Model No. WH4004A1
►Character Display LCD 40x4
►Type: Character
►Structure : COB
►Size: 5.6 inch
►40 characters x 4 Lines
►5x8 dots includes cursor
►IC: ST7066
►+5V power supply (Also available for +3V)
►Negative voltage option is only for the +3V power supply
►1/16 duty cycle
►Interface: 6800
►LED can be driven by PIN1, PIN2, PIN17, PIN18 or A and K
| Item | Dimension | Unit |
|---|---|---|
| Number of Characters | 40 characters x 4Lines | - |
| Module dimension | 190.0 x 54.0 x 13.6 (MAX) | mm |
| View area | 147.0 x 29.5 | mm |
| Active area | 140.45 x 23.16 | mm |
| Dot size | 0.50 x 0.55 | mm |
| Dot pitch | 0.57 x 0.62 | mm |
| Character size | 2.78 x 4.89 | mm |
| Character pitch | 3.53 x 6.09 | |
| Duty | 1/16 | |
| Backlight Type | LED | |
| IC | ST7066U | |
| Interface | 68 series | |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -20 | - | +70 | ℃ |
| Storage Temperature | TST | -30 | - | +80 | ℃ |
| Input Voltage | VI | VSS | - | VDD | V |
| Supply Voltage For Logic | VDD-VSS | -0.3 | - | 7 | V |
| Supply Voltage For LCD | VDD-Vo | -0.3 | - | 13 | V |
| Item | Symbol | Condition | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage For Logic | VDD-VSS | - | 4.5 | 5.0 | 5.5 | V |
| Supply Voltage For LCD | VDD-V0 | Ta=-20℃ Ta=25℃ Ta=70℃ |
－ 4.2 3.8 |
－ 4.35 － |
5.7 4.5 － |
V V V |
| Input High Volt. | VIH | - | 0.7 VDD | - | VDD | V |
| Input Low Volt. | VIL | - | VSS | - | 0.6 | V |
| Output High Volt. | VOH | - | 3.9 | - | VDD | V |
| Output Low Volt. | VOL | - | 0 | - | 0.4 | V |
| Supply Current | IDD | VDD=5.0V | 1.8 | 3.5 | 7.0 | mA |
| Pin No. | Symbol | Level | Description |
|---|---|---|---|
| 1 | DB7 | H/L | Data bus line |
| 2 | DB6 | H/L | Data bus line |
| 3 | DB5 | H/L | Data bus line |
| 4 | DB4 | H/L | Data bus line |
| 5 | DB3 | H/L | Data bus line |
| 6 | DB2 | H/L | Data bus line |
| 7 | DB1 | H/L | Data bus line |
| 8 | DB0 | H/L | Data bus line |
| 9 | E1 | H,H→L | Chip enable signal |
| 10 | R/W | H/L | H: Read(Module→MPU) L: Write(MPU→Module) |
| 11 | RS | H/L | H: DATA, L: Instruction code |
| 12 | VO | (Variable) | Operating voltage for LCD |
| 13 | VSS | 0V | Ground |
| 14 | VDD | 5.0V | Supply Voltage for logic |
| 15 | E2 | H,H→L | Chip enable signal |
| 16 | NC | - | NC |
| 17 | A | - | Power Supply for LED+ |
| 18 | K | - | Power Supply for LED- |
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.
