Model No. WF52CTLBSDBN0
►Size : 5.2 inch
►Resolution : 480 x 128 dots
►View Direction : 6H
►Interface : 8080, MPU
►Controller IC：MR6566
►Control-Board : Yes
►Brightness (cd/m²): 500
►Frame Through Hole : No
►Touch Panel : Without Touch Panel
►O-Film : No
WF52CTLBSDBN0 is a 5.2-inch bar-type TFT LCD featuring a controller board with screw holes. The module has a resolution of 480×128 pixels and a brightness of 500 nits (typical value). It uses the MR6566 controller IC, supporting MCU 8080 8-bit interfaces. The supply voltage for logic is between 4.5V and 5.5V, with a typical value of 5V.
Customers currently using a 240x64 STN display with the RA6963 controller IC can upgrade to the WF52CTLBSDBN0 module without changing the interfaces or firmware, easily transitioning from a monochrome display to a color TFT.
The WF52CTLBSDBN0 can operate at temperatures ranging from -20°C to +70°C, with storage temperatures from -30°C to +80°C.
| Item | Dimension | Unit |
|---|---|---|
| Size | 5.2 | inch |
| Dot Matrix | 480 × RGB × 128 | dots |
| Module dimension | 180.0 × 65.0 × 11.1 | mm |
| Active area(AA) | 127.152 × 33.9072 | mm |
| Dot pitch | 0.0883 × 0.2649 | mm |
| LCD type | TFT, Normally White, Transmissive | |
| View Direction | 6 o'clock | |
| Gray Scale Inversion Direction | 12 o'clock | |
| Aspect Ratio | Bar Type | |
| Backlight Type | LED, Normally White | |
| Controller IC | MR6566 | |
| Interface | Digital 8080 family MPU 8bit | |
| Touch Panel | Without touch panel | |
| Surface | Glare | |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -20 | － | +70 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Supply Voltage For LCM | VDD5V | 4.5 | 5.0 | 5.5 | V |
| Supply Current For LCM | IDD | － | 500 | 750 | mA |
| LED Life Time | 50,000 | - | － | Hr |
| Pin | Symbol | Function |
|---|---|---|
| 1 | GND | Ground |
| 2 | NC | No connect |
| 3 | NC | No connect |
| 4 | D/C | Data/Command select |
| 5 | WR | Write control |
| 6 | RD | Read control |
| 7 | DB0 | Data bus |
| 8 | DB1 | Data bus |
| 9 | DB2 | Data bus |
| 10 | DB3 | Data bus |
| 11 | DB4 | Data bus |
| 12 | DB5 | Data bus |
| 13 | DB6 | Data bus |
| 14 | DB7 | Data bus |
| 15~24 | NC | No Connect |
| 25 | CS | Chip Select |
| 26 | RESET | Reset |
| 27 | LR | Right /Left selection; Default R/L is Pull High |
| 28 | UD | Up/down selection; Default U/D is Pull High |
| 29~32 | NC | No connection |
| 33~34 | GND | Ground |
| 35~36 | VDD5V | Power Supply (+5V) |
| Pin | Symbol | Function |
|---|---|---|
| 1 | FG | System round pin of the IC. Connect to system ground |
| 2 | GND | Ground |
| 3 | VDD5V | Power Supply (+5V) |
| 4 | NC | No connect |
| 5 | WR | Write control |
| 6 | RD | Read control |
| 7 | CS | Chip select |
| 8 | D/C | Data/Command select |
| 9 | NC | No connection |
| 10 | RESET | Reset |
| 11 | DB0 | Data bus |
| 12 | DB1 | Data bus |
| 13 | DB2 | Data bus |
| 14 | DB3 | Data bus |
| 15 | DB4 | Data bus |
| 16 | DB5 | Data bus |
| 17 | DB6 | Data bus |
| 18 | DB7 | Data bus |
| 19~20 | NC | No connection |
| 21 | VDD5V | Power Supply (+5V) |
| 22 | GND | Ground. |
| 23~25 | NC | No connection |
| 26 | GND | Ground |
| Pin | Symbol | Function |
|---|---|---|
| 1 | 5V | Power 5V |
| 2 | D- | Data line - |
| 3 | D+ | Data line + |
| 4 | NC | No connection |
| 5 | GND | Power Ground |
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.
