Startseite Produkte TFT-LCDs High Brightness TFT Display WF101JSYAHMNB0

High Brightness IPS MIPI 1024x600 10,1 Zoll PCAP TFT Display

Modellnummer WF101JSYAHMNB0

►10,1 zoll display
►Auflösung: 1024×600 Punkten
►Betrachtungsrichtung: IPS
►Schnittstelle: MIPI DSI
►Treiber IC : EK79007AD3+EK73217BCGA
►Steuerplatine: Nein
►Helligkeit(cd/m2) : 900
►Durchsteckrahmen: Nein
►Touchscreen: Projiziert Kapazitiver Touchscreen (PCAP)
►Detect Point : 5 Fingers

Zeichnung

High Brightness 10.1 inch IPS MIPI TFT Display 1024x600 with PCAP - WF101JSYAHMNB0

Technische Daten

Schnittstelle

TFT LCD Module

Pin No. Symbol Funktion
1 VLED+ LED Anode
2 VLED+ LED Anode
3 VGH Positive power for TFT
4 VGL Negative power for TFT
5 UPDN Gate up or down scan control.
UPDN = ”L”, STV2 output vertical start pulse and UD pin output logical “L” to Gate driver. (default)
UPDN = ”H”, STV1 output vertical start pulse and UD pin output logical “H” to Gate driver
6 SHLR Source right or left sequence control.
SHLR = ”L“, shift left: last data = S1←S2←S3….......←S1536 = first data.
SHLR = ”H“, shift right: first data = S1→S2→S3….....→S1536 = last data.(default)
7 VLED- LED Cathode
8 VLED- LED Cathode
9 AVDD Analog power
10 GND Digital ground
11 D3P MIPI data input.
12 D3N MIPI data input.
13 GND Digital ground
14 D2P MIPI data input.
15 D2N MIPI data input.
16 GND Digital ground
17 CLKP MIPI clock input
18 CLKN MIPI clock input
19 GND Digital ground
20 D1P MIPI data input.
21 D1N MIPI data input.
22 GND Digital ground
23 D0P MIPI data input.
24 D0N MIPI data input.
25 GND Digital ground
26 STBYB Standby mode.
STBYB = ”H“,normal operation(default)
STBYB = ”L”, timing controller, source driver will turn off, all output are GND.
27 RESET Global reset pin. Active Low to enter Reset State. Normally pull high. Connecting with an RC reset circuit for stability.
28 VDD (1.8V) Digital power
29 VDD (1.8V) Digital power
30 VCOMI Common voltage

PCAP PIN Definition

Pin Symbol Funktion
1 USB_VSS System ground
2 USB_VDD 5V Power supply
3 USB_D+ Data +
4 USB_D- Data -
5 VSS System ground
6 SDA I2C data input and output
7 SCL I2C clock input
8 RST External Reset, Low is active
9 INT External interrupt to the host
10 VDDT 3.3 Power supply

Allgemeine Spezifikationen

Artikel Ausmaß Einheit
Größe 10,1 Zoll
Punktmatrix 1024 RGB x 600 Punkte
Abmaße der modul 235(W) x 143(H) x 8,78(D) mm
Aktiver Bereich 222,72 (H) x 125,28(V) mm
Punktabstand 0,2175(W) x 0,2088(H) mm
LCD Typ TFT, schwarz, Transmissiv
Schnittstelle 4-Lanes MIPI
Treiber IC EK79007AD3 + EK73217BCGA oder gleichwertig
Blickwinkel 85/85/85/85
Seitenverhältnis 16:9
Hintergrundbeleuchtung Typ LED, Weiß
PCAP IC ILI2511 oder gleichwertig
PCAP Schnittstelle USB (I2C available)
PCAP FW Version V6.0.0.0.62.90.1.2
Touchscreen projiziert-kapazitiven Touchscreen,PCAP
Oberfläche Glanz

absolute Grenzwerte

Artikel Symbol Mindestwert typischer Wert Maximalwert Einheit
Betriebstemperatur TOP -20 +70
Lagertemperatur TST -30 +80

elektrische Eigenschaften

Typical Operation Conditions (At Ta = 25 °C,)

Artikel Symbol Mindestwert typischer Wert Maximalwert Einheit
Digital Power Supply Voltage For LCD VDD 1,71 1,8 1,89 V
Analog Power Supply Voltage AVDD 9,89 10,2 10,5 V
Gate On Power Supply Voltage VGH 19,4 20,0 20,6 V
Gate Off Power Supply Voltage VGL -10,3 -10,0 -9,7 V
Common Power Supply Voltage VCOMI 4,0 4,3 4,6 V
Supply PCAP VDDT 3,0 3,3 3,6 V
IVDDT   90,5 115 mA
USB_VDD 5V 4,4 5,0 5,5 V
I VDD 5V 97,8 120 mA
go top
close