Home Products TFT Display High Brightness TFT Display WF101JSYAHMNB0

10.1-inch High Brightness IPS MIPI TFT Display with PCAP (1024x600)

Model No. WF101JSYAHMNB0

►Size : 10.1 inch
►Resolution : 1024×600 dots
►View Direction : IPS
►Interface : MIPI DSI
►Driver IC : EK79007AD3+EK73217BCGA
►Control-Board : No
►Brightness(cd/m2) : 900
►Frame Through Hole : No
►Touch Screen : Projected Capacitive Touch Panel (PCAP)
►Detect Point : 5 Fingers

Description

WF101JSYAHMNB0 is a 10.1-inch MIPI DSI interface High Brightness 1024 x 600 IPS TFT-LCD module with a projected capacitive touch panel (PCAP). This TFT module features IPS technology, offering advantages such as a wider viewing angle (Left: 85 / Right: 85 / Up: 85 / Down: 85 degrees typical) and a high brightness of 900 cd/m² (typical value) with a contrast ratio of 800:1. If customers do not require high brightness, the WF101JTYAHMNB0 is also available. The WF101J MIPI model is also available in resistive touch screen options, including the WF101JTYAHMNT0 (normally) and WF101JSYAHMNT0 (high brightness).

The WF101JSYAHMNB0 module is equipped with EK79007AD3 and EK73217BCGA driver ICs and supports a 4-Lane MIPI (Mobile Industry Processor Interface) DSI (Display Serial Interface). The capacitive touch panel is integrated with the ILI2511 IC, which supports both USB and I2C interfaces. The MIPI DSI interface has become increasingly popular due to its characteristics, such as high-speed data transmission and high-speed clock transmission. This TFT display module features a 16:9 aspect ratio and operates at temperatures ranging from -20℃ to +70℃, with storage temperatures from -30℃ to +80℃.

DRAWING

10.1-inch High Brightness IPS MIPI TFT Display with PCAP (1024x600) - WF101JSYAHMNB0

SPECIFICATIONS

General Specifications

Item Dimension Unit
Size 10.1 inch
Dot Matrix 1024 RGB x 600 dots
Module dimension 235(W) x 143(H) x 8.78(D) mm
Active area 222.72 (H) x 125.28(V) mm
Pixel pitch 0.2175(W) x 0.2088(H) mm
LCD type TFT, Normally Black, Transmissive
Interface 4-Lanes MIPI
Driver IC EK79007AD3 + EK73217BCGA or equivalent
Viewing Angle 85/85/85/85
Aspect Ratio 16:9
Backlight Type LED, Normally White
PCAP IC ILI2511 or equivalent
PCAP Interface USB (I2C available)
PCAP FW Version: V6.0.0.0.62.90.1.2
Touch Panel Projected Capacitive Touch Screen, PCAP
Surface Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Electrical Characteristics

Typical Operation Conditions (At Ta = 25 °C,)

Item Symbol Min. Typ. Max. Unit
Digital Power Supply Voltage For LCD VDD 1.71 1.8 1.89 V
Analog Power Supply Voltage AVDD 9.89 10.2 10.5 V
Gate On Power Supply Voltage VGH 19.4 20.0 20.6 V
Gate Off Power Supply Voltage VGL -10.3 -10.0 -9.7 V
Common Power Supply Voltage VCOMI 4.0 4.3 4.6 V
Supply PCAP VDDT 3.0 3.3 3.6 V
IVDDT   90.5 115 mA
USB_VDD 5V 4.4 5.0 5.5 V
I VDD 5V 97.8 120 mA

Interface

TFT LCD Module

Pin No. Symbol Description
1 VLED+ LED Anode
2 VLED+ LED Anode
3 VGH Positive power for TFT
4 VGL Negative power for TFT
5 UPDN Gate up or down scan control.
UPDN = ”L”, STV2 output vertical start pulse and UD pin output logical “L” to Gate driver. (default)
UPDN = ”H”, STV1 output vertical start pulse and UD pin output logical “H” to Gate driver
6 SHLR Source right or left sequence control.
SHLR = ”L“, shift left: last data = S1←S2←S3….......←S1536 = first data.
SHLR = ”H“, shift right: first data = S1→S2→S3….....→S1536 = last data.(default)
7 VLED- LED Cathode
8 VLED- LED Cathode
9 AVDD Analog power
10 GND Digital ground
11 D3P MIPI data input.
12 D3N MIPI data input.
13 GND Digital ground
14 D2P MIPI data input.
15 D2N MIPI data input.
16 GND Digital ground
17 CLKP MIPI clock input
18 CLKN MIPI clock input
19 GND Digital ground
20 D1P MIPI data input.
21 D1N MIPI data input.
22 GND Digital ground
23 D0P MIPI data input.
24 D0N MIPI data input.
25 GND Digital ground
26 STBYB Standby mode.
STBYB = ”H“,normal operation(default)
STBYB = ”L”, timing controller, source driver will turn off, all output are GND.
27 RESET Global reset pin. Active Low to enter Reset State. Normally pull high. Connecting with an RC reset circuit for stability.
28 VDD (1.8V) Digital power
29 VDD (1.8V) Digital power
30 VCOMI Common voltage
 

PCAP PIN Definition

Pin Symbol Function
1 USB_VSS System ground
2 USB_VDD 5V Power supply
3 USB_D+ Data +
4 USB_D- Data -
5 VSS System ground
6 SDA I2C data input and output
7 SCL I2C clock input
8 RST External Reset, Low is active
9 INT External interrupt to the host
10 VDDT 3.3 Power supply

Related Products

go top
close

We value your privacy

By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.

We value your privacy

Winstar and certain third parties use cookies on www.winstar.com.tw. The details regarding the types of
cookies, their purpose and the third parties involved are described below and in our Cookie Policy.
Please click on “Allow All” to consent to our usage of cookies in order to have the best possible
experience on our websites. You can also set your preferences or reject cookies (except for strictly
necessary cookies).

Manage Consent Preferences

Always Active
Essential Cookies

These cookies are essential in order to enable you to move around the website and use its
features, such as setting your privacy preferences, logging in or filling in forms.

Analytics Cookies

Also known as “statistics cookies,” these cookies collect information about how you use a website, like which pages you visited and which links you clicked on. See Detail