10.1" TFT LCD with Embedded Android Board
Model No. WUAAAA120V101ATCGX00
►Embedded Android Board
►Single Board Computer (SBC)
►CTU: ARM
►TFT Size: 10.1"
►With TFT Model No: WF101ATCJHLNGZ
►Resolution: 1024×600
►View Direction: 12H
►Interface: LVDS
►Touch Screen: With capacitive touch panel(PCAP)
►Power Supply: DC12V
►Operating System: Android 4.2.2
DESCRIPTION
WUAAAA120V101ATCGX00 is a Winstar Embedded Android Board model which is having an ARM based motherboard integrated a 10.1 inch TFT LCD module of WF101ATCJHLNGZ. This model is featured with 1024×600 resolution diagonal size 10.1” TFT LCD; it supports LVDS interface and with a Projected Capacitive Touch Panel (PCAP). This model supports Android 4.2.2 Operating Systems.
The motherboard WUAAAA120V0000N0NX00 (A Series) on this model is a single board computer (SBC) based on the NXP i.MX6 embedded System-on-chip (SoC). The SoC features a scalable multi-core ARM Cortex™ A9 processor with one to four corresponding versions. The module delivers high CPU and graphical performance with minimum power consumption.
WUAAAA120V0000N0NX00 i.MX6 incorporates DVFS (Dynamic Voltage and Frequency Scaling) and Thermal Throttling which enables the system to adjust operating frequency and voltage continuously. By changing in workload and temperature, it can be adjusted to be the best performance with the lowest power consumption.
The motherboard WUAAAA120V0000N0NX00 (A Series) on this model is a single board computer (SBC) based on the NXP i.MX6 embedded System-on-chip (SoC). The SoC features a scalable multi-core ARM Cortex™ A9 processor with one to four corresponding versions. The module delivers high CPU and graphical performance with minimum power consumption.
WUAAAA120V0000N0NX00 i.MX6 incorporates DVFS (Dynamic Voltage and Frequency Scaling) and Thermal Throttling which enables the system to adjust operating frequency and voltage continuously. By changing in workload and temperature, it can be adjusted to be the best performance with the lowest power consumption.
DRAWING
SPECIFICATIONS
Embedded Motherboard Specification
(Embedded Android Board)
| Form Factor | ||
|---|---|---|
| Cpu | NXP Cortex-A9 Dual core 1.0GHz (Quad core is optional) | |
| Processor System | Technology | DDR3 1GB x64 bit at 400MHz |
| Capacity | Onboard DDR3 1GB(2GB Max) | |
| Flash | 4GB(8GB Max) eMMC NAND Flash for Advantech boot loader | |
| LVDS | Dual output 24 bit LVDS(1024*600 or 1024*768) | |
| Graphic | RGB | 18-bits/24-bits TTL with DE+H/V sync(800*480) |
| Graphic engine | 3D GPU with 1 shadow | |
| H/W Vodeo codec | Support MPEG 1/2/4, H.262 Hardware Decoder. | |
| MIPI | Reserved | |
| Ethernet | Speed | Ethernet 10/100/1000 |
| USB | 2 x USB 2.0 Host ;1 x USB 2.0 OTG 2 x pin header |
|
| I/O | Audio | Wolfson (Line out) |
| Serial port | RS232 (1*DB9 ) ; RS485/422/232 (1 * pin header) | |
| SPI | 2 (Host, option) | |
| IIC | 2 (Client, option) | |
| Touch | 4-wire Resistive type(onboard)/ PCAP is driven IIC interface | |
| GPIO | 16-pin 3.3V TTL Level GPIOs | |
| Expansion | SD Socket | 1 * SD Slot |
| Power | Voltage | DC12V |
| Consumption | 2.5W | |
| Environment | Temperature | -10℃~60℃/ -20℃~70℃ |
| Dimension | Motherboard | 114mm * 95mm * 20mm |
TFT Specifications
| Item - WF101ATCJHLNGZ | Dimension | Unit |
|---|---|---|
| Size | 10.1 | inch |
| Dot Matrix | 1024 × RGB × 600(TFT) | Dots |
| Module Dimension | 235(W) × 143(H) × 5.36(D) | mm |
| Active Area | 222.72(H) × 125.28(V) | mm |
| Dot Pitch | 0.2175(W) × 0.2088(H) | mm |
| LCD Type | TFT, Normally White, Transmissive | |
| View Direction | 12 o'clock | |
| Gray Scale Inversion Direction | 6 o'clock | |
| Aspect Ratio | 4:3 | |
| Backlight Type | LED, Normally White | |
| With/Without TP | With PCAP | |
| Interface | LVDS | |
| Surface | Glare | |
