Model No. WG24064J
►Graphic LCD 240x64
►IC: RA6963
►1/64 duty cycle
►+5V power supply only
►Built-in negative voltage
►LED edge backlight : 2.1V, Optional array backlight : 4.2V
►Interface: 8080
| Pin No. | Symbol | Level | Description |
|---|---|---|---|
| 1 | FG | － | Frame ground ( Connected to bezel ) |
| 2 | Vss | － | GND |
| 3 | Vdd | － | Power supply |
| 4 | Vo | － | Power supply for LCD driver |
| 5 | /WR | L | Data write. Write data into RA6963when WR = L |
| 6 | /RD | L | Data read. Read data from RA6963when RD = L |
| 7 | /CE | L | L : Chip enable |
| 8 | C/D | H / L | WR=L , C/D=H : Command Write C/D=L: Data write RD=L , C/D=H : Status Read C/D=L: Data read |
| 9 | Vout | － | Negative voltage output |
| 10 | /RESET | H / L | H : Normal ; L : Initialize RA6963 |
| 11 | DB0 | H / L | Data bus line |
| 12 | DB1 | H / L | Data bus line |
| 13 | DB2 | H / L | Data bus line |
| 14 | DB3 | H / L | Data bus line |
| 15 | DB4 | H / L | Data bus line |
| 16 | DB5 | H / L | Data bus line |
| 17 | DB6 | H / L | Data bus line |
| 18 | DB7 | H / L | Data bus line |
| 19 | FS | H / L | Pins for selection of font; H : 6 * 8 , L : 8 * 8 |
| 20 | NC | － | No connection |
| 21 | A | － | Power supply for B/L + |
| 22 | K | － | Power supply for B/L - |
| Item | Dimension | Unit |
|---|---|---|
| Number of dots | 240 x 64 | － |
| Module dimension | 180.0 x 65.0 x 14.1(Max) | mm |
| View area | 132.6 x 39.0 | mm |
| Active area | 127.15 x 33.87 | mm |
| Dot size | 0.48 x 0.48 | mm |
| Dot pitch | 0.53 x 0.53 | mm |
| Duty | 1/64 | |
| Backlight Type | LED | |
| IC | RA6963 | |
| Interface | 8080 | |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -20 | － | +70 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
| Input Voltage | VIN | -0.3 | － | VDD+0.3 | V |
| Supply Voltage For Logic | VDD-VSS | -0.3 | － | +7.0 | V |
| Item | Symbol | Condition | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage For Logic | VDD-VSS | － | 4.5 | 5.0 | 5.5 | V |
| Supply Voltage For LCD | VDD-V0 | Ta=-20℃ Ta=25℃ Ta=70℃ |
－ 14.1 － |
－ 14.5 － |
－ 14.9 － |
V V V |
| Input High Volt. | VIH | － | 0.8VDD | － | VDD | V |
| Input Low Volt. | VIL | － | 0 | － | 0.15VDD | V |
| Output High Volt. | VOH | － | VDD-0.3 | － | VDD | V |
| Output Low Volt. | VOL | － | 0 | － | 0.3 | V |
| Supply Current | IDD | － | － | 18.5 | － | mA |
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.
