Home Productos Pantalla TFT Pantalla TFT de Alto Brillo WF101JSYAHMNN0

10.1" 1024x600 MIPI IPS TFT Display de Legibilidad Bajo Luz Solar

Modelo Nº WF101JSYAHMNN0

►Tamaño : 10.1 pulgada
►Resolución : 1024×600 pontos
►Dirección de la vista : IPS
►Interfaz : 4-Lanes MIPI
►Controlador IC : EK79007AD3 + EK73217BCGA
►Placa de control : No
►Brillo (cd/m2) : 1100
►Agujero del bastidor : No
►Pantalla táctil : Sin panel táctil

DIBUJO

10.1 inch 1024x600 High Brightness MIPI IPS TFT Display - WF101JSYAHMNN0

ESPECIFICACIONES

Función interfaz Pin

TFT LCD Module

Pin No. Símbolo Función
1 VLED+ LED Anode
2 VLED+ LED Anode
3 VGH Positive power for TFT
4 VGL Negative power for TFT
5 UPDN Gate up or down scan control.
UPDN = ”L”, STV2 output vertical start pulse and UD pin output logical “L” to Gate driver. (default)
UPDN = ”H”, STV1 output vertical start pulse and UD pin output logical “H” to Gate driver
6 SHLR Source right or left sequence control.
SHLR = ”L“, shift left: last data = S1←S2←S3….......←S1536 = first data.
SHLR = ”H“, shift right: first data = S1→S2→S3….....→S1536 = last data.(default)
7 VLED- LED Cathode
8 VLED- LED Cathode
9 AVDD Analog power
10 GND Digital ground
11 D3P MIPI data input.
12 D3N MIPI data input.
13 GND Digital ground
14 D2P MIPI data input.
15 D2N MIPI data input.
16 GND Digital ground
17 CLKP MIPI clock input
18 CLKN MIPI clock input
19 GND Digital ground
20 D1P MIPI data input.
21 D1N MIPI data input.
22 GND Digital ground
23 D0P MIPI data input.
24 D0N MIPI data input.
25 GND Digital ground
26 STBYB Standby mode.
STBYB = ”H“,normal operation(default)
STBYB = ”L”, timing controller, source driver will turn off, all output are GND.
27 RESET Global reset pin. Active Low to enter Reset State. Normally pull high. Connecting with an RC reset circuit for stability.
28 VDD (1.8V) Digital power
29 VDD (1.8V) Digital power
30 VCOMI Common voltage

Especificaciones generales

Elemento Dimensión Unidad
Tamaño 10.1 pulgada
Matriz de puntos 1024 RGB x 600 dots
Dimensión del módulo 235(W) x 143(H) x 5.05(D) mm
zona activa 222.72 (H) x 125.28(V) mm
Distancia entre puntos 0.2175(W) x 0.2088(H) mm
Tipo de LCD TFT, Negro, Transmisivo
Interfaz 4-Lanes MIPI
Controlador IC EK79007AD3 + EK73217BCGA o equivalente
Dirección de la vista 85/85/85/85
Relación de aspecto 16:9
Tipo de retroiluminación LED, Blanco
Con o sin panel táctil Sin panel táctil
Superficie Pantalla antirreflectante

Valores nominales máximos absolutos

Elemento Símbolo Valor mín. Valor típico Valor máx. Unidad
Temperatura de funcionamiento TOP -20 70
Temperatura de almacenamiento TST -20 70

Características electrónicas

Typical Operation Conditions (At Ta = 25 °C,)

Elemento Símbolo Valor mín. Valor típico Valor máx. Unidad
Digital Power Supply Voltage For LCD VDD  1.71 1.8 1.89 V
Analog Power Supply Voltage AVDD  9.89 10.2 10.5 V
Gate On Power Supply Voltage VGH  19.4 20 20.6 V
Gate Off Power Supply Voltage VGL  -10.3 -10 -9.7 V
Common Power Supply Voltage VCOMI 4 4.3 4.6 V
go top
close