Model No. WG160160E5/E3
►Graphics LCD 160x160
►Type: Graphic
►Structure: COB
►Size: 3.38"
►IC: RA8806
►WG160160E3: +3.3V power supply / WG160160E5: +5V power supply
►Chinese version
►1/160 duty cycle
►Interface: 8080
Winstar standard LCD graphics modules WG160160E3 / WG160160E5 are built in with RA8806 controller IC. This LCD graphics module supports Traditional Chinese and Simplified Chinese Font, it communicates via 8080 parallel interface; 3.3V / 5V power supply. It can be operating at temperatures from -20℃ to +70℃; its storage temperatures range from -30℃ to +80℃.
Data source ref: WG160160E3-TFH-VGB#
| Pin No. | Symbol | Level | Description |
|---|---|---|---|
| 1 | FGND | － | Frame Ground |
| 2 | VSS | － | GND |
| 3 | Vdd | － | Power supply ( +5.0 V ) |
| 4 | Vo | － | Power supply for LCD driver |
| 5 | /WR | I | Write When MPU I/F is 8080 series, this pin (WR) is used as data write, active low. |
| 6 | /RD | I | Read Enable When MPU interface(I/F) is 8080 series, this pin (RD) is used as data read, active low. |
| 7 | /CS | I | Chip Select Input |
| 8 | RS | I | Command / Data Select Input |
| 9 | BUSY | O | Busy Signal Output |
| 10 | /RST | I | Reset Signal Input |
| 11 | DB0 | I/O | Data bus line |
| 12 | DB1 | I/O | Data bus line |
| 13 | DB2 | I/O | Data bus line |
| 14 | DB3 | I/O | Data bus line |
| 15 | DB4 | I/O | Data bus line |
| 16 | DB5 | I/O | Data bus line |
| 17 | DB6 | I/O | Data bus line |
| 18 | DB7 | I/O | Data bus line |
| 19 | NC | — | No connection |
| 20 | Vee | — | Negative voltage output |
| Item | Dimension | Unit |
|---|---|---|
| Number of dots | 160 × 160 | － |
| Module dimension | 85.0 × 100.0 × 14.5 (MAX) | mm |
| View area | 62.0 × 62.0 | mm |
| Active area | 60.78 × 60.78 | mm |
| Dot size | 0.36 × 0.36 | mm |
| Dot pitch | 0.38 × 0.38 | mm |
| Duty | 1/160 | |
| Backlight Type | LED | |
| IC | RA8806 | |
| Interface | 8080 family | |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -20 | － | +70 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
| Input voltage | VIN | -0.3 | － | VDD+0.3 | V |
| Supply Voltage For Logic | VDD-VSS | -0.3 | － | 6.5 | V |
| Item | Symbol | Condition | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage For Logic | VDD-VSS | － | 4.5 | 5.0 | 5.5 | V |
| Supply Voltage For LCM | VDD-V0 | Ta=-20℃ Ta=25℃ Ta=70℃ |
－ 17.9 － |
－ 18.4 － |
－ 18.9 － |
V V V |
| Input High Volt. | VIH | － | 0.8 VDD | － | VDD | V |
| Input Low Volt. | VIL | － | 0 | － | 0.2 VDD | V |
| Output High Volt. | VOH | － | VDD -0.4 | － | VDD | V |
| Output Low Volt. | VOL | － | 0 | － | VDD +0.4 | V |
| Supply Current | IDD | VDD=5.0V | － | 26.3 | 40.0 | mA |
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.
