Model No. WF52ATLASDNN0
►Size : 5.2”
►Resolution : 480x128 dots
►View Direction : 6H
►Interface : RGB
►Driver IC : ST7252
►Control-Board : No
►Brightness(cd/m²): 500
►Frame Through Hole : No
►Touch Screen : Without Touch Screen
The WF52ATLASDNN0 is a 5.2-inch bar type TFT LCD display with a resolution of 480x128 pixels, making it an ideal choice for industrial equipment, automotive applications, server systems, POS systems, and advertising displays.
It features a view area of 133.4 x 39.4 mm and an active area of 127.152 x 33.9072 mm, closely matching our monochrome graphic model WG24064A, as both share a 5.2-inch diagonal size.
This model consists of the TFT panel only, without an onboard PCB. It is built with the ST7252 or an equivalent driver IC and supports a 24-bit RGB parallel interface in SYNC mode, using HSYNC and VSYNC signals to synchronize the display timing.
For customers who require a PCB with screw holes and the same module dimensions as the WG24064A, we recommend the WF52ATLBSDBN0. For more information, please refer to the next introduction.
The WF52ATLASDNN0 offers a contrast ratio of 500:1 and a typical brightness of 500 cd/m², along with a 50,000-hour LED backlight lifetime. It is designed to operate in temperatures ranging from -20°C to +70°C, and can be stored between -30°C and +80°C, making it suitable for a wide range of demanding environments.
| Item | Dimension | Unit |
|---|---|---|
| Size | 5.2 | inch |
| Dot Matrix | 480 × RGB × 128 | dots |
| Module dimension | 140.4 × 49.87 × 3.0 | mm |
| Active area | 127.152 × 33.9072 | mm |
| Dot pitch | 0.0883 × 0.2649 | mm |
| LCD type | TFT, Normally White, Transmissive | |
| View Direction | 6 o'clock | |
| Gray Scale Inversion Direction | 12 o'clock | |
| Backlight Type | LED, Normally White | |
| Driver IC | ST7252 Or Equal | |
| Interface | RGB 24bit | |
| Touch Panel | Without touch panel | |
| Surface | Glare | |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -20 | － | +70 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
| Item | Symbol | Condition | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage For Logic | VDD | － | 3.0 | 3.3 | 3.6 | V |
| Digital operation current | IDD | - | － | 20 | － | mA |
| Pin | Symbol | Function |
|---|---|---|
| 1 | VLED- | Power for LED backlight cathode |
| 2 | VLED+ | Power for LED backlight anode |
| 3 | GND | Power ground |
| 4 | VCC | Power voltage |
| 5 | R0 | Red data (LSB) |
| 6~11 | R1~R6 | Red data |
| 12 | R7 | Red data (MSB) |
| 13 | G0 | Green data (LSB) |
| 14~19 | G1~G6 | Green data |
| 20 | G7 | Green data (MSB) |
| 21 | B0 | Blue data (LSB) |
| 22~27 | B1~B6 | Blue data |
| 28 | B7 | Blue data (MSB) |
| 29 | GND | Power ground |
| 30 | CLK | Pixel clock (DCLK) |
| 31 | LR | Right /Left selection; Default R/L=High |
| 32 | HSYNC | Horizontal sync signal; negative polarity |
| 33 | VSYNC | Vertical sync signal; negative polarity |
| 34 | NC | No connection |
| 35 | UD | Up/down selection; Default U/D=High |
| 36 | RESET | Reset signal |
| 37~40 | NC | No connection |
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.
