Home Products TFT LCD TFT Panel + Controller Board WF35QTIBCDBT0

Resistive Touch Screen TFT 3.5" with Controller Board

Model No. WF35QTIBCDBT0

►Size: 3.5"
►Resolution : 320 x 240 dots
►View Direction : 12H
►Interface : MCU
►Controller IC:SSD1963
►Control-Board : Yes
►Brightness(cd/m²) : 300
►Frame Through Hole : Yes
►Touch Screen : Resistive Touch Screen TFT

Description

The WF35QTIBCDBT0 is a 3.5-inch resistive touch screen TFT LCD display module with a control board. It has a resolution of 320x240 pixels and an aspect ratio of 4:3. This TFT module includes an SSD1963 controller board and is available in 8080 family MPU 8-bit or 16-bit interface options. Pin numbers 33 to 36 are pre-defined as the backlight supply, so there is no need to design an extra backlight circuit. The module includes frame through holes for easy mounting and usage.

The Winstar TFT Q Series Modules provide the following innovative advantages to offer outstanding performance for colorful displays:

  • The Q Series integrates a 36-pin connector on the SSD1963 controller board, and all connectors are oriented in the same direction.
  • The Q Series modules are available in 8080 family MPU 8-bit and 16-bit parallel interface options.
  • Pins 33 to 36 are already pre-defined as the backlight supply.
  • With a built-in backlight driver IC, Q series TFT displays can be driven by 5V (the 3.5" and 4.3" also support 3.3V). Customers do not have to change the backlight driver circuits when changing the TFT module sizes.
  • The 5.7”, 7.0”, 8.0”, and 10.2” Q Series allow for the design of a “Sleep Mode” to close BIAS (VGH, VGL, AVDD) for low power consumption.
  • Resistive touch screen options are available for all Q Series displays, and a 4-line signal (X1, Y1, X2, Y2) can be input from the 36-pin connector.
  • Capacitive touch screen options are available for all Q Series displays, and the I2C read/write protocol can be input from the 36-pin connector.
 

The WF35QTIBCDBT0 resistive touch screen TFT module operates in temperatures ranging from -20℃ to +70℃, and its storage temperature ranges from -30℃ to +80℃. The LCM power supply voltage is 3.0V to 3.3V, with a typical value of 3.1V. The module has a brightness of 300 nits and a contrast ratio of 350:1 (typical value).

DRAWING

Resistive Touch Screen TFT 3.5, LCD Controller Board - WF35QTIBCDBT0

SPECIFICATIONS

Interface

Pin Symbol Function
1 GND System ground pin of the IC. Connect to system ground.
2 VDD Power Supply : +3.3V
3 BL_E Backlight control signal , H: On \ L: Off
4 D/C Data/Command select
5 WR Write strobe signal
6 RD Read strobe signal
7~14 DB0~DB7 Data bus
15~22 DB8~DB15 Data bus (When select 8bits Mode, this pin is NC)
23~24 NC No connect
25 CS Chip select
26 RST Hardware reset
27~28 NC No connect
29 XL Left electrode
30 YU Top electrode
31 XR Right electrode
32 YD Down electrode
33~34 VLED- VLED- for B/L LED inverter (GND)
35~36 VLED+ VLED+ for B/L LED inverter(+3.3V)

General Specifications

Item Dimension Unit
Size 3.5 inch
Dot Matrix 320 × RGB × 240 (TFT) dots
Module dimension 93.5 × 66.44 × 8.5 mm
Active area 70.08 × 52.56 mm
Dot pitch 0.073 × 0.219 mm
LCD type TFT, Normally White, Transmissive
View Direction 12 o'clock
Gray Scale Inversion Direction 6 o'clock
Backlight Type LED, Normally White
Controller IC SSD1963
Interface Digital 8080 family MPU 8bit/16bit
Touch Screen Resistive touch screen (RTP)
Surface Anti-Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Electrical Characteristics

Item Symbol Condition Min Typ Max Unit
Supply Voltage For LCM VDD 3.0 3.1 3.3 V
Supply Current For LCM IDD 200 300 mA

Search keyword: tft 3.5, tft 3.5", 3.5 tft lcd, 3.5" tft lcd, 3.5 inch tft lcd, tft lcd 3.5, 3.5 tft display, 3.5" tft display, 3.5 inch tft display, tft display 3.5, tft display 3.5"

Related Products

go top
close

We value your privacy

By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.

We value your privacy

Winstar and certain third parties use cookies on www.winstar.com.tw. The details regarding the types of
cookies, their purpose and the third parties involved are described below and in our Cookie Policy.
Please click on “Allow All” to consent to our usage of cookies in order to have the best possible
experience on our websites. You can also set your preferences or reject cookies (except for strictly
necessary cookies).

Manage Consent Preferences

Always Active
Essential Cookies

These cookies are essential in order to enable you to move around the website and use its
features, such as setting your privacy preferences, logging in or filling in forms. See
Detail.

Analytics Cookies

Also known as “statistics cookies,” these cookies collect information about how you use a website, like which pages you visited and which links you clicked on. See Detail