10.1" 1024x600 High Brightness MIPI IPS TFT Display
Model No. WF101JSYAHMNN0
►Size : 10.1 inch
►Resolution : 1024×600 dots
►View Direction : IPS
►Interface : 4-Lanes MIPI
►Driver IC : EK79007AD3 + EK73217BCGA
►Control-Board : No
►Brightness(cd/m2) : 1100
►Frame Through Hole : No
►Touch Screen : No
Description
WF101JSYAHMNN0 is a 10.1-inch TFT LCD with IPS wide viewing angles. It has 1024×600 dots resolution and 1100 cd/m2 high brightness. The module is built-in with EK79007AD3 + EK73217BCGA driver IC, supporting 4-Lanes MIPI interfaces.
The module's Digital Power Supply Voltage For LCD (VDD) is from 1.71V to 1.89V, with a typical value of 1.8V. It features a glare surface and a 16:9 aspect ratio. This TFT can operate at temperatures from -20 ℃ to +70 ℃, and its storage temperatures are from -30 ℃ to +80 ℃.
The module's Digital Power Supply Voltage For LCD (VDD) is from 1.71V to 1.89V, with a typical value of 1.8V. It features a glare surface and a 16:9 aspect ratio. This TFT can operate at temperatures from -20 ℃ to +70 ℃, and its storage temperatures are from -30 ℃ to +80 ℃.
DRAWING
SPECIFICATIONS
Interface
TFT LCD Module
Pin No. | Symbol | Description |
---|---|---|
1 | VLED+ | LED Anode |
2 | VLED+ | LED Anode |
3 | VGH | Positive power for TFT |
4 | VGL | Negative power for TFT |
5 | UPDN | Gate up or down scan control. UPDN = ”L”, STV2 output vertical start pulse and UD pin output logical “L” to Gate driver. (default) UPDN = ”H”, STV1 output vertical start pulse and UD pin output logical “H” to Gate driver |
6 | SHLR | Source right or left sequence control. SHLR = ”L“, shift left: last data = S1←S2←S3….......←S1536 = first data. SHLR = ”H“, shift right: first data = S1→S2→S3….....→S1536 = last data.(default) |
7 | VLED- | LED Cathode |
8 | VLED- | LED Cathode |
9 | AVDD | Analog power |
10 | GND | Digital ground |
11 | D3P | MIPI data input. |
12 | D3N | MIPI data input. |
13 | GND | Digital ground |
14 | D2P | MIPI data input. |
15 | D2N | MIPI data input. |
16 | GND | Digital ground |
17 | CLKP | MIPI clock input |
18 | CLKN | MIPI clock input |
19 | GND | Digital ground |
20 | D1P | MIPI data input. |
21 | D1N | MIPI data input. |
22 | GND | Digital ground |
23 | D0P | MIPI data input. |
24 | D0N | MIPI data input. |
25 | GND | Digital ground |
26 | STBYB | Standby mode. STBYB = ”H“,normal operation(default) STBYB = ”L”, timing controller, source driver will turn off, all output are GND. |
27 | RESET | Global reset pin. Active Low to enter Reset State. Normally pull high. Connecting with an RC reset circuit for stability. |
28 | VDD (1.8V) | Digital power |
29 | VDD (1.8V) | Digital power |
30 | VCOMI | Common voltage |
General Specifications
Item | Dimension | Unit |
---|---|---|
Size | 10.1 | inch |
Dot Matrix | 1024 RGB x 600 | dots |
Module dimension | 235(W) x 143(H) x 5.05(D) | mm |
Active area | 222.72 (H) x 125.28(V) | mm |
Dot pitch | 0.2175(W) x 0.2088(H) | mm |
LCD type | TFT, Normally Black, Transmissive | |
Interface | 4-Lanes MIPI | |
Driver IC | EK79007AD3 + EK73217BCGA or equivalent | |
Viewing Angle | 85/85/85/85 | |
Aspect Ratio | 16:9 | |
Backlight Type | LED, Normally White | |
Touch Panel | Without Touch Panel | |
Surface | Anti-Glare |
Absolute Maximum Ratings
Item | Symbol | Min | Typ | Max | Unit |
---|---|---|---|---|---|
Operating Temperature | TOP | -20 | - | +70 | ℃ |
Storage Temperature | TST | -30 | - | +80 | ℃ |
Electrical Characteristics
Typical Operation Conditions (At Ta = 25 °C,)
Item | Symbol | Min | Typ | Max | Unit |
---|---|---|---|---|---|
Digital Power Supply Voltage For LCD | VDD | 1.71 | 1.8 | 1.89 | V |
Analog Power Supply Voltage | AVDD | 9.89 | 10.2 | 10.5 | V |
Gate On Power Supply Voltage | VGH | 19.4 | 20 | 20.6 | V |
Gate Off Power Supply Voltage | VGL | -10.3 | -10 | -9.7 | V |
Common Power Supply Voltage | VCOMI | 4 | 4.3 | 4.6 | V |
Search keyword: tft 10.1", 10.1 tft lcd, 10.1" tft lcd, 10.1 inch tft lcd, tft lcd 10.1, 10.1 tft display, 10.1" tft display, 10.1 inch tft display, tft display 10.1", 10.1 tft lcd