5.2 inch Stretched Bar LCD Display Module with Capacitive Touch Panel
Model No. WF52ATLASDNG0
►Size : 5.2”
►Resolution : 480x128 dots
►View Direction : 6H
►Interface : RGB
►Driver IC : ST7252 Or Equal
►Control-Board : No
►Brightness(cd/m²): 400
►Frame Through Hole : No
►Touch Screen : Projected capacitive touch panel (PCAP)
►Detect Point : 5 Fingers
Description
WF52ATLASDNG0 is a 5.2-inch bar-type TFT LCD with a Projected Capacitive Touch Panel (PCAP). It has a resolution of 480×128 dots and a 400 cd/m2 brightness. Its module dimension is 140.4 × 49.87 × 4.96 mm with an active area of 127.152 × 33.9072 mm. The display features a glare surface, 6 o'clock view direction, and 12 o'clock gray scale inversion direction.
WF52ATLASDNG0 comes with a Projected Capacitive Touch Panel (PCAP), which can simultaneously detect 5 points of contact. In addition, the module is built-in with ST7252 driver IC, supporting 24-bit RGB interfaces. The supply voltage for LCM (VCC) is from 3.0V to 3.6V (typical value: 3.3V). This bar TFT can operate at a temperature range from -20℃ to +70℃, and its storage temperatures are from -30℃ to +80℃.
WF52ATLASDNG0 comes with a Projected Capacitive Touch Panel (PCAP), which can simultaneously detect 5 points of contact. In addition, the module is built-in with ST7252 driver IC, supporting 24-bit RGB interfaces. The supply voltage for LCM (VCC) is from 3.0V to 3.6V (typical value: 3.3V). This bar TFT can operate at a temperature range from -20℃ to +70℃, and its storage temperatures are from -30℃ to +80℃.
DRAWING
SPECIFICATIONS
Interface
Pin | Symbol | Function |
---|---|---|
1 | VLED- | Power for LED backlight cathode |
2 | VLED+ | Power for LED backlight anode |
3 | GND | Power ground |
4 | VCC | Power voltage |
5 | R0 | Red data (LSB) |
6~11 | R1~R6 | Red data |
12 | R7 | Red data (MSB) |
13 | G0 | Green data (LSB) |
14~19 | G1~G6 | Green data |
20 | G7 | Green data (MSB) |
21 | B0 | Blue data (LSB) |
22~27 | B1~B6 | Blue data |
28 | B7 | Blue data (MSB) |
29 | GND | Power ground |
30 | CLK | Pixel clock (DCLK) |
31 | LR | Right /Left selection; Default R/L is Pull High |
32 | HSYNC | Horizontal sync signal; negative polarity |
33 | VSYNC | Vertical sync signal; negative polarity |
34 | NC | No connection |
35 | UD | Up/down selection; Default U/D is Pull High |
36 | RESET | Reset signal |
37~40 | NC | No connection |
General Specifications
Item | Dimension | Unit |
---|---|---|
Size | 5.2 | inch |
Dot Matrix | 480 × RGB × 128 | dots |
Module dimension | 140.4 × 49.87 × 4.96 | mm |
Active area | 127.152 × 33.9072 | mm |
Dot pitch | 0.0883 × 0.2649 | mm |
LCD type | TFT, Normally White, Transmissive | |
View Direction | 6 o'clock | |
Gray Scale Inversion Direction | 12 o'clock | |
Aspect Ratio | Bar Type | |
Backlight Type | LED, Normally White | |
Driver IC | ST7252 Or Equal | |
Interface | RGB 24bit | |
With /Without TP | Projected capacitive touch screen (PCAP) | |
Surface | Glare |
Absolute Maximum Ratings
Item | Symbol | Min | Typ | Max | Unit |
---|---|---|---|---|---|
Operating Temperature | TOP | -20 | - | +70 | ℃ |
Storage Temperature | TST | -30 | - | +80 | ℃ |
Electrical Characteristics
Item | Symbol | Condition | Min | Typ | Max | Unit |
---|---|---|---|---|---|---|
Supply Voltage For LCM | VCC | - | 3.0 | 3.3 | 3.6 | V |
Supply Voltage For Touch | VDDT | - | 2.8 | - | 3.3 | V |
Supply Current For LCM | ICC | - | - | 20 | - | mA |
Search keyword: tft 5.2, tft 5.2", 5.2 tft lcd, 5.2" tft lcd, 5.2 inch tft lcd, tft lcd 5.2, 5.2 tft display, 5.2" tft display, 5.2 inch tft display, tft display 5.2, tft display 5.2", 5.2 tft lcd,bar type tft