 0.7 VDD | - | VDD | V |
| Input logic low voltage | VIL | 0 | - | 0.3 VDD | |
| Supply PCAP | VDDT | 2.8 | - | 3.3 | V |
| ICTP | － | 15 | 22.5 | mA | |
FPC Connector is used for the module electronics interface.
| Pin | Symbol | Function |
|---|---|---|
| 1 | VLED- | Power for LED backlight (Cathode) |
| 2 | VLED+ | Power for LED backlight (Anode) |
| 3 | GND | Power Ground |
| 4 | VDD | Power voltage |
| 5 | R0 | Red data (LSB) |
| 6 | R1 | Red data |
| 7 | R2 | Red data |
| 8 | R3 | Red data |
| 9 | R4 | Red data |
| 10 | R5 | Red data |
| 11 | R6 | Red data |
| 12 | R7 | Red data(MSB) |
| 13 | G0 | Green data(LSB) |
| 14 | G1 | Green data |
| 15 | G2 | Green data |
| 16 | G3 | Green data |
| 17 | G4 | Green data |
| 18 | G5 | Green data |
| 19 | G6 | Green data |
| 20 | G7 | Green data(MSB) |
| 21 | B0 | Blue data(LSB) |
| 22 | B1 | Blue data |
| 23 | B2 | Blue data |
| 24 | B3 | Blue data |
| 25 | B4 | Blue data |
| 26 | B5 | Blue data |
| 27 | B6 | Blue data |
| 28 | B7 | Blue data(MSB) |
| 29 | GND | Power Ground |
| 30 | CLK | Sample clock(DCLK) |
| 31 | DISP | Display on/off |
| 32 | NC | No connection |
| 33 | NC | No connection |
| 34 | DE | Data input enable |
| 35 | NC | No connection |
| 36 | GND | Power Ground |
| 37 | NC | No connection |
| 38 | NC | No connection |
| 39 | NC | No connection |
| 40 | NC | No connection |
| Pin | Symbol | Function |
|---|---|---|
| 1 | VSS | Ground for analog circuit |
| 2 | VDDT | Power Supply : +3.0V |
| 3 | SCL | I2C clock input I2C clock input |
| 4 | NC | No connect |
| 5 | SDA | I2C data input and output |
| 6 | NC | No connect |
| 7 | /RST | External Reset, Low is active |
| 8 | NC | No connect |
| 9 | /INT | External interrupt to the host |
| 10 | VSS | Ground for analog circuit |
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.
