Home Products TFT Display Ultra Wide Temperature TFT WF104GTWAMLNB0

Wide Temperature 10.4" LVDS TFT LCD Display with PCAP

Model No. WF104GTWAMLNB0

►Size : 10.4”
►Resolution : 1024 x 768 dots
►View Direction : IPS (80/80/80/80 min)
►Interface : LVDS
►Driver IC: --
►Control-Board : No
►Brightness (cd/m²): 400
►Frame Through Hole : No
►Touch Screen : Projected capacitive touch screen (PCAP)
►Detect Point : 2 Fingers
►Operating Temperature : -30~+80 °C (Wide Temperature)

Description

WF104GTWAMLNB0 is a 10.4-inch Wide Temperature IPS TFT-LCD module with a Projected Capacitive Touch Panel. It has a resolution of 1024x768 pixels and supports an LVDS interface. WF104GTWAMLNB0 adopts an IPS panel, offering wider viewing angles of Left: 80° / Right: 80° / Up: 80° / Down: 80° (minimum), a contrast ratio of 1000:1 (typical), and a brightness of 400 nits (typical), with a glare surface panel and an aspect ratio of 4:3.

For customers requiring a High Brightness version, please choose WF104GSWAMLNB0.

The supply voltage (VDD) for WF104GTWAMLNB0 ranges from 3.0V to 3.6V, with a typical value of 3.3V. It can operate at temperatures ranging from -30°C to +80°C and can be stored within the same temperature range.

Customers who do not require a touch panel option can choose either module WF104GTWAMLNN0 or WF104GSWAMLNN0 (High Brightness version). As Mitsubishi has announced the cessation of TFT-LCD module manufacturing, customers can consider our WF104G series as a replacement for Mitsubishi's 10.4-inch displays.

Assembly Instructions: Please note that assembly requires the use of edge-measuring keyholes for fixing and support. Ensure proper alignment during installation to avoid misplacement.

DRAWING

Wide Temperature 10.4 LVDS TFT LCD Display with PCAP - WF104GTWAMLNB0

SPECIFICATIONS

General Specifications

Item Dimension Unit
Size 10.4 inch
Resolution 1024 × RGB × 768 (TFT) dots
Module dimension 240.6 × 190.8 × 15.65 mm
Active area 210.432 × 157.824 mm
Pixel Pitch 0.2055 × 0.2055 mm
LCD type TFT, Normally Black, Transmissive
Viewing Angle 80/80/80/80 min
Aspect Ratio 4:3
TFT Interface LVDS
Backlight Type LED, Normally White
PCAP IC ILI2511 or Equivalent
PCAP Interface USB
PCAP FW Version 0x06.0x00.0x00.0x00.0x00.0x00.0x00.0x00
PCAP Resolution 16384*16384
Touch Panel Projected capacitive touch screen (PCAP)
Surface Glare
Screw torque M2 Min:1.4 Max:2.2 (Unit, Kgf.cm)
M3 Min:2.0 Max:2.4 (Unit, Kgf.cm)
Assembly Instructions Need to use edge measuring keyholes to perform fixing and support

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -30 +80
Storage Temperature TST -30 +80

Electrical Characteristics

Operating conditions

Item Symbol Standard Value Unit
Min Typ Max
Power voltage VDD 3 3.3 3.6 V
Supply PCAP USB_VDD 5V 4.4 5 5.5 V
I VDD 5V 95 145 mA
Input logic high voltage VIH 0.7 VDD - VDD V
Input logic low voltage VIL 0 - 0.3 VDD V
Current for Power IVDD - 385 424 mA

Interface

1.LCM PIN Definition (CON1)

Pin Symbol Function
1-2 VDD Power supply: + 3.3V
3-4 GND Ground
5 Link0- 0-  LVDS differential data input 
6 Link0+ 0+ LVDS differential data input 
7 GND Ground
8 Link1- 1-  LVDS differential data input
9 Link1+ 1+ LVDS differential data input
10 GND Ground
11 Link2- 2- LVDS differential data input 
12 Link2+ 2+ LVDS differential data input
13 GND Ground
14 CLKIN- - LVDS differential clock input
15 CLKIN+ + LVDS differential clock input
16 GND Ground
17 Link3- 3- LVDS differential data input
18 Link3+ 3+ LVDS differential data input 
19 MODE LVDS 6/8 bit select function control,
Low or NC →6bit Input Mode; High →8bit Input Mode
20 SC Scan direction selector (Low: Normal ;High: Reverse)

2.CON2

Pin Symbol Function
1-2 VLED 12V 12V input
3-4 GND Ground
5 BLEN Backlight ON-OFF
6 LED PWM Light Dimming Control (PWM) Input Voltage
(Low active)

3. CON3

Pin Symbol Function
1-3 NC No connection
4 Vss Power ground.
5-8 NC No connection
9 RESET RST
10 USB_D- D-
11 USB_D+ D+
12 USB_VDD 5V Power supply
go top
close

We value your privacy

By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.

We value your privacy

Winstar and certain third parties use cookies on www.winstar.com.tw. The details regarding the types of
cookies, their purpose and the third parties involved are described below and in our Cookie Policy.
Please click on “Allow All” to consent to our usage of cookies in order to have the best possible
experience on our websites. You can also set your preferences or reject cookies (except for strictly
necessary cookies).

Manage Consent Preferences

Always Active
Essential Cookies

These cookies are essential in order to enable you to move around the website and use its
features, such as setting your privacy preferences, logging in or filling in forms.

Analytics Cookies

Also known as “statistics cookies,” these cookies collect information about how you use a website, like which pages you visited and which links you clicked on. See Detail