16x2 COB OLED Character Display
Model No. WEH001602A
►Type: Character
►Structure : COB
►16 characters x 2 Lines
►IC:WS0010-TX
►5V power supply
►1/16 duty cycle
►Interface: 6800, option 8080, SPI
►Compatible to STN LCD WH1602B
►Display Color: White / Yellow / Blue / Green / Red
Description
The OLED WEH001602A has the same outline size, VA size and pin out as Winstar LCD item no. WH1602B. We suggest customers to consider using this low power 16x2 character OLED to replace your existing STN character display or new projects. There are different interfaces optional for this model; its default 6800, available options 8080 and SPI. All Winstar standard COB OLED Character types are built-in with all-in-one Fonts controller IC; which offer 4 font sets on 1 device. These include English/Japanese, West European, Scandinavian European, and Cyrillic (Russian).
- Faster response time "At +25 ℃ 10 μsec."
- Unlimited viewing angle "Up to 175 degree"
- Thin – No need of backlight, self emitting
- High Brightness
- High contrast ratio "Up to 10,000:1"
- Wide Operation Temperature "-40 ℃ ~ 80 ℃"
- Lower power consumption - reduce CO2 emissions
Parts Options:
DRAWING
Data source ref: WEH001602AWPP5N00100
SPECIFICATIONS
Interface Pin Function
Pin No. | Symbol | Level | Description |
---|---|---|---|
1 | VSS | 0V | Ground |
2 | VDD | 5.0V | Supply Voltage for logic |
3 | NC | - | |
4 | RS | H/L | H: DATA, L: Instruction code |
5 | R/W | H/L | H: Read(Module→MPU) L: Write(MPU→Module) |
6 | E | H,H→L | Chip enable signal |
7 | DB0 | H/L | Data bit 0 |
8 | DB1 | H/L | Data bit 1 |
9 | DB2 | H/L | Data bit 2 |
10 | DB3 | H/L | Data bit 3 |
11 | DB4 | H/L | Data bit 4 |
12 | DB5 | H/L | Data bit 5 |
13 | DB6 | H/L | Data bit 6 |
14 | DB7 | H/L | Data bit 7 |
15 | NC | - | |
16 | NC | - |
General Specification
Item | Dimension | Unit |
---|---|---|
Number of Characters | 16 characters × 2 Lines | - |
Module dimension | 80.0 × 36.0 × 10.0(MAX) | mm |
View area | 66.0 × 16.0 | mm |
Active area | 56.95 × 11.85 | mm |
Dot size | 0.55 × 0.65 | mm |
Dot pitch | 0.60 × 0.70 | mm |
Character size | 2.95 × 5.55 | mm |
Character pitch | 3.6 × 6.3 | mm |
Panel type | OLED , Monochrome | |
Duty | 1/16 | |
IC | WS0010-TX | |
Interface | 6800, option 8080, SPI | |
Size | 2.29 inch |
Absolute Maximum Ratings
Item | Symbol | Min | Max | Unit |
---|---|---|---|---|
Operating Temperature | TOP | -40 | +80 | °C |
Storage Temperature | TST | -40 | +85 | °C |
Supply Voltage For Logic | VDD-VSS | -0.3 | 5.3 | V |
Electronical Characteristics
DC Electrical Characteristics
Item | Symbol | Condition | Min | Typ | Max | Unit |
---|---|---|---|---|---|---|
Supply Voltage For Logic | VDD-VSS | - | 4.8 | 5.0 | 5.3 | V |
Input High Volt. | VIH | - | 0.8x VDD | - | VDD | V |
Input Low Volt. | VIL | - | GND | - | 0.2x VDD | V |
Output High Volt. | VOH | IOH=-0.5mA | 0.8xVDD | - | VDD | V |
Output Low Volt. | VOL | IOL=0.5mA | GND | - | 0.2xVDD | V |
50% Check Board Operating Current | IDD | VDD=5V | 30 | 31 | 46.5 | mA |
Parts Options:
Item | Part No. | Material | Specification | Picture | Drawing |
---|---|---|---|---|---|
Machine Screw | OT31XXXXXXXXXXXX0052 | Stainless Steel 304 |
Drive type: Phillips Thread : M2 Length: 5mm |
||
Nut | OT31XXXXXXXXXXXX0017 | Stainless Steel | M2 x 1.5mm | ||
PIN | PN163A06003011XXXX02 | Brass / PBT (Polybutylene terephthalate) |
16P: B=6mm, C=3mm |
||
Self-tapping screws | OT31XXXXXXXXXXXX0047 | AISI1018 carbon structural steel |
HS 2.6*5 |
Search Keyword: 16x2 oled, oled 16x2