Model No. WL0F00050000FGDAASA00
►TFT Size: 5"
►TFT Resolution: 800×480 dots
►TFT View Direction: IPS
►TFT Touch Screen: Capacitive Touch Panel
►Communication Interface: RS485
►Protocol: Modbus
►Brightness(cd/m²): 400
WL0F00050000FGDAASA00 is a 5-inch Smart Display_RS485 series TFT, defined as a slave device controlled by a master device via RS485 command to render display content on the display screen and return touch event data with Modbus protocol data. WL0F00050000FGDAASA00 is featured with WINSTAR wide temperature TFT WF50FTWAGDNG0 and a 4-layers FR4 PCBA built-in firmware. This 5” RS485 series TFT is an easy-to-use product that allows you to develop projects rapidly in a cost-effective way. WINSTAR RS485 Smart Display support single-master (HOST) platforms, such as a computer (with USB2RS485 Dongle), MCU, and Raspberry Pi.
Smart Display products are designed with STMicroelectronics' (ST) controller which supports ST development tools like TouchGFX and STM32CubeIDE. You can also use ST tools to design WINSTAR Smart Display modules besides GUI builder.
Below are the features of this 5-inch RS485 Smart Display WL0F00050000FGDAASA00:
WINSTAR developed a Windows app. for Smart Display GUI design. WINSTAR GUI Builder software allows customers to simulate their GUI design in advance by using the drag-and-drop Widget preview function; customers can also create their ideal GUI. WINSTAR GUI builder software supports Windows systems only; it can fulfill What You See Is What You Get (WYSIWYG). The new version of built-in software is a 3-in-1 APP; we combined three application templates for optional, including industrial, vehicle and medical applications. Please press the preferred application and hold for 3 seconds at the first time power on. Customers can change to another template by using GUI Builder to change the application.
Try before you buy! Contact us to download WINSTAR GUI Builder application.
We also provide demo set with all needed accessories for you to realize your GUI design on smart displays.
| Item | Standard Value | Unit |
|---|---|---|
| LCD panel | 120.7(W) × 75.8(H) × 4.475 | mm |
| PCB | 132.7(W) × 75.8(H) × 1.6 | mm |
| Housing outline | NA | mm |
| Item | Standard Value | Unit |
|---|---|---|
| Operating voltage | 5 | Vdc |
| Communication Interface | RS485 differential ± 3.3 | Vpp |
| LCD display size | 5 | inch |
| Dot Matrix | 800 × 3(RGB) × 480 | dot |
| Module dimension | 120.7(W) × 75.8(H) × 4.475 | mm |
| Active area | 108(W) × 64.8 (H) | mm |
| Dot pitch | 0.135(W) × 0.135(H) | mm |
| LCD type | TFT, Normally Black, Transmissive | |
| View Direction | 80/80/80/80 | |
| Aspect Ratio | 16:9 | |
| With /Without TP | With Projected Capacitive Touch Panel (PCAP) | |
| Surface | Glare | |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -30 | － | +80 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
| Item | Symbol | Condition | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage For Analog | VCI | － | 4.75 | 5 | 5.5 | V |
| Interface Operation Voltage | IOVCC | － | 3.234 | 3.30 | 3.367 | V |
| Supply LCM current | ICI(mA) | － | 380 | 440 | - | mA |
| Parameter | Symbol | Min. | Typ. | Max. | Unit |
|---|---|---|---|---|---|
| LED current | - | 1.0 | 1.5 | mA | |
| Power Consumption | - | - | 27 | mW | |
| LED voltage | VBL+ | - | - | 18 | V |
| LED Life Time | - | 50,000 | - | Hr |
| Item | Description |
|---|---|
| LCM | WF50FTWAGDNG0# |
| PCBA | 4 layer FR4, 1.6mm |
| Pin | Symbol | Function | Remark |
|---|---|---|---|
| 1 | +5V | Power supply 5V input | Input |
| 2 | GND | Power supply GND input | Input |
| 3 | NC | Connection | - |
| 4 | NC | Connection | - |
| 5 | GND | Power supply GND input | Input |
| 6 | GND | Power supply GND input | Input |
| 7 | NC | Connection | - |
| 8 | NC | Connection | - |
| 9 | VDD_5V | 5V output for USART interface | Output |
| 10 | USART1_RX | USART RX interface | Reserve |
| 11 | USART1_TX | USART TX interface | Reserve |
| 12 | GND | GND for USART interface | Output |
| 13 | VDD_5V | 5V output for USART interface | Output |
| 14 | RS485_B | RS485 DATA- | I/O |
| 15 | RS485_A | RS485 DATA+ | I/O |
| 16 | GND | Power supply GND input | Input |
| Pin | Symbol | Function | Remark |
|---|---|---|---|
| 1 | VMCU | 3.3V power for JTAG interface | Output |
| 2 | JTAG_SWCLK | CLK pin for JTAG interface | Input |
| 3 | GND | GND for JTAG interface | Output |
| 4 | JTAG_SWDIO | Data pin for JTAG interface | I/O |
| 5 | NRST | Reset pin for JTAG interface | Input |
| 6 | GND | GND | Output |
| 7-16 | NC | Connection | - |
Smart Display can be used to display the coordinate, status and data information provided by the connected HOST device. Customers can configure the position coordinates they want to display in normal operation mode.
The Display is designed to be easily connected to a controller network, and to use the register type of Holding Register
The default splash image is shown below.
This product is produced as a generic product. If you require a custom splash image for your application, contact us to discuss.
Smart Display uses the Modbus protocol to get and send the data.
On Config mode, customers can set the coordinates or type of objects; On Display mode, customers can send and get data of objects.
Winstar Smart Display RS-485 series offers an out-of-the-box Modbus development experience that will lower customers' development costs and speed time-to-market expectations.
The Smart Display can use wide-temperature are designed to support control applications in harsh operating conditions, which designed to be connected to a variety of different situation combinations, such as automotive, marine, power generation and oil-and-gas.
The Smart Display can use wide-temperature are designed to support control applications in harsh operating conditions, which designed to be connected to a variety of different situation combinations, such as automotive, marine, power generation and oil-and-gas.
The Smart Display comes with standard UI objects to get customers project off the ground quickly. If customers need custom UI objects support, our engineers are here to help. Send over your contents in PNG/JPG format, we will send over a new set of UI objects within 3~5 working days
The Smart Display is defined as a slave device, which is controlled by master device via RS-485 command to render display content on the display screen and return touch event data with protocol objects.
The screen layout described in this section is intended to demonstrate the settings of screen items that can be used in a industry application situation.
The screen layout described in this section is intended to demonstrate the settings of screen items that can be used in a vehicle automotive situation.
The screen layout described in this section is intended to demonstrate the settings of screen items that can be used in a Medical application situation.
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.