ホーム 製品 有機ELディスプレイ タッチパネル 有機 EL WEN025664B-CTP

3.12 インチ 256x64 COF タッチパネル有機ELモジュール +PCB +鉄フレーム

型番 WEN025664B-CTP

►タイプ: グラフィック有機ELモジュール
►結構: COF+FR+PCB
►サイズ: 3.12インチ
►256×64 ドットマトリックス
►IC:SSD1322
►3V電源電圧
►1/64 duty cycle
►インターフェース: 6800, 8080, SPI
►静電容量式タッチパネル(CTP)
►検出ポイント: 1
►発光色: 白色 / 黄色 / 空色 / 緑色
►グレースケール機能をサポートする

製品情報

WEN025664B-CTPモジュールはCOF構造の グラフィック有機EL ディスプレイで、対角寸法は3.12 インチで、解像度は256x64です。 SSD1322 COF ICを内蔵し、6800/8080 8ビットのパラレルと 4線式SPIインターフェースをサポート致します。グレースケールは4ビットで、ロジックの電源電圧は3Vで、50%チェックボード電流での表示は150mA @3.0V VDD (標準値)で、駆動デューティは1/64です。このモジュールは 静電容量式タッチパネルを搭載しており、FT6336U ICを内蔵し、I2Cインターフェースをサポート致します。 1本指で検出ポイントをサポートし、表面ガラスが通常のグレアタイプです。 WEN0256464B-CTP モジュールはPCB基板を搭載しており、 お得意先の設備と製品にワイヤーで接続することができます。そして、PCB基板にVCC回路が設けられており、固定用の取り付け穴も付きのため 、お得意先の開発及び作業の効率を向上させます。

この有機ELディスプレイはスマートホームアプリケーション、医療機器 、産業用制御システム などに適しております。操作温度範囲は-20℃ ~ +70℃で、保存温度範囲は -30℃ ~ +80℃です。

また、同じサイズのOLEDパネルにはさまざまな代替案が用意されています:
  • WEX025664Bシリーズ、メタルフレーム、PCB、タッチパネルなし。
  • WEX025664B-CTPシリーズ、メタルフレームなし、PCBなし、静電容量タッチパネル付き。
  • WEN025664Bシリーズ、メタルフレーム、PCBあり。

外形図

3.12 inch 256x64 COF Touch OLED Display with PCB +Frame - WEN025664B-CTP
 

Data source ref: WEN025664BWPP3D00000

製品仕様

ピン功能定義

Pin Number 記号 I/O 説明
1 VSS P Ground.
2 VDD P Power Supply for Core Logic Circuit
Power supply pin for core logic operation. A capacitor is required to connect between this pin and VSS
3 N.C. P Reserved Pin
The N.C. pin between function pins are reserved for compatible and flexible design.
4 D/C# I Data/Command Control
This pin is Data/Command control pin connecting to the MCU.
When the pin is pulled HIGH, the content at D[7:0] will be interpreted as data.
When the pin is pulled LOW, the content at D[7:0] will be interpreted as command.
5 R/W#
(WR#)
I Read/Write Select or Write
This pin is MCU interface input. When interfacing to a 68XX-series microprocessor, this pin will be used as Read/Write (R/W#) selection input. Pull this pin to “High” for read mode and pull it to “Low” for write mode.
When 80XX interface mode is selected, this pin will be the Write (WR#) input. Data write operation is initiated when this pin is pulled low and the CS# is pulled low.
When serial mode is selected, this pin must be connected to VSS.
6 E/RD# I Read/Write Enable or Read
This pin is MCU interface input.
When interfacing to a 68XX-series microprocessor, this pin will be used as the Enable (E) signal. Read/write operation is initiated when this pin is pulled high and the CS# is pulled low.
When connecting to an 80XX-microprocessor, this pin receives the Read (RD#) signal. Data read operation is initiated when this pin is pulled low and CS# is pulled low.
When serial mode is selected, this pin must be connected to VSS.
7~14 DB0 I/O Host Data Input/Output Bus
These pins are 8-bit bi-directional data bus to be connected to the microprocessor’s data bus.
When serial mode is selected, D1 will be the serial data input SDIN and D0 will be the serial clock input SCLK.
DB1
DB2
DB3
DB4
DB5
DB6
DB7
15 NC P Reserved Pin
The N.C. pin between function pins are reserved for compatible and flexible design.
16 RES# I This pin is reset signal input.
When the pin is pulled LOW, initialization of the chip is executed.
Keep this pin pull HIGH during normal operation.
17 CS# I Data/Command Control
This pin is the chip select input connecting to the MCU. The chip is enabled for MCU communication only when CS# is pulled LOW.
18 NC P Reserved Pin
The N.C. pin between function pins are reserved for compatible and flexible design.
19 BS1 I Communicating Protocol Select
These pins are MCU interface selection input. See the following table:
BS[1:0] Bus Interface electioin
00 4 line SPI
01 3 line SPI
10 8-bit 8080 parallel
11 8-bit 6800 parallel
Note
(1) 0 is connected to VSS
(2) 1 is connected to VDD
20 BS0
21 TP_SCK I I2C clock input
22 TP_SDA I I2C data input and output
23 TP_INT I External interrupt to the host
24 TP_RST I External Reset, Low is active

規格説明

項目 仕様 単位
ドットマトリックス 256 x 64 Dots
モジュールサイズ 89.2 × 44.0 × 7.98 mm
アクティブエリア 76.78 × 19.18 mm
ドットサイズ 0.278 × 0.278 mm
ドットピッチ 0.3 × 0.3 mm
表示モード パッシブマトリクス
発光色 モノクロ
駆動方法 1/64 Duty
グレースケール 4 bits
OLED IC SSD1322 (COF)
OLED インターフェイス 6800, 8080, SPI
表示サイズ(対角線) 3.12 インチ
CTP IC FT6336U
検出ポイント 1
CTP インターフェイス I2C
表面処理 グレア

絶対最大定格

パラメーター 記号 最小値 最大値 単位
顯示電源電圧 VDD -0.3 4 V
操作温度 TOP -20 +70 °C
保存温度 TSTG -30 +80 °C

電気特性

DC 電気特性

項目 記号 条件 最小値 典型値 最大値 単位
ロジック電源電圧 VDD 2.8 3.0 3.3 V
高レベル入力 VIH 0.8×VDD VDD V
低レベル入力 VIL 0 0.2×VDD V
高レベル出力 VOH 0.9×VDD VDD V
低レベル出力 VOL 0 0.1×VDD V
50% Check Board operating Current IDD VDD =3V 150 300 mA
 

Search keyword: 256x64 oled, oled 256x64, 3.12 oled, 3.12" oled, 3.12 インチoled, oled 3.12"

go top
close