Model No. WF70D5SWAHLNGA
►Size : 7 inch
►Resolution : 1024x600 pixels
►Glass Cover Display
►View Direction : 80/80/80/80 (IPS)
►Interface : LVDS
►Driver IC：JD9165BA
►Control-Board : No
►Brightness(cd/m²) : 1000
►Frame Through Hole : No
►Touch Screen : projected capacitive touchscreen
►Touch Points: 5
►Operating Temperature : -30~+85°C (Wide Temperature)
WF70D5SWAHLNGA is a 7-inch glass cover TFT LCD display with a 1024×600 resolution and a projected capacitive touch panel (PCAP). This model is equipped with a JD9165BA driver IC and supports an LVDS interface.
The display provides a typical brightness of 1000 cd/m² and a contrast ratio of 1000:1. The IPS panel offers wide viewing angles (80/80/80/80, typical). The module dimension is 169.9 × 103.4 × 7.3 mm, with an active area of 154.2144 × 85.92 mm.
The capacitive touch panel is driven by a GT911 controller IC, supporting an I2C interface and up to 5-point multi-touch. The module supports a wide operating temperature range from -30°C to +85°C, ensuring reliable performance in harsh environments. The integrated cover glass enhances surface durability and provides additional protection against impact and scratches.
| Item | Dimension | Unit |
|---|---|---|
| Size | 7.0 | inch |
| Dot Matrix | 1024 × RGB × 600(TFT) | dots |
| Module dimension | 202.0(W) × 135.5(H) × 8.4(D) | mm |
| Active area | 154.2144 × 85.92 | mm |
| Pixel pitch | 0.1506 × 0.1432 | mm |
| LCD type | TFT, Normally Black, Transmissive | |
| View Angle | 80/80/80/80 | |
| TFT Driver IC | JD9165BA | |
| Backlight Type | LED, Normally White | |
| TFT Interface | LVDS | |
| PCAP IC | GT911 | |
| PCAP Interface | I2C | |
| PCAP FW Version | 67 | |
| PCAP Resolution | 1024*600 | |
| Touch Panel | Projected capacitive touch panel (PCAP) | |
| Surface | Glare | |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -30 | － | +85 | ℃ |
| Storage Temperature | TST | -30 | － | +85 | ℃ |
| Item | Symbol | Min. | Typ. | Max. | Unit |
|---|---|---|---|---|---|
| Power voltage | VDD | 3.0 | 3.3 | 3.6 | V |
| Analog Power | AVDD | - | 11 | - | V |
| TFT Gate ON Voltage | VGH | 19.5 | 20 | 20 | V |
| TFT Gate OFF Voltage | VGL | -8.5 | -8 | -7.5 | V |
| TFT Common Voltage | Vcom | - | 4.9 | - | V |
| Power Current | IDD | - | 18 | 27 | mA |
| Analog Power Current | IAVDD | - | 20.94 | - | mA |
| TFT Gate ON Current | IVGH | - | 1.5 | - | mA |
| TFT Gate OFF Current | IVGL | - | 1.5 | - | mA |
| TFT Common Current | IVCOM | - | 1 | - | uA |
| Supply CTP | VDDT | 3.0 | 3.3 | 3.5 | V |
| ICTP | － | 16 | 24 | mA |
| Parameter | Symbol | Min. | Typ. | Max. | Unit |
|---|---|---|---|---|---|
| LED current | － | － | 240 | － | mA |
| LED voltage | VLED+ | 16.2 | 19.2 | 21.0 | V |
| LED Life Time | － | 50,000 | － | － | Hr |
| Pin No. | Symbol | Function |
|---|---|---|
| 1 | VCOM | Common Voltage |
| 2 | VDD | Digital circuit |
| 3 | VDD | Digital circuit |
| 4 | NC | No connection |
| 5 | RESET | Global reset pin |
| 6 | STBYB | Standby mode, Normally pulled high STBYB = “1”, normal operation STBYB = “0”, timing controller, source driver will turn off, all output are High-Z |
| 7 | GND | Ground |
| 8 | RXIN0- | Negative LVDS differential data input |
| 9 | RXIN0+ | Positive LVDS differential data input |
| 10 | GND | Ground |
| 11 | RXIN1- | Negative LVDS differential data input |
| 12 | RXIN1+ | Positive LVDS differential data input |
| 13 | GND | Ground |
| 14 | RXIN2- | Negative LVDS differential data input |
| 15 | RXIN2+ | Positive LVDS differential data input |
| 16 | GND | Ground |
| 17 | RXCLKIN- | Negative LVDS differential clock input |
| 18 | RXCLKIN+ | Positive LVDS differential clock input |
| 19 | GND | Ground |
| 20 | RXIN3- | Negative LVDS differential data input |
| 21 | RXIN3+ | Positive LVDS differential data input |
| 22 | GND | Ground |
| 23 | NC | No connection |
| 24 | NC | No connection |
| 25 | GND | Ground |
| 26 | NC | No connection |
| 27 | NC | No connection |
| 28 | SELB | 6bit/8bit mode select H:6bit / L:8bit |
| 29 | AVDD | Power for Analog Circuit |
| 30 | GND | Ground |
| 31 | VLED- | LED_ Cathode |
| 32 | VLED- | LED_ Cathode |
| 33 | L/R | Horizontal inversion |
| 34 | U/D | Vertical inversion |
| 35 | VGL | Negative power for TFT |
| 36 | NC | No connection |
| 37 | NC | No connection |
| 38 | VGH | Positive power for TFT |
| 39 | VLED+ | LED_ Anode |
| 40 | VLED+ | LED_ Anode |
| Pin | Symbol | Function |
|---|---|---|
| 1 | VSS | Ground for analog circuit |
| 2 | VDDT | Power Supply : +3.3V |
| 3 | SCL | I2C clock input |
| 4 | NC | No connect |
| 5 | SDA | I2C data input and output |
| 6 | NC | No connect |
| 7 | /RST | External Reset, Low is active |
| 8 | NC | No connect |
| 9 | /INT | External interrupt to the host |
| 10 | VSS | Ground for analog circuit |
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.
