Model No. WF35XTYBCDBN0
►Size: 3.5"
►Resolution : 320 x 240 dots
►View Direction : IPS
►Interface : MCU
►Controller IC：SSD1963
►Control-Board : Yes
►Brightness(cd/m²) : 500
►Frame Through Hole : Yes
►Touch Screen : No
The WF35XTYBCDBN0 is a 3.5-inch TFT LCD display module with a control board, featuring IPS panel technology for superior color accuracy and wide viewing angles of 80° in all directions. With a resolution of 320x240 pixels and an aspect ratio of 4:3, this module includes an SSD1963 controller board and supports both 8080 family MPU 8-bit and 16-bit interface options. The module also features frame through holes for easy mounting and usage, and pins 33 to 36 are pre-defined for backlight supply, eliminating the need for extra backlight circuit design.
| Item | Dimension | Unit |
|---|---|---|
| Size | 3.5 | inch |
| Dot Matrix | 320 × RGB × 240(TFT) | dots |
| Module dimension | 93.5 × 66.44 × 7.67 | mm |
| Active area | 70.08 × 52.56 | mm |
| Dot pitch | 0.073 ×0.219 | mm |
| LCD type | TFT, Normally Black, Transmissive | |
| View Direction | 80/80/80/80 | |
| Aspect Ratio | 4:3 | |
| Backlight Type | LED, Normally White | |
| Controller IC | SSD1963 | |
| Interface | Digital 8080 family MPU 8bit/16bit | |
| Touch Panel | Without touch panel | |
| Surface | Glare | |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -20 | － | +70 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Supply Voltage For LCM | VDD | 3.0 | 3.1 | 3.3 | V |
| Supply Current For LCM | IDD | － | 50 | 75 | mA |
| Pin | Symbol | Function |
|---|---|---|
| 1 | GND | System ground pin of the IC.Connect to system ground. |
| 2 | VDD | Power Supply : +3.3V |
| 3 | BL_E | Backlight control signal , H: On \ L: Off |
| 4 | D/C | Data/Command select |
| 5 | WR | Write strobe signal |
| 6 | RD | Read strobe signal |
| 7 | DB0 | Data bus |
| 8 | DB1 | Data bus |
| 9 | DB2 | Data bus |
| 10 | DB3 | Data bus |
| 11 | DB4 | Data bus |
| 12 | DB5 | Data bus |
| 13 | DB6 | Data bus |
| 14 | DB7 | Data bus |
| 15 | DB8 | Data bus (When select 8bits Mode, this pin is NC) |
| 16 | DB9 | Data bus (When select 8bits Mode, this pin is NC) |
| 17 | DB10 | Data bus (When select 8bits Mode, this pin is NC) |
| 18 | DB11 | Data bus (When select 8bits Mode, this pin is NC) |
| 19 | DB12 | Data bus (When select 8bits Mode, this pin is NC) |
| 20 | DB13 | Data bus (When select 8bits Mode, this pin is NC) |
| 21 | DB14 | Data bus (When select 8bits Mode, this pin is NC) |
| 22 | DB15 | Data bus (When select 8bits Mode, this pin is NC) |
| 23-24 | NC | No connect |
| 25 | CS | Chip select |
| 26 | RESET | Hardware reset |
| 27-32 | NC | No connect |
| 33-34 | VLED- | VLED- for B/L LED inverter (GND) |
| 35-36 | VLED+ | VLED+ for B/L LED inverter (+3.3V) |
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.
