Pantalla TFT 5. 7 pulgada
Modelo Nº WF57VTIACDNN0
►Tamaño : 5.7 pulgada
►Resolución : 320 x 240 puntos
►Dirección de la vista : 12H
►Interfaz : RGB
►Driver IC:HX8218+HX8615
►Placa de control : No
►Brillo (cd/m²) : 500
►Agujero del bastidor : Yes
►Pantalla táctil : Sin panel táctil
►O-Film : Opcional
Descripción
WF57VTIACDNN0 es un TFT LCD estándar de 5.7 pulgadas que presenta una resolución de 320 x 240 puntos y una luminosidad de 500 cd/m2. Equipado con un circuito integrado de controlador HX8218+HX8615 que soporta interfaces RGB de 24 bits, este módulo TFT opera con una fuente de alimentación de voltaje de 3.3V (valor típico). Sus dimensiones del módulo miden 160.0 mm de ancho y 109.0 mm de alto, con un área activa de 115.20 × 86.40 mm.
WF57VTIACDNN0 cuenta con una dirección de visualización a las 12 en punto, una inversión de escala de grises a las 6 en punto y una relación de aspecto de 4:3. La temperatura de funcionamiento varía desde -20°C hasta +70°C, mientras que la temperatura de almacenamiento abarca desde -30°C hasta +80°C.
Este tipo de pantalla encuentra una integración ideal en diversos dispositivos médicos como sistemas de monitoreo de pacientes, equipos de ultrasonido y equipos de imágenes médicas, donde un feedback visual claro y preciso es esencial para un diagnóstico y tratamiento precisos.
En sistemas de automatización y control industrial, este display TFT es invaluable para la monitorización y control de maquinaria, equipos y procesos. Proporciona a los operadores datos en tiempo real y feedback visual, garantizando el funcionamiento eficiente y el mantenimiento de las instalaciones industriales.
DIBUJO
ESPECIFICACIONES
Función interfaz Pin
Pin | Símbolo | Función |
---|---|---|
1 | IF1 | Input data format control |
2 | IF2 | Input data format control |
3 | POL | Polarity Signal connect to VCOM driving circuit. |
4 | RESET | Hardware reset |
5 | SPENA | Chip select |
6 | SPCL | Serial Clock |
7 | SPDA | Serial Data |
8 | B0 | Blue Data bit |
9 | B1 | Blue Data bit |
10 | B2 | Blue Data bit |
11 | B3 | Blue Data bit |
12 | B4 | Blue Data bit |
13 | B5 | Blue Data bit |
14 | B6 | Blue Data bit |
15 | B7 | Blue Data bit |
16 | G0 | Green Data bit |
17 | G1 | Green Data bit |
18 | G2 | Green Data bit |
19 | G3 | Green Data bit |
20 | G4 | Green Data bit |
21 | G5 | Green Data bit |
22 | G6 | Green Data bit |
23 | G7 | Green Data bit |
24 | R0 | Red Data bit |
25 | R1 | Red Data bit |
26 | R2 | Red Data bit |
27 | R3 | Red Data bit |
28 | R4 | Red Data bit |
29 | R5 | Red Data bit |
30 | R6 | Red Data bit |
31 | R7 | Red Data bit |
32 | Hsync | Horizontal synchronous signal |
33 | Vsync | Vertical synchronous signal |
34 | Data CLK | Dot data clock |
35 | AVDD(analog) | Analog power: 4.5V~5.5V |
36 | AVDD(analog) | Analog power: 4.5V~5.5V |
37 | VCC(Digital) | Digital power: 3V~3.6V |
38 | VCC(Digital) | Digital power: 3V~3.6V |
39 | NPC | NTSC/PAL mode Auto detection result H:NTSC/L:PAL |
40 | VGL | Gate off power |
41 | VGL | Gate off power |
42 | U/D | Up/down selection |
43 | VGH | Gate on power |
44 | L/R | Shift direction of device internal shift register control. |
45 | GND | System ground pin of the IC. Connect to system ground. |
46 | VCOM | VCOM driving input |
47 | VCOM | VCOM driving input |
48 | ENB | Signal to settle the horizontal display position |
49 | GND | System ground pin of the IC. Connect to system ground. |
50 | GND | System ground pin of the IC. Connect to system ground. |
Especificaciones generales
Elemento | Dimensión | Unidad |
---|---|---|
Tamaño | 5.7 | pulgada |
Matriz de puntos | 320 × RGB × 240 (TFT) | dots |
Dimensión del módulo | 160.0(W) × 109.0(H) × 8.3(D) | mm |
zona activa | 115.20 × 86.40 | mm |
Distancia entre puntos | 0.12 × 0.36 | mm |
Tipo de LCD | TFT, Blanco, Transmisivo | |
Dirección de la vista | 12 o'clock | |
Dirección de inversión de escala de grises | 6 o'clock | |
Interfaz TFT | 24-bit RGB | |
CI de unidad TFT | HX8218+HX8615 o equivalente | |
Relación de aspecto | 4:3 | |
Tipo de retroiluminación | LED, Blanco | |
Con o sin panel táctil | Sin panel táctil | |
Superficie | Deslumbramiento |
Valores nominales máximos absolutos
Elemento | Símbolo | Valor mín. | Valor típico | Valor máx. | Unidad |
---|---|---|---|---|---|
Temperatura de funcionamiento | TOP | -20 | - | +70 | ℃ |
Temperatura de almacenamiento | TST | -30 | - | +80 | ℃ |
Características electrónicas
1. Operating conditionsElemento | Símbolo | Valor mín. | Valor típico | Valor máx | Unidad |
---|---|---|---|---|---|
Supply Voltage For LCM | VCC | 3.2 | 3.3 | 3.4 | V |
Supply Current For LCM | ICC | - | 30 | 45 | mA |
Input High Volt. | VIH | 0.7 VCC | - | VCC | V |
Input Low Volt. | VIL | 0 | - | 0.3 VCC | V |
LCD Driving Supply Voltage |
VGH | 15 | 16 | 17 | V |
VGL | -6 | -5 | -4 | V | |
VCOMH | - | 4.5 | - | V | |
VCOML | - | -0.5 | - | V | |
AVDD | 4.5 | 5.0 | 5.5 | V |
2. LED driving conditions:
Parámetro | Símbolo | Valor mín | Valor típico | Valor típico | Unidad |
---|---|---|---|---|---|
corriente LED | - | - | 140 | - | mA |
El consumo de energía | - | 1260 | - | 1470 | mW |
Voltaje LED | VBL+ | 9.0 | - | 10.5 | V |
Tiempo de vida del LED | - | - | 50,000 | - | Hr |