Pantalla COF OLED de 3.12 "y 128x64 con panel táctil +PCB +Agujero del bastidor
Modelo Nº WEN025664B-CTP
►Tipo : Gráfico
►Estructura : COF+FR+PCB
►Tamaño : 3.12"
►Matriz de puntos 256×64
►IC:SSD1322
►Fuente de alimentación de 3V
►1/64 duty cycle
►Interfaz: 6800, 8080, SPI
►Pantalla táctil : Con panel táctil capacitivo (CTP)
►Puntos táctiles : 1 Puntos
►Color de la pantalla: Blanco / Amarillo / Azul cielo / Verde
►Compatibilidad con escala de grises
Descripción
El modelo WEN025664B-CTP es un OLED gráfico COF con pantalla táctil capacitiva, con un tamaño diagonal de 3.12 pulgadas y una resolución de 256x64 puntos. Este módulo OLED incorpora el circuito integrado SSD1322 y es compatible con interfaces de 8 bits 6800/8080 y SPI de 3/4 líneas. También es compatible con 4 bits de escala de grises, con un voltaje lógico de alimentación de 3V. La corriente de la pantalla al 50% en la placa de verificación es de 150mA a 3.0V VDD (valor típico), con un ciclo de trabajo de conducción de 1/64. El modelo incluye un panel táctil capacitivo con el circuito integrado FT6336U que admite una interfaz I2C, un punto de detección para CTP y un vidrio de superficie normal con brillo.
El módulo tiene una PCB incorporada, lo que permite a los clientes utilizar conexiones por cable sin necesidad de desarrollo adicional de PCB para sus aplicaciones. Además, el circuito VCC integrado en la PCB simplifica el uso por parte del cliente. Esta placa PCB, equipada con cuatro orificios de montaje, proporciona un método fácil para que los clientes aseguren los módulos en sus aplicaciones. Este módulo OLED es adecuado para aplicaciones de hogar inteligente, dispositivos médicos, control industrial, etc.
El modelo WEN025664B-CTP puede funcionar a temperaturas que van desde -20°C hasta +70°C, con temperaturas de almacenamiento que van desde -30°C hasta +80°C. El módulo OLED cuenta con una alta relación de contraste de 10,000:1, lo que se traduce en una mejor calidad de imagen, detalles más nítidos y una mayor legibilidad, especialmente en entornos con poca luz.
Además, la línea de productos de los mismos paneles OLED ofrece diversas alternativas:- Serie WEX025664B sin marco metálico, PCB y pantalla táctil.
- Serie WEX025664B-CTP sin marco metálico, PCB y con pantalla táctil CTP.
- Serie WEN025664B con marco metálico y PCB.
DIBUJO
Data source ref: WEN025664BWPP3D00000
ESPECIFICACIONES
Función interfaz Pin
Pin Number | Símbolo | I/O | Función | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | VSS | P | Ground. | ||||||||||
2 | VDD | P | Power Supply for Core Logic Circuit Power supply pin for core logic operation. A capacitor is required to connect between this pin and VSS |
||||||||||
3 | N.C. | P | Reserved Pin The N.C. pin between function pins are reserved for compatible and flexible design. |
||||||||||
4 | D/C# | I | Data/Command Control This pin is Data/Command control pin connecting to the MCU. When the pin is pulled HIGH, the content at D[7:0] will be interpreted as data. When the pin is pulled LOW, the content at D[7:0] will be interpreted as command. |
||||||||||
5 | R/W# (WR#) |
I | Read/Write Select or Write This pin is MCU interface input. When interfacing to a 68XX-series microprocessor, this pin will be used as Read/Write (R/W#) selection input. Pull this pin to “High” for read mode and pull it to “Low” for write mode. When 80XX interface mode is selected, this pin will be the Write (WR#) input. Data write operation is initiated when this pin is pulled low and the CS# is pulled low. When serial mode is selected, this pin must be connected to VSS. |
||||||||||
6 | E/RD# | I | Read/Write Enable or Read This pin is MCU interface input. When interfacing to a 68XX-series microprocessor, this pin will be used as the Enable (E) signal. Read/write operation is initiated when this pin is pulled high and the CS# is pulled low. When connecting to an 80XX-microprocessor, this pin receives the Read (RD#) signal. Data read operation is initiated when this pin is pulled low and CS# is pulled low. When serial mode is selected, this pin must be connected to VSS. |
||||||||||
7~14 | DB0 | I/O | Host Data Input/Output Bus These pins are 8-bit bi-directional data bus to be connected to the microprocessor’s data bus. When serial mode is selected, D1 will be the serial data input SDIN and D0 will be the serial clock input SCLK. |
||||||||||
DB1 | |||||||||||||
DB2 | |||||||||||||
DB3 | |||||||||||||
DB4 | |||||||||||||
DB5 | |||||||||||||
DB6 | |||||||||||||
DB7 | |||||||||||||
15 | NC | P | Reserved Pin The N.C. pin between function pins are reserved for compatible and flexible design. |
||||||||||
16 | RES# | I | This pin is reset signal input. When the pin is pulled LOW, initialization of the chip is executed. Keep this pin pull HIGH during normal operation. |
||||||||||
17 | CS# | I | Data/Command Control This pin is the chip select input connecting to the MCU. The chip is enabled for MCU communication only when CS# is pulled LOW. |
||||||||||
18 | NC | P | Reserved Pin The N.C. pin between function pins are reserved for compatible and flexible design. |
||||||||||
19 | BS1 | I | Communicating Protocol Select These pins are MCU interface selection input. See the following table:
(1) 0 is connected to VSS (2) 1 is connected to VDD |
||||||||||
20 | BS0 | ||||||||||||
21 | TP_SCK | I | I2C clock input | ||||||||||
22 | TP_SDA | I | I2C data input and output | ||||||||||
23 | TP_INT | I | External interrupt to the host | ||||||||||
24 | TP_RST | I | External Reset, Low is active |
Datos mecánicos
Elemento | Valor estándar | Unidad |
---|---|---|
Matriz de puntos | 256 x 64 puntos | - |
Dimensión del módulo | 89.2 × 44.0 × 7.98 | mm |
zona activa | 76.78 × 19.18 | mm |
Tamaño del punto | 0.278 × 0.278 | mm |
Distancia entre puntos | 0.3 × 0.3 | mm |
Modo de visualización | Matriz Pasiva | |
Color de la pantalla | Monocromos | |
Drive Duty | 1/64 Duty | |
Escala de grises | 4 bits | |
OLED IC | SSD1322 (COF) | |
OLED Interfaz | 6800, 8080, SPI | |
Tamaño (Diagonal) | 3.12 pulgada | |
CTP IC | FT6336U | |
Puntos táctiles | 1 | |
CTP Interfaz | I2C | |
Superficie | Deslumbramiento |
Valores nominales máximos absolutos
Parameter | Símbolo | Valor mín. | Valor máx. | Unidad |
---|---|---|---|---|
Supply Voltage for Display | VDD | -0.3 | 4 | V |
Temperatura de funcionamiento | TOP | -20 | +70 | °C |
Temperatura de almacenamiento | TSTG | -30 | +80 | °C |
Características electrónicas
DC Características electrónicas
Elemento | Símbolo | Condición | Valor mín. | Valor típico | Valor máx. | Unidad |
---|---|---|---|---|---|---|
Supply Voltage for Logic | VDD | - | 2.8 | 3.0 | 3.3 | V |
High Level Input | VIH | - | 0.8×VDD | - | VDD | V |
Low Level Input | VIL | - | 0 | - | 0.2×VDD | V |
High Level Output | VOH | - | 0.9×VDD | - | VDD | V |
Low Level Output | VOL | - | 0 | - | 0.1×VDD | V |
50% Check Board operating Current | IDD | VDD =3V | - | 150 | 300 | mA |
Search keyword: 256x64 oled, oled 256x64, 3.12 oled, 3.12" oled, 3.12 pulgada oled, oled 3.12"