Used for Arduino TFT Display 4.3" with PCAP Touch


►WF43WTYBEDSG0 : Built-in storage device (FLASH)
►WF43WTYBEDSG0#000 : Control Signal 5V; Without built-in storage device (FLASH); Support SD connector, Pin CON1~CON4 are used for Arduino Uno Rev3
►Size: 4.3 inch
►Resolution : 480×272 dots
►View Direction : IPS
►Interface : SPI/QSPI
►Driver IC : BT815
►Control-Board : Yes
►Brightness(cd/m²) : 400
►Frame Through Hole : Yes
►Touch Panel : Projected Capacitive Touch Screen
►Detect Point : 5 Fingers
►Operating Temperature : -20~+70°C


WF43WTYBEDSG0 is a 4.3-inch IPS TFT-LCD display with a Capacitive Touch screen, made of resolution 480x272 pixels. This module is built-in with BT815 controller IC, and it supports SPI and QSPI interfaces. The QSPI interface can achieve four times data rate compared with the current SPI interface and make a smoother display accordingly. The series of BT815/6 controller IC with EVE (Embedded Video Engine) technology simplifies the system architecture, Eve technology is a revolutionary concept that utilizes an object-oriented approach to creating high-quality human-machine interfaces (HMI). This new technology supports display, audio and touch, enabling engineers to quickly and efficiently design HMI and provide a powerful solution for high-resolution displays that reduce material costs.

WF43WTYBEDSG0 is adopted IPS panel which is having the advantage of wider view angle of Left:80 / Right:80 / Up:80 / Down:80 degree (typical), contrast ratio 800:1 (typical value), brightness 400 nits (typical value), glare surface panel, aspect ratio 16:9. The PCAP touch screen is built-in with ILI2130 IC, supporting I2C interface and multi-touch function.

We offer the TFT module WF43WTYBEDSG0#000 designed to support the Arduino board. The control signal for WF43WTYBEDSG0 is 3.3V; it has a built-in storage device (FLASH 32M). The control signal of WF43WTYBEDSG0#000 is 5V; without a built-in storage device (FLASH); but with a MicroSD Socket, pins CON1~CON4 are designed for SPI control (such as for Arduino Uno Rev3). WF43W model can be operating at temperatures from -20℃ to+ 70℃ and storage temperatures from -30℃ to +80℃.


WF43WTYBEDSG0# Spec Download   ►WF43WTYBEDSG0#000 Spec Download


Arduino TFT Display 4.3 inch,  TFT LCD Display Used for Arduino - WF43WTYBEDSG0


Data source ref: WF43WTYBEDSG0



LCM PIN Definition (CON5)

Pin Symbol I/O Function
1 VDD P 3.3V power supply input
2 GND P Ground
3 SCK I SPI clock input
4 MISO O SPI Single mode: SPI MISO output
SPI Dual/Quad mode: SPI data line 1
5 MOSI I SPI Single mode: SPI MOSI input
SPI Dual/Quad mode: SPI data line 0
6 CS I SPI slave select input
7 INT OD/O Interrupt to host, open drain output(default) or push-pull output, active low
8 PD_N I Chip power down mode control input, active low. Connect to MCU GPIO for power management or hardware reset function
9 GPIO2 I/O General purpose IO 2
10 GPIO3 I/O General purpose IO 3
11 IO2 I/O SPI Single/Dual mode: General purpose IO 0
SPI Quad mode: SPI data line 2
12 IO3 I/O SPI Single/Dual mode: General purpose IO 1
SPI Quad mode: SPI data line 3
13 CSCL I Connect to I2C SCL pin of the CTP(ILI2130)
14 CSDA I/O Connect to I2C SDA pin of the CTP(ILI2130) 
15 CRST I Connect to reset pin of the CTP(ILI2130) 
16 CINT O Connect to interrupt pin of the CTP(ILI2130)
17 VLED P 5V power supply input
18 VLED P 5V power supply input
19 GND P Ground
20 GND P Ground

General Specifications

Item Dimension Unit
Size 4.3 inch
Dot Matrix 480 x RGB x272(TFT) dots
Module dimension 123.5 (W) x 67.2 (H) x 14.73(D)(MAX) mm
Active area 95.04 x 53.856 mm
Pixel pitch 0.198(H) x 0.198(V) mm
LCD type TFT, Normally Black, Transmissive
Viewing Angle 80/80/80/80
Aspect Ratio 16:9
Backlight Type LED, Normally White
TFT Controller IC BT815
TFT Interface SPI/QSPI
PCAP FW Version 0x07.0x00.0x00.0x00.0x01.0x0C.0x11.0x43
PCAP IC ILI2130 or equivalent
PCAP Interface I2C
PCAP Resolution 16384*16384
Touch Panel With PCAP
Surface Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Electrical Characteristics

Item Symbol Condition Min Typ Max Unit
Supply Voltage For VDD VDD 3.1 3.3 3.5 V
Supply Current For VDD IDD VDD=3.3V 100 150 mA
Supply Voltage For VLED VLED 4.5 5 5.5 V
Supply Current For VLED ILED VLED=+5V 200 300 mA

Search keyword: tft 4.3", 4.3 tft lcd, 4.3" tft lcd, 4.3 inch tft lcd, tft lcd 4.3, 4.3 tft display, 4.3" tft display, 4.3 inch tft display, tft display 4.3"
go top