Model No. WF70D2SWAGLNG0
►Size : 7-inch
►Resolution : 800x480 pixels
►View Direction : IPS
►Interface : LVDS
►Driver IC : RM53052+RM57452
►Control-Board : No
►Brightness(cd/m²): 1000
►Frame Through Hole : No
►Touch Screen : Projected Capacitive Touch Panel (PCAP)
►Detect Point : 5 Fingers
►Operating Temperature : -30~+80 °C (Wide Temperature)
WF70D2SWAGLNG0 is a 7-inch high brightness TFT LCD display with an 800×480 resolution, projected capacitive touch panel (PCAP), and an LVDS interface. This model is equipped with RM53052 and RM57452 driver ICs.
The display provides a typical brightness of 1000 cd/m² and a contrast ratio of 1500:1. The IPS panel offers wide viewing angles (85/85/85/85, typical). The module dimension is 165.0 × 104.6 × 7.3 mm, with an active area of 152.4 × 91.44 mm.
The capacitive touch panel is driven by an ILI2130 controller IC, supporting an I2C interface and up to 5-point multi-touch. The module operates from -30°C to +80°C.
| Item | Dimension | Unit |
|---|---|---|
| Size | 7.0 | inch |
| Dot Matrix | 800 × RGB × 480(TFT) | dots |
| Module dimension | 165.0(W) × 104.6(H) × 7.3 (D) | mm |
| Active area | 152.4 × 91.44 | mm |
| Pixel pitch | 0.1905 × 0.1905 | mm |
| LCD type | TFT, Normally Black, Transmissive | |
| View Angle | 85/85/85/85 | |
| TFT IC | RM53052+RM57452 | |
| Aspect Ratio | 16:9 | |
| Backlight Type | LED, Normally White | |
| TFT Interface | LVDS | |
| PCAP Driver IC | ILI2130 | |
| PCAP Interface | I2C | |
| PCAP FW Version | 0x07.0x00.0x00.0x00.0x70.0x44.0x0A.0x02 | |
| PCAP Resolution | 16384*16384 | |
| Touch Panel | Projected Capacitive Touch Panel (PCAP) | |
| Surface | Glare | |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -30 | － | +80 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
| Item | Symbol | Values | Unit | ||
|---|---|---|---|---|---|
| Min. | Typ. | Max. | |||
| Power voltage | VDD | 2.9 | 3.3 | 3.6 | V |
| Analog Power | AVDD | - | 13.0 | - | V |
| TFT Gate ON Voltage | VGH | - | 25.0 | - | V |
| TFT Gate OFF Voltage | VGL | - | -5.9 | - | V |
| TFT Common Voltage | Vcom | - | 6.2 | - | V |
| Power Current | IDD | - | 19.3 | 29 | mA |
| Analog Power Current | IAVDD | - | 11.5 | 18 | mA |
| TFT Gate ON Current | IVGH | - | 0.27 | 1.0 | mA |
| TFT Gate OFF Current | IVGL | - | 0.27 | 1.0 | mA |
| TFT Common Current | IVCOM | - | 1.3 | 2 | uA |
| Supply CTP | VDDT | 3.1 | 3.3 | 3.5 | V |
| ICTP | － | 65 | 100 | mA | |
| Parameter | Symbol | Min. | Typ. | Max. | Unit |
|---|---|---|---|---|---|
| LED current | － | － | 110 | － | mA |
| LED voltage | VLED+ | 22.4 | 24.0 | 25.6 | V |
| LED Life Time | － | 50,000 | － | － | Hr |
| Pin No. | Symbol | Function |
|---|---|---|
| 1 | VCOM | Common Voltage |
| 2 | VDD | Digital circuit |
| 3 | VDD | Digital circuit |
| 4 | NC | No connection |
| 5 | RESET | Global reset pin |
| 6 | STBYB | Standby mode, Normally pulled high STBYB = “1”, normal operation STBYB = “0”, timing controller, source driver will turn off, all output are High-Z |
| 7 | GND | Ground |
| 8 | RXIN0- | Negative LVDS differential data input |
| 9 | RXIN0+ | Positive LVDS differential data input |
| 10 | GND | Ground |
| 11 | RXIN1- | Negative LVDS differential data input |
| 12 | RXIN1+ | Positive LVDS differential data input |
| 13 | GND | Ground |
| 14 | RXIN2- | Negative LVDS differential data input |
| 15 | RXIN2+ | Positive LVDS differential data input |
| 16 | GND | Ground |
| 17 | RXCLKIN- | Negative LVDS differential clock input |
| 18 | RXCLKIN+ | Positive LVDS differential clock input |
| 19 | GND | Ground |
| 20 | RXIN3- | Negative LVDS differential data input |
| 21 | RXIN3+ | Positive LVDS differential data input |
| 22 | GND | Ground |
| 23 | NC | No connection |
| 24 | NC | No connection |
| 25 | GND | Ground |
| 26 | NC | No connection |
| 27 | NC | No connection |
| 28 | SELB | 6bit/8bit mode select H:8bit / L:6bit |
| 29 | AVDD | Power for Analog Circuit |
| 30 | GND | Ground |
| 31 | NC | No connection |
| 32 | NC | No connection |
| 33 | L/R | Horizontal inversion |
| 34 | U/D | Vertical inversion |
| 35 | VGL | Negative power for TFT |
| 36 | NC | No connection |
| 37 | NC | No connection |
| 38 | VGH | Positive power for TFT |
| 39 | NC | No connection |
| 40 | NC | No connection |
| Pin No. | Symbol | Description |
|---|---|---|
| 1 | VLED+ | Red, LED_ Anode |
| 2 | VLED- | White, LED_ Cathode |
| Pin | Symbol | Function |
|---|---|---|
| 1 | VSS | Ground for analog circuit |
| 2 | VDDT | Power Supply : +3.3V |
| 3 | SCL | I2C clock input |
| 4 | NC | No connect |
| 5 | SDA | I2C data input and output |
| 6 | NC | No connect |
| 7 | /RST | External Reset, Low is active |
| 8 | NC | No connect |
| 9 | /INT | External interrupt to the host |
| 10 | VSS | Ground for analog circuit |
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.
