Pantalla OLED Gráfico SSD1307 1,71 pulgada
Modelo Nº WEO012832P
►Tipo : Gráfico
►Estructura : COG
►Tamaño : 1,71 pulgada
►Matriz de puntos 128 x 32
►IC:CH1115
►Fuente de alimentación de 3V
►1/32 duty
►Interfaz : SPI, I2C
►Color de la pantalla: Blanco / Amarillo
Descripción
Se trata WEO012832P de una pantalla OLED COG que está hecha de 128x32 puntos, con un tamaño diagonal de 1,71 pulgadas. Este módulo tiene un tamaño de 50,50x15,75 mm y un tamaño de área activa de 42,22x10,54 mm. Este módulo está integrado con CH1115 IC; es compatible con la interfaz SPI y I2C.
El voltaje de suministro para la lógica es de 1,65 V a 3,3 V, con un valor típico de 3,0 V. El voltaje de suministro para pantalla es de 12 V, con 1/32 de servicio de impulsión. Esta serie de módulo puede funcionar a temperaturas de -40 ℃ a +80 ℃ y su temperatura de almacenamiento oscila entre -40 ℃ y +85 ℃.
DIBUJO
Data source ref: WEO012832PWAP3N00000
ESPECIFICACIONES
Función interfaz Pin
No. | Símbolo | Función | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | ESD_GND | ESD Ground pin | ||||||||||||
2 | VPP | OLED panel power supply. | ||||||||||||
3 | VSS | This is a ground pin. | ||||||||||||
4 | VSS | This is a ground pin. | ||||||||||||
5 | VDD | Power Supply for Logic | ||||||||||||
6 | __ CS |
This pad is the chip select input. When /CS = “L”, then the chip select becomes active, and data/command I/O is enabled. | ||||||||||||
7 | ___ RES |
This is a reset signal input pad. When /RES is set to “L”, the settings are initialized. The reset operation is performed by the /RES signal level. | ||||||||||||
8 | A0 | This is the Data/Command control pad that determines whether the data bits are data or a command. In I2C interface, this pad serves as SA0 to distinguish the different address of OLED driver. |
||||||||||||
9 | SCL | The serial clock input pad | ||||||||||||
10 | SI/SDA | The serial data input pad | ||||||||||||
11 | NC | Dummy Pin | ||||||||||||
12 | IREF | This is a segment current reference pad. A resistor should be connected between this pad and VSS. Set the current at 18.75μA. | ||||||||||||
13 | VCOMH | The pin is for COM signal deselected voltage level. A capacitor should be connected between this pin and VSS. |
||||||||||||
14 | VPP | OLED panel power supply. | ||||||||||||
15 | IM0 | These are the MPU interface mode select pads.
|
||||||||||||
16 | IM1 | |||||||||||||
17 | VSS | This is a ground pin. | ||||||||||||
18 | ESD_GND | ESD Ground pin |
Datos mecánicos
Elemento | Dimensión | Unidad |
---|---|---|
Matriz de puntos | 128 × 32 | Dots |
Dimensión del módulo | 50.50 × 15.75 × 2.01 | mm |
zona activa | 42.22 × 10.54 | mm |
Tamaño del punto | 0.308 × 0.308 | mm |
Distancia entre puntos | 0.33 × 0.33 | mm |
Modo de visualización | Matriz pasiva | |
Color de la pantalla | Monocromos | |
Drive Duty | 1/32 Duty | |
IC | CH1115 | |
Interfaz | SPI, I2C | |
Tamaño | 1.71 pulgada |
Valores nominales máximos absolutos
Parameter | Símbolo | Valor mín. | Valor máx. | Unidad |
---|---|---|---|---|
Supply Voltage for Logic | VDD | -0.3 | 3.6 | V |
Supply Voltage for Display | VPP | -0.3 | 14.5 | V |
Operating Temperature | TOP | -40 | +80 | °C |
Storage Temperature | TSTG | -40 | +85 | °C |
Características electrónicas
Elemento | Símbolo | Condición | Valor mín. | Valor típico | Valor máx. | Unidad |
---|---|---|---|---|---|---|
Supply Voltage for Logic | VDD | - | 1.65 | 3.0 | 3.3 | V |
Supply Voltage for Display | VPP | - | 6.4 | 12.0 | 12.5 | V |
High Level Input | VIH | - | 0.8×VDD | - | VDD | V |
Low Level Input | VIL | - | VSS | - | 0.2×VDD | V |
High Level Output | VOH | - | 0.8×VDD | - | VDD | V |
Low Level Output | VOL | - | VSS | - | 0.2×VDD | V |
Display 50% Pixel on | IPP | VPP=12V | - | 5 | 10 | mA |
Search keyword: 128x32 oled, oled 128x32, 1.71 oled, 1.71" oled, 1.71 pulgada oled, oled 1.71, oled 1.71"