OLED Gráfico SSD1307 1,71 polegadas
Model No. WEO012832P
►Tipo: Gráfico
►Estrutura: COG
►Tamanho: 1,71 polegadas
►Matriz de pontos 128 x 32
►IC:CH1115
►Alimentação 3V
►1/32 duty
►Interface: SPI, I2C
►Display Color: Branco / Amarelo
Descrição
Este WEO012832P é um display COG OLED fabricado com 128x32 pontos e tamanho diagonal de 1,71 polegadas. Este módulo tem dimensão de módulo de 50,50x15,75 mm e área ativa de 42,22x10,54 mm. Este módulo está integrado com CH1115 IC; ele suporta interface de I2C e SPI.
A tensão de alimentação para a lógica é de 1,65V a 3,3V, valor típico é 3V, tensão de alimentação para o display é de 12V, 1/32 para o acionamento. Esta série de módulos pode operar a temperaturas de -40℃ a +80℃; suas temperaturas de armazenamento variam de -40℃ a +85℃.
DRAWING
Data source ref: WEO012832PWAP3N00000
SPECIFICATIONS
Função do pino de interface
No. | Símbolo | Função | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | ESD_GND | ESD Ground pin | ||||||||||||
2 | VPP | OLED panel power supply. | ||||||||||||
3 | VSS | This is a ground pin. | ||||||||||||
4 | VSS | This is a ground pin. | ||||||||||||
5 | VDD | Power Supply for Logic | ||||||||||||
6 | __ CS |
This pad is the chip select input. When /CS = “L”, then the chip select becomes active, and data/command I/O is enabled. | ||||||||||||
7 | ___ RES |
This is a reset signal input pad. When /RES is set to “L”, the settings are initialized. The reset operation is performed by the /RES signal level. | ||||||||||||
8 | A0 | This is the Data/Command control pad that determines whether the data bits are data or a command. In I2C interface, this pad serves as SA0 to distinguish the different address of OLED driver. |
||||||||||||
9 | SCL | The serial clock input pad | ||||||||||||
10 | SI/SDA | The serial data input pad | ||||||||||||
11 | NC | Dummy Pin | ||||||||||||
12 | IREF | This is a segment current reference pad. A resistor should be connected between this pad and VSS. Set the current at 18.75μA. | ||||||||||||
13 | VCOMH | The pin is for COM signal deselected voltage level. A capacitor should be connected between this pin and VSS. |
||||||||||||
14 | VPP | OLED panel power supply. | ||||||||||||
15 | IM0 | These are the MPU interface mode select pads.
|
||||||||||||
16 | IM1 | |||||||||||||
17 | VSS | This is a ground pin. | ||||||||||||
18 | ESD_GND | ESD Ground pin |
Dados Mecânicos
Item | Dimensão | Unidade |
---|---|---|
Matriz de pontos | 128 × 32 | ponto |
Dimensão do módulo | 50.50 × 15.75 × 2.01 | mm |
Área ativa | 42.22 × 10.54 | mm |
Tamanho do ponto | 0.308 × 0.308 | mm |
Distância entre pontos | 0.33 × 0.33 | mm |
Modo de exibição | Passive Matrix | |
Cor de exibição | Monochrome | |
Drive Duty | 1/32 Duty | |
IC | CH1115 | |
Interface | SPI,I2C | |
Tamanho | 0,71 polegadas |
Classificações Máximas Absolutas
Parameter | Símbolo | Valor Min | Valor Máximo | Unidade |
---|---|---|---|---|
Supply Voltage for Logic | VDD | -0.3 | 3.6 | V |
Supply Voltage for Display | VPP | -0.3 | 14.5 | V |
Temperatura de operação | TOP | -40 | +80 | °C |
Temperatura de armazenamento | TSTG | -40 | +85 | °C |
Classificações Máximas Absolutas
Item | Símbolo | Condição | Valor Min | Valor Típico | Valor Máximo | Unidade |
---|---|---|---|---|---|---|
Supply Voltage for Logic | VDD | - | 1.65 | 3.0 | 3.3 | V |
Supply Voltage for Display | VPP | - | 6.4 | 12.0 | 12.5 | V |
High Level Input | VIH | - | 0.8×VDD | - | VDD | V |
Low Level Input | VIL | - | VSS | - | 0.2×VDD | V |
High Level Output | VOH | - | 0.8×VDD | - | VDD | V |
Low Level Output | VOL | - | VSS | - | 0.2×VDD | V |
Display 50% Pixel on | IPP | VPP=12V | - | 5 | 10 | mA |