OLED Grafico 3.12" con Touch Capacitivo - 256x64 Pixel
Modello numero WEN025664B-CTP
►Tipo : grafico
►Struttura : COF+FR+PCB
►Dimensione : 3.12 pollici
►256×64 a matrice di punti
►IC:SSD1322
►Alimentatore 3V
►1/64 duty cycle
►Interfaccia: 6800, 8080, SPI
►Touch Screen : con pannello touch capacitivo (CTP)
►Punti di tocco : 1 Dito
►Colore display: Bianco / Giallo / Cielo blu / Verde
►Support Grayscale
Descrizione
Il modello WEN025664B-CTP è un OLED grafico COF con touch capacitivo, con una dimensione diagonale di 3.12 pollici e una risoluzione di 256x64 pixel. Questo modulo OLED è integrato con l'IC SSD1322 e supporta interfacce SPI a 8 bit 6800/8080 e a 3/4 linee. Supporta anche una scala di grigi a 4 bit, con una tensione di alimentazione logica di 3V. La corrente del display al 50% della scheda di controllo è di 150mA @3.0V VDD (valore tipico), con un ciclo di guida di 1/64. Il modello include un pannello touch capacitivo con l'IC FT6336U che supporta un'interfaccia I2C, un punto di rilevamento per il CTP e un vetro normale a superficie opaca.
Il modulo ha una PCB integrata, consentendo ai clienti di utilizzare connessioni via cavo senza la necessità di ulteriori sviluppi di PCB per le loro applicazioni. Inoltre, il circuito VCC integrato sulla PCB semplifica l'uso da parte del cliente. Questa scheda PCB, dotata di quattro fori di montaggio, fornisce un metodo facile per i clienti di fissare i moduli nelle loro applicazioni. Questo modulo OLED è adatto per applicazioni smart home, dispositivi medici, controllo industriale, ecc.
Il modello WEN025664B-CTP può operare a temperature comprese tra -20℃ e +70℃, con temperature di stoccaggio che vanno da -30℃ a +80℃. Il modulo OLED presenta un elevato rapporto di contrasto di 10.000:1, risultando in una qualità dell'immagine migliorata, dettagli più nitidi e una migliore leggibilità, soprattutto in ambienti a bassa luminosità.
Inoltre, la linea di prodotti degli stessi pannelli OLED offre diverse alternative:- Serie WEX025664B senza cornice metallica, PCB e touch screen.
- Serie WEX025664B-CTP senza cornice metallica, PCB e con touch screen CTP.
- Serie WEN025664B con cornice metallica e PCB.
DISEGNO
Data source ref: WEN025664BWPP3D00000
SPECIFICHE TECNICHE
Funzione dei Pin di Interfaccia
Pin Number | Simbolo | I/O | Funzione | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | VSS | P | Ground. | ||||||||||
2 | VDD | P | Power Supply for Core Logic Circuit Power supply pin for core logic operation. A capacitor is required to connect between this pin and VSS |
||||||||||
3 | N.C. | P | Reserved Pin The N.C. pin between function pins are reserved for compatible and flexible design. |
||||||||||
4 | D/C# | I | Data/Command Control This pin is Data/Command control pin connecting to the MCU. When the pin is pulled HIGH, the content at D[7:0] will be interpreted as data. When the pin is pulled LOW, the content at D[7:0] will be interpreted as command. |
||||||||||
5 | R/W# (WR#) |
I | Read/Write Select or Write This pin is MCU interface input. When interfacing to a 68XX-series microprocessor, this pin will be used as Read/Write (R/W#) selection input. Pull this pin to “High” for read mode and pull it to “Low” for write mode. When 80XX interface mode is selected, this pin will be the Write (WR#) input. Data write operation is initiated when this pin is pulled low and the CS# is pulled low. When serial mode is selected, this pin must be connected to VSS. |
||||||||||
6 | E/RD# | I | Read/Write Enable or Read This pin is MCU interface input. When interfacing to a 68XX-series microprocessor, this pin will be used as the Enable (E) signal. Read/write operation is initiated when this pin is pulled high and the CS# is pulled low. When connecting to an 80XX-microprocessor, this pin receives the Read (RD#) signal. Data read operation is initiated when this pin is pulled low and CS# is pulled low. When serial mode is selected, this pin must be connected to VSS. |
||||||||||
7~14 | DB0 | I/O | Host Data Input/Output Bus These pins are 8-bit bi-directional data bus to be connected to the microprocessor’s data bus. When serial mode is selected, D1 will be the serial data input SDIN and D0 will be the serial clock input SCLK. |
||||||||||
DB1 | |||||||||||||
DB2 | |||||||||||||
DB3 | |||||||||||||
DB4 | |||||||||||||
DB5 | |||||||||||||
DB6 | |||||||||||||
DB7 | |||||||||||||
15 | NC | P | Reserved Pin The N.C. pin between function pins are reserved for compatible and flexible design. |
||||||||||
16 | RES# | I | This pin is reset signal input. When the pin is pulled LOW, initialization of the chip is executed. Keep this pin pull HIGH during normal operation. |
||||||||||
17 | CS# | I | Data/Command Control This pin is the chip select input connecting to the MCU. The chip is enabled for MCU communication only when CS# is pulled LOW. |
||||||||||
18 | NC | P | Reserved Pin The N.C. pin between function pins are reserved for compatible and flexible design. |
||||||||||
19 | BS1 | I | Communicating Protocol Select These pins are MCU interface selection input. See the following table:
(1) 0 is connected to VSS (2) 1 is connected to VDD |
||||||||||
20 | BS0 | ||||||||||||
21 | TP_SCK | I | I2C clock input | ||||||||||
22 | TP_SDA | I | I2C data input and output | ||||||||||
23 | TP_INT | I | External interrupt to the host | ||||||||||
24 | TP_RST | I | External Reset, Low is active |
Dati meccanici
Articolo | Dimensioni | Unità |
---|---|---|
A matrice di punti | 256 x 64 punti | - |
Dimensione del modulo | 89.2 × 44.0 × 7.98 | mm |
Area attiva | 76.78 × 19.18 | mm |
Dimensioni del Dot | 0.278 × 0.278 | mm |
Passo del Dot | 0.3 × 0.3 | mm |
Modalità display | Matrice passiva | |
Colore display | monocromatici | |
Drive Duty | 1/64 Duty | |
Gray Scale | 4 bits | |
OLED IC | SSD1322 (COF) | |
OLED Interfaccia | 6800, 8080, SPI | |
Dimensione (Diagonale) | 3.12 pollici | |
CTP IC | FT6336U | |
Punti di tocco | 1 | |
CTP Interfaccia | I2C | |
Superficie | Bagliore (Glare) |
Valori massimi assoluti
Parameter | Simbolo | Valore Min | Valore massimo | Unità |
---|---|---|---|---|
Supply Voltage for Display | VDD | -0.3 | 4 | V |
Temperatura di lavoro | TOP | -20 | +70 | °C |
Temperatura di stock | TSTG | -30 | +80 | °C |
Caratteristiche elettriche
DC Caratteristiche elettriche
Articolo | Simbolo | Condizione | Valore Min | Valore tipico | Valore massimo | Unità |
---|---|---|---|---|---|---|
Supply Voltage for Logic | VDD | - | 2.8 | 3.0 | 3.3 | V |
High Level Input | VIH | - | 0.8×VDD | - | VDD | V |
Low Level Input | VIL | - | 0 | - | 0.2×VDD | V |
High Level Output | VOH | - | 0.9×VDD | - | VDD | V |
Low Level Output | VOL | - | 0 | - | 0.1×VDD | V |
50% Check Board operating Current | IDD | VDD =3V | - | 150 | 300 | mA |
Search keyword: 256x64 oled, oled 256x64, 3.12 oled, 3.12" oled, 3.12 pollici oled, oled 3.12, oled 3.12"