Model No. WF70A2SIAGDNGA
►Size : 7 inch
►Resolution : 800x480 dots
►View Direction: 12H
►Interface : RGB
►Driver IC : ST5623D + ST5091D
►Control-Board : No
►Brightness(cd/m²) : 700
►Frame Through Hole : No
►Touch Screen : Projected Capacitive Touch Panel (PCAP)
►Detect Point : 5 Fingers
WF70A2SIAGDNGA is a high-brightness TFT LCD module with a projected capacitive touch panel (PCAP), featuring a resolution of WVGA 800x480 pixels and a diagonal size of 7 inches. This TFT model is equipped with the ST-5623 and ST-5091 driver ICs, offering a high brightness of 700 nits (typical value). The WF70A2 TFT model supports an RGB interface, and the PCAP touch screen IC is the ILI2130, which supports an I2C interface and 5-point touch.
The supply voltage for logic (VCC) of the WF70A2SIAGDNGA ranges from 3.0V to 3.6V, with a typical value of 3.3V. It features a glare surface panel, a viewing direction of 12 o'clock, gray scale inversion at 6 o'clock, and an aspect ratio of 16:9. The contrast ratio is 800:1 (typical value). It operates at temperatures from -20℃ to +70℃ and has a storage temperature range from -30℃ to +80℃. The WF70A2SIAGDNGA is highly suitable for outdoor applications, such as outdoor measuring equipment and GPS navigation systems.
| Item | Dimension | Unit |
|---|---|---|
| Size | 7.0 | inch |
| Dot Matrix | 800 x RGB x 480 (TFT) | dots |
| Module dimension | 165 x 100.0 x 7.45 | mm |
| Active area | 154.08 x 85.92 | mm |
| Pixel Pitch | 0.1926 x 0.179 | mm |
| LCD type | TFT, Normally White, Transmissive | |
| View Direction | 12 o'clock | |
| Gray Scale Inversion Direction | 6 o'clock | |
| Aspect Ratio | 16:9 | |
| Backlight Type | LED, Normally White | |
| TFT Interface | 24-bit RGB | |
| Color arrangement | RGB-STRIPE | |
| Driver IC | ST5623D + ST5091D | |
| PCAP IC | ILI2130 or Equivalent | |
| PCAP Interface | I2C | |
| PCAP FW Version | 0x07.0x00.0x00.0x00.0x65.0x90.0x00.0x01 | |
| PCAP Resolution | 16384*16384 | |
| Touch Screen | Projected capacitive touchscreen (PCAP) | |
| Surface | Glare | |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -20 | － | +70 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Supply Voltage For Logic | VCC | 3.0 | 3.3 | 3.6 | V |
| Supply CTP | VDDT | 3.0 | 3.3 | 3.6 | V |
| ICTP | － | 65 | 98 | mA | |
| Power voltage | AVDD | 10.2 | 10.4 | 10.6 | V |
| Power Supply For Current | VCC =3.3V | - | 7.5 | 15 | mA |
| Power voltage | VGH | 14.5 | 15.0 | 15.5 | V |
| Power voltage | VGL | -10.5 | -10 | -9.5 | V |
| Input signal voltage | VCOM | 3.54 | 4.04 | 4.54 | V |
| Power AVDD For Current | IADD | - | 25 | - | mA |
| Power VGH For Current | IGH | - | 0.2 | - | mA |
| Power VGL For Current | IGL | - | 0.2 | - | mA |
| Power VCOM For Current | ICOM | - | 0.7 | - | mA |
| Pin | Symbol | Function |
|---|---|---|
| 1 | LED+ | Power supply for backlight |
| 2 | LED+ | Power supply for backlight |
| 3 | LED- | Backlight ground |
| 4 | LED- | Backlight ground |
| 5 | GND | Power ground |
| 6 | VCOM | Common voltage |
| 7 | VCC | Power for Digital Circuit |
| 8 | MODE | DE/SYNC mode select |
| 9 | DE | Data Input Enable (DEN) |
| 10 | VS | Vertical Sync Input (VSD) |
| 11 | HS | Horizontal Sync Input (HSD) |
| 12 | B7 | Blue data(MSB) |
| 13 | B6 | Blue data |
| 14 | B5 | Blue data |
| 15 | B4 | Blue data |
| 16 | B3 | Blue data |
| 17 | B2 | Blue data |
| 18 | B1 | Blue data |
| 19 | B0 | Blue data(LSB) |
| 20 | G7 | Green data(MSB) |
| 21 | G6 | Green data |
| 22 | G5 | Green data |
| 23 | G4 | Green data |
| 24 | G3 | Green data |
| 25 | G2 | Green data |
| 26 | G1 | Green data |
| 27 | G0 | Green data(LSB) |
| 28 | R7 | Red data(MSB) |
| 29 | R6 | Red data |
| 30 | R5 | Red data |
| 31 | R4 | Red data |
| 32 | R3 | Red data |
| 33 | R2 | Red data |
| 34 | R1 | Red data |
| 35 | R0 | Red data(LSB) |
| 36 | GND | Power Ground |
| 37 | DCLK | Sample clock (CLK) |
| 38 | GND | Power Ground |
| 39 | L/R | Left / right selection |
| 40 | U/D | Up/down selection |
| 41 | VGH | Gate ON Voltage |
| 42 | VGL | Gate OFF Voltage |
| 43 | AVDD | Power for Analog Circuit |
| 44 | RESET | Global reset pin. |
| 45 | NC | No connection |
| 46 | VCOM | Common Voltage |
| 47 | DITHB | Dithering function |
| 48 | GND | Power Ground |
| 49 | NC | No connection |
| 50 | NC | No connection |
| Pin | Symbol | Function |
|---|---|---|
| 1 | VSS | Ground for analog circuit |
| 2 | VDDT | Power Supply : +3.3V |
| 3 | SCL | I2C clock input |
| 4 | NC | No connect |
| 5 | SDA | I2C data input and output |
| 6 | NC | No connect |
| 7 | RST | External Reset, Low is active |
| 8 | NC | No connect |
| 9 | INT | External interrupt to the host |
| 10 | VSS | Ground for analog circuit |
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.
