Home Products OLED Module OLED Touch Display WEP012832A-CTP

2.23" 128x32 Capacitive Touch OLED Display

Model No. WEP012832A-CTP

►Graphic OLED Display
►2.23" OLED
►Structure: COG + Frame + PCB
►128×32 Dot Matrix
►IC:SSD1305
►3V power supply
►1/32 duty cycle
►Interface: 6800, 8080, SPI, I2C
►With Capacitive Touch Screen (CTP)
►Detect Point : 1 Finger
►Display Color: White / Yellow / Blue

Description

WEP012832A model has extension item with Capacitive Touch Panel on module; it’s 2.23" diagonal size, made of 128x32 dot matrix. This OLED module is built-in with SSD1305 IC; it supports 6800/8080 8-bit parallel, I2C, and 4-Wire SPI interface, supply voltage for logic 3.3V, the display with 50% Check board current is 85mA @3.3VDD (typical value), driving duty 1/32, supply voltage for logic 3.0V~5.0V (VDD). This model is having Capacitive Touch Panel on module; it is built-in with FT6336U IC which supports I2C interface, detect point on 1 finger, normal glare surface glass.

WEP012832A-CTP model is a COG OLED display with a PCB on module. There are two methods for options to fix modules on customers’ applications; one is using mounting holes to fix the modules, the other one is using metal pins on PCB board. Furthermore, we provide three options of interface connection for customers to choose, hot bar soldering, metal pins or FPC with connector. We also provide a mini vibration motor and buzzer optional as well.

This OLED module is suitable for smart home application, medical device, smart control, etc. WEP012832A-CTP module can be operating at temperatures from -20℃ to +70℃; its storage temperatures range from -40℃ to +85℃.

DRAWING

2.23 128x32 Capacitive Touch OLED Display - WEP012832A-CTP - Winstar Display

Data source ref: WEP012832AWPP3D00001

SPECIFICATIONS

Interface Pin Function

No. Symbol Function
1 VSS Ground.
2 VDD Power supply pin for core logic operation.
3 V0 Keep float (i.e. disable). Power supply for panel driving voltage. This is also the most positive power voltage supply pin.
4 D/C# This is Data/Command control pin. When it is pulled HIGH (i.e. connect to VDDIO), the data at D[7:0] is treated as data. When it is pulled LOW, the data at D[7:0] will be transferred to the command register.
In I2C mode, this pin acts as SA0 for slave address selection.
5 R/W# This is read / write control input pin connecting to the MCU interface.
When interfacing to a 6800-series microprocessor, this pin will be used as Read/Write (R/W#) selection input. Read mode will be carried out when this pin is pulled HIGH (i.e. connect to VDDIO) and write mode when LOW. When 8080 interface mode is selected, this pin will be the Write (WR#) input. Data write operation is initiated when this pin is pulled LOW and the chip is selected.
When serial interface is selected, this pin must be connected to VSS.
6 E/RD# When interfacing to a 6800-series microprocessor, this pin will be used as the Enable (E) signal. Read/write operation is initiated when this pin is pulled HIGH (i.e. connect to VDDIO)
and the chip is selected.
When connecting to an 8080-microprocessor, this pin receives the Read (RD#) signal. Read operation is initiated when this pin is pulled LOW and the chip is selected.
When serial interface is selected, this pin must be connected to VSS.
7~14 DB0~DB7 These are 8-bit bi-directional data bus to be connected to the microprocessor’s data bus.
When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SDIN and D2 should be left opened. When I2C mode is selected, D2, D1 should be tied together and serve as SDAout, SDAin in application and D0 is the serial clock input, SCL.
15 CS# This pin is the chip select input. (active LOW)
16 RES# This pin is reset signal input. When the pin is LOW, initialization of the chip is executed.
Keep this pin HIGH (i.e. connect to VDDIO) during normal operation.
17,18 BS1, BS2 Communicating Protocol Select.
These pins are MCU interface selection input. See the following table:
  68XX-parallel 80XX-parallel Serial I2C
BS1 0 1 0 1
BS2 1 1 0 0
19 N.C. No connection.
20 FG(GND) Ground.
21 TP_SCK I2C Clock
22 TP_SDA I2C Data
23 TP_INT Interrupt Output
This pin is used as the dedicated interrupt output signal.
24 TP_RST Hardware Reset
This pin is to reset hardware for this chip.
25 TP_VDD Power supply pin for only touch panel (3.3V).
26 VSS Ground.
27 N.C. No connection.
28 N.C. No connection.

Mechanical Data

Item Dimension Unit
Dot Matrix 128 x 32 Dots
Module dimension 66.5 x 35.0 x 10.55(Max) mm
Active Area 55.018 x 13.098 mm
Pixel Size 0.408 x 0.388 mm
Pixel Pitch 0.43 x 0.41 mm
Display Mode Passive Matrix
Display Color Monochrome
Drive Duty 1/32 Duty
IC SSD1305
OLED Interface 6800, 8080, 4-Wire SPI, I2C
Size 2.23 inch
 
CTP IC FT6336U
Detect Point 1
CTP Interface I2C
Surface Normal Glare

Absolute Maximum Ratings

Parameter Symbol Min Max Unit
Supply Voltage for Logic VDD -0.3 4.0 V
Supply Voltage for Display V0 0 16.0 V
Operating Temperature TOP -20 +70 °C
Storage Temperature TSTG -40 +85 °C
 

Touch Panel Controller FT6336U

Parameter Symbol Min Max Unit
Power Supply Voltage VDD -0.3 3.6 V

Electronical Characteristics

DC Electrical Characteristics

Item Symbol Condition Min Typ Max Unit
Supply Voltage for Logic VDD 3.2 3.3 3.5 V
Supply Voltage for Display V0 12.0 12.5 13.0 V
Input High Volt. VIH 0.8×VDD VDD V
Input Low Volt. VIL 0 0.2×VDD V
Output High Volt. VOH IOUT = 100uA, 3.3MHz 0.9×VDD VDD V
Output Low Volt. VOL IOUT = 100uA, 3.3MHz 0 0.1×VDD V
Operating Current for VDD 50% Check Board IDD V0 =12.5V - 85 128 mA
 

Touch Panel Controller FT6336U

Item Symbol Condition Min Typ Max Unit
Supply Voltage VDD 2.8 3.0 3.3 V
Input High Volt. VIH 0.7xVDD VDD V
Input Low Volt. VIL -0.3 0.3xVDD V
Output High Volt. VOH IOH = -0.1mA 0.7xVDD V
Output Low Volt. VOL IOH = 0.1mA 0.3xVDD V

Search keyword: 128x32 oled, oled 128x32, 2.23 oled, 2.23" oled, 2.23 inch oled, oled 2.23, oled 2.23"
go top
close

We value your privacy

By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.

We value your privacy

Winstar and certain third parties use cookies on www.winstar.com.tw. The details regarding the types of
cookies, their purpose and the third parties involved are described below and in our Cookie Policy.
Please click on “Allow All” to consent to our usage of cookies in order to have the best possible
experience on our websites. You can also set your preferences or reject cookies (except for strictly
necessary cookies).

Manage Consent Preferences

Always Active
Essential Cookies

These cookies are essential in order to enable you to move around the website and use its
features, such as setting your privacy preferences, logging in or filling in forms. See
Detail.

Analytics Cookies

Also known as “statistics cookies,” these cookies collect information about how you use a website, like which pages you visited and which links you clicked on. See Detail