Model No. WFN0500A4S0WADNN000
►Size : 5 inch
►Resolution : 800x480 pixels
►View Direction : IPS
►Interface : RGB
►Driver IC：FL58202DA
►Control-Board : No
►Brightness(cd/m²) : 1000
►Frame Through Hole : No
►Touch Screen : No
►Operating Temperature : -30~+80°C (Wide Temperature)
WFN0500A4S0WADNN000 is a 5-inch high brightness TFT LCD display module featuring an 800×480 pixel resolution, an IPS wide viewing angle, and a 24-bit RGB interface. Driven by the FL58202DA controller IC (or equivalent), the module is designed without a touch panel.
The module measures 120.7 × 75.8 × 2.8 mm, with an active area of 108.0 × 64.8 mm. It features a Normally Black, transmissive TFT panel with an anti-glare surface treatment.
Combining a typical brightness of 1000 cd/m² with an operating temperature range of -30℃ to +80℃, this display is suitable for smart access control systems, industrial handheld devices, smart agriculture equipment, industrial control systems, outdoor terminals, and other embedded HMI applications.
| Item | Dimension | Unit |
|---|---|---|
| Size | 5.0 | inch |
| Dot Matrix | 800 × 3(RGB) × 480 | dots |
| Module dimension | 120.7(W) × 75.8(H) × 2.8 | mm |
| Active area | 108(W) × 64.8 (H) | mm |
| Dot pitch | 0.135(W) × 0.135(H) | mm |
| LCD type | TFT, Normally Black, Transmissive | |
| View Direction | 85/85/85/85 | |
| Aspect Ratio | 5:3 | |
| Driver IC | FL58202DA or equivalent | |
| Interface | 24 bit R.G.B | |
| Backlight Type | LED, Normally White | |
| Touch Panel | Without Touch Panel | |
| Surface | Anti-Glare | |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -30 | － | +80 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
Item |
Symbol | Values | Unit | ||
|---|---|---|---|---|---|
| Min. | Typ. | Max. | |||
| Power voltage | VDD | 3.0 | 3.3 | 3.6 | V |
| Current for Driver(Black) | IDD | － | 82 | 123 | mA |
| Input logic high voltage | VIH | 0.7 VDD | － | VDD | V |
| Input logic low voltage | VIL | 0 | － | 0.3 VDD | |
Item |
Symbol | Values | Unit | ||
|---|---|---|---|---|---|
| Min. | Typ. | Max. | |||
| Voltage for LED backlight | VLED | 12.5 | 14.0 | 15.5 | V |
| Current for LED backlight | ILED | － | 60 | － | mA |
| LED life time | － | 50,000 | － | － | Hr |
FPC Connector is used for the module electronics interface.
| Pin No | Symbol | Function |
|---|---|---|
| 1 | VLED- | Power for LED backlight (Cathode) |
| 2 | VLED+ | Power for LED backlight (Anode) |
| 3 | GND | Power Ground |
| 4 | VDD | Power voltage |
| 5 | R0 | Red data (LSB) |
| 6 | R1 | Red data |
| 7 | R2 | Red data |
| 8 | R3 | Red data |
| 9 | R4 | Red data |
| 10 | R5 | Red data |
| 11 | R6 | Red data |
| 12 | R7 | Red data(MSB) |
| 13 | G0 | Green data(LSB) |
| 14 | G1 | Green data |
| 15 | G2 | Green data |
| 16 | G3 | Green data |
| 17 | G4 | Green data |
| 18 | G5 | Green data |
| 19 | G6 | Green data |
| 20 | G7 | Green data(MSB) |
| 21 | B0 | Blue data(LSB) |
| 22 | B1 | Blue data |
| 23 | B2 | Blue data |
| 24 | B3 | Blue data |
| 25 | B4 | Blue data |
| 26 | B5 | Blue data |
| 27 | B6 | Blue data |
| 28 | B7 | Blue data(MSB) |
| 29 | GND | Power Ground |
| 30 | CLK | Sample clock (DCLK) |
| 31 | DISP | Display on/off |
| 32 | NC | No connection |
| 33 | NC | No connection |
| 34 | DE | Data input enable |
| 35 | NC | No connection |
| 36 | GND | Power Ground |
| 37 | NC | No connection |
| 38 | NC | No connection |
| 39 | NC | No connection |
| 40 | NC | No connection |
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.