Model No. WO128128A
►COG LCD Display
►Type: Graphic
►Structure: COG
►Size: 2.45"
►Display Format : 128x128 dots
►IC: ST75161
►+3.3V power supply
►1/136 duty cycle
►Interface : 6800/8080/SPI/I2C
WO128128A is a 128x128 COG monochrome circular graphic LCD module featuring the ST75161 controller IC. The module supports 6800 and 8080 parallel, 3-wire and 4-wire SPI, and I2C interfaces. It is configured with a 6 o'clock viewing direction, a 1/136 duty cycle, and a 1/12 bias.
The module measures 55.0 x 57.0 x 6.18 mm, with a 42.0 x 42.0 mm view area and a 44.0 x 44.0 mm active area. It operates with a logic supply voltage (VDD) of 2.7V to 3.3V (typical 3.0V) and supports an operating temperature range of -20°C to +70°C and a storage temperature range of -30°C to +80°C.
The WO128128A is available in two display variants: WO128128A-TFH, featuring an FSTN positive display with a white LED backlight, and WO128128A-TDI, featuring an FSTN negative display. USB demo kits are available for both display variants. To request evaluation samples, demo kit availability, or a quotation, click ADD TO INQUIRY above and specify your requirements in the Message field.
Available Demo Kits
WWSTNUSBDEMO-00 – For WO128128A-TFH
WWSTNUSBDEMO-01 – For WO128128A-TDI
| Item | Dimension | Unit |
|---|---|---|
| Number of dots | 128 x 128 | － |
| Module dimension | 55.0 x 57.0 x 6.18 | mm |
| View area | 42.0 x 42.0 | mm |
| Active area | 44.0 x 44.0 | mm |
| Dot size | 0.308 x 0.308 | mm |
| Dot pitch | 0.328 x 0.328 | mm |
| Duty | 1/136 DUTY,1/12 BIAS | |
| Backlight Type | LED | |
| IC | ST75161 | |
| Interface | 68/80/4-Line SPI/I2C/9-bit 3-line serial interface | |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -20 | － | +70 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
| Power Supply Voltage | VDD | -0.3 | － | 4.0 | V |
| LCD Power supply voltage | VLCD | -0.3 | － | 20 | V |
| LCD Power supply voltage | V0-XV0 | -0.3 | － | 19 | V |
| Input voltage | VIN | -0.3 | VDD+0.3 | V |
| Item | Symbol | Condition | Min. | Typ. | Max. | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage For Logic | VDD-VSS | － | 2.7 | 3.0 | 3.3 | V |
| Supply Voltage For LCD | VOP | Ta=-20℃ Ta=25℃ Ta=70℃ |
－ 13.7 － |
－ 14.0 － |
－ 14.3 － |
V V V |
| Input High Volt. | VIH | － | 0.7 VDD | － | VDD | V |
| Input Low Volt. | VIL | － | Vss | － | 0.3 VDD | V |
| Output High Volt. | VOH | － | 0.8 VDD | － | VDD | V |
| Output Low Volt. | VOL | － | Vss | － | 0.2 VDD | V |
| Supply Current | IDD | VDD=3.0V | － | － | 2.0 | mA |
| Pin No. | SYMBOL | Function |
|---|---|---|
| 1 | VG | VG is the power of SEG-drivers. |
| 2 | V0 | Positive operating voltage of COM-drivers. |
| 3 | XV0 | Negative operating voltage of COM-drivers. |
| 4 | CA1P | DC/DC voltage converter |
| 5 | CA1N | |
| 6 | VDD | Power supply |
| 7 | VSS | Ground |
| 8 | COMSCN | Set scan direction of COM. |
| 9 | IF2 | These pins select interface operation mode. |
| 10 | IF1 | |
| 11 | IF0 | |
| 12 | CSB | Chip select input pin. |
| 13 | A0 | It determines whether the access is related to data or command. |
| 14 | ERD | Read / Write execution control pin. |
| 15 | RWR | Read / Write execution control pin. |
| 16 | RSTB | Hardware reset input pin |
| 17-24 | D0-D7 | When using 8-bit parallel interface: 8080 or 6800 mode:8 bit bi-directional data bus When using serial interface : 4-line SPI or 3-line SPI mode D[7:4] : fix to “H” by VDD1. D[3:1] : serial input/output data (SDA). D[0] : serial input clock (SCL). D1 to D3 must be connected together (SDA) When using serial interface : I2C interface D[7] : SA[1], I2C slave address bit. Must be connected to VDD1 or VSS1. D[6] : SA[0], I2C slave address bit. Must be connected to VDD1 or VSS1. D[5:4] : fix to “H” by VDD1. D[3:2] : SDA_OUT, serial data and acknowledge output for the I2C interface. D[1] : SDA_IN, serial input data D[0] : SCL, serial input clock . D1 to D3 must be connected together (SDA) CSB must be fixed to “L” by VSS1. |
| 25 | A | Anode input for LED backlight. |
| 26 | K | Cathode input for LED backlight |
circular lcd,circular lcd screen,circular lcd display,circular lcd display module
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.
