Home Products Graphic LCD WG320240BP2

Display Graphic LCD 320x240, Display LCD 320x240

Model No. WG320240BP2

►Graphic Display LCD 320x240
►IC: S1D13700
►Built-in Negative voltage generator
►1/240 duty cycle
►Touch screen option (analog type)
►Temperature compensation option
►Interface: 6800/8080
►DIP Connection, 20 pins

Description

WG320240BP2 is a STN monochrome graphic LCD 320x240 module display which is having the module dimension of 160x109 mm and AA size of 115.18x86.38 mm, diagonal size 5.7 inch.  This WG320240BP2 display LCD 320x240 module is built in with S1D13700 controller; it communicates via 6800/8080 8-bit parallel interface; 5V power supply and build in negative voltage generator and temperature compensation optional and touch panel optional.  There are three PCB versions for WG320240BX series:
  • WG320240BX: ZIF connector (CN-FPC), 20 pins
  • WG320240BP2: DIP connection, 20 pins
  • WG320240BP3: with touch panel driver, ZIF connector, 26 pins

DRAWING

Display Graphic LCD 320x240, Display LCD 320x240, LCD Display 320x240 - WG320240BP2

SPECIFICATIONS

Interface Pin Function

Pin No. Symbol Level Description
1 VSS 0V Ground
2 VDD 5.0V Power supply for Logic
3 VO (Variable) Driving voltage for LCD
4 ___
WR
H/L 8080 family: Write signal, 6800 family: R/W signal
5 ___
RD
H/L 8080 family: Read signal, 6800 family: Enable clock
6 CS H/L Chip select ,Active L
7 A0 H/L RD=L WR=H ,A0=L :Data Read AO=H :Status read
RD=H WR=L ,A0=L :Data Write AO=H :Command write
8 RES H/L Controller reset signal, Active L
9~16 DB0~DB7 H/L Data bus
17 VEE   Negative voltage output
18 SEL   8088,6800 interface selection (1:68 ,0:80)
19 WAIT   Check busy
20 A   Power supply for B/L +

Mechanical Data

Item Dimension Unit
Number of dots 320 × 240
Module dimension 160.0 × 109.0 × 13.0 (MAX) mm
View area 122.0 × 92.0 mm
Active area 115.18 × 86.38 mm
Dot size 0.33 × 0.33 mm
Dot pitch 0.36 × 0.36 mm
Duty 1/240
Backlight Type LED
IC S1D13700

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 70
Storage Temperature TST -30 80
Input Voltage VIN -0.3 VDD+0.5 V
Output Voltage VOUT -0.3 VDD+0.5 V
Supply Voltage For Logic VDD-VSS 0 6.5 V
Supply Voltage For LCD VDD-V0 0 32 V

Electrical Characteristics

Item Symbol Condition Min Typ Max Unit
Supply Voltage For Logic VDD-VSS 4.5 5 5.5 V
Supply Voltage For LCD VDD-V0 Ta=-20℃
Ta=25℃
Ta=70℃

23
21.8

23.6
26.1
24.2
V
V
V
Input High Volt. VIH 3.5 V
Input Low Volt. VIL 1 V
Output High Volt. VOH VDD-0.4 V
Output Low Volt. VOL 0.4 V
Supply Current IDD VDD=5.0V 90 100 110 mA

Search Keyword: 320x240 lcd, 320 x 240 lcd, lcd 320 x240
go top
close