Home Products TFT LCD TFT Panel + Controller Board WF35QTIBCDBG0

3.5" PCAP Touchscreen TFT with LCD Controller Board


►Touchscreen TFT 3.5"
►Resolution : 320 x 240 dots
►View Direction : 12H
►Interface : MCU
►Controller IC:SSD1963
►Control-Board : Yes
►Brightness(cd/m²) : 340
►Frame Through Hole : Yes
►Touch Screen : Projected capacitive touchscreen (PCAP)
►Detect Point : 5 Fingers


The Touchscreen TFT LCD model WF35QTIBCDBG0 is our 3.5 inch WF35L extended model TFT LCD display with SSD1963 controller board plus a 36 pin-out connector. This model is with Projected capacitive touch screen (PCAP), it's available in 8 bit or 16 bit option and already defined pin no. 33 ~ 36 as backlight supply on this SSD1963 LCD controller board, therefore, there is no need to design extra backlight circuit. The TFT Q Series Modules provide the following innovative advantages to offer outstanding performance for colorful displays:

  • Q Series integrated a 36 pin-out connector on SSD1963 controller board and all connectors are the same direction.
  • Q Series modules are available in 8 bit and 16 bit parallel interface options.
  • The pin no. 33 ~ 36 already pre-defined as backlight supply.
  • Built in backlight driver IC, Q series TFT displays can be drive by 5.0V (3.5" and 4.3" also support 3.3V). The customers do not have to change the backlight driver circuits while change the TFT module sizes.
  • The 5.7", 7.0", 8.0"and 10.2" Q Series are allowed to design “Sleep Mode” to close BIAS(VGH, VGL, AVDD) low power consumption mode.
  • Capacitive Touchscreen TFT options are available for all Q Series display, and the I2C read/write protocol can be input from 36pin connector.


3.5 PCAP Touchscreen TFT with LCD Controller Board - WF35QTIBCDBG0



Pin Symbol Function
1 GND System ground pin of the IC. Connect to system ground.
2 VDD Power Supply : +3.3V
3 BL_E Backlight control signal , H: On \ L: Off
4 D/C Data/Command select
5 WR Write strobe signal
6 RD Read strobe signal
7~14 DB0~DB7 Data bus
15~22 DB8~DB15 Data bus (When select 8bits Mode, this pin is NC)
23 NC No connect
24 CTP_INT External interrupt to the host
25 CS Chip select
26 RST Hardware reset (RESET#)
27~28 NC No connect
29 CTP_SCL I2C clock input
30 CTP_SDA I2C data input and output
31 CTP_RST External Reset, Low is active
32 NC No connect
33~34 VLED- VLED- for B/L LED inverter (GND)
35~36 VLED+ VLED+ for B/L LED inverter(+3.3V)

General Specifications

Item Dimension Unit
Size 3.5 inch
Dot Matrix 320 × RGB × 240(TFT) dots
Module dimension 93.5 × 66.44 × 8.89 mm
Active area 70.08 × 52.56 mm
Dot pitch 0.073 × 0.219 mm
LCD type TFT, Normally White, Transmissive
View Direction 12 o'clock
Gray Scale Inversion Direction 6 o'clock
Aspect Ratio 4:3
Backlight Type LED, Normally White
Controller IC SSD1963
Interface Digital 8080 family MPU 8bit/16bit
PCAP IC ILI2130 or equivalent
PCAP Interface I2C
PCAP FW Version 0x07.0x00.0x00.0x00.0x00.0x35.0x5A.0x01
PCAP Resolution 16384*16384
Touchscreen Projected capacitive touchscreen (PCAP)
Surface Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Electrical Characteristics

Item Symbol Condition Min Typ Max Unit
Supply Voltage For LCM VDD 3.0 3.1 3.3 V
Supply Current For LCM IDD 210 350 mA

Search keyword: tft 3.5, tft 3.5", 3.5 tft lcd, 3.5" tft lcd, 3.5 inch tft lcd, tft lcd 3.5, 3.5 tft display, 3.5" tft display, 3.5 inch tft display, tft display 3.5, tft display 3.5"

Related Products

go top