Home Products TFT Display IPS TFT LCD WF70A9TWAGDNT0

7-inch IPS TFT LCD Display, 800x480, Wide Temperature, with Resistive Touch

Model No. WF70A9TWAGDNT0

►Size : 7 inch
►Resolution : 800x480 dots
►View Direction : 80/80/80/80 (IPS)
►Interface : RGB
►Driver IC:HX8249-A + HX8678-C
►Control-Board : No
►Brightness(cd/m²) : 350
►Frame Through Hole : No
►Touch Screen : Resistive Touch Panel (RTP)
►Operating Temperature : -30~+80 °C (Wide Temperature)

Description

WF70A9TWAGDNT0 is a 7-inch, 800×480 wide-temperature IPS TFT-LCD display with a resistive touch panel (RTP). It integrates HX8249-A and HX8678-C driver ICs and supports a 24-bit RGB interface.

The IPS panel offers wide viewing angles: 80° (left), 80° (right), 80° (up), and 80° (down) (typical values). It features a 1000:1 contrast ratio, 350 cd/m² typical brightness, and an anti-glare surface. The active area has a 15:9 aspect ratio. For applications requiring higher brightness, consider the WF70A9SWAGDNT0 model.

The display operates with a supply voltage (VCC) ranging from 2.7V to 3.6V, with a typical value of 3.3V. It supports a wide operating temperature range from -30℃ to +80℃ and can be stored in temperatures from -30℃ to +80℃.

DRAWING

7-inch IPS TFT LCD Display, 800x480, Wide Temperature, with Resistive Touch - WF70A9TWAGDNT0

SPECIFICATIONS

General Specifications

Item Dimension Unit
Size 7.0 inch
Dot Matrix 800 x RGB x 480(TFT) dots
Module dimension 165.8 (W) x 106.61 (H) x 8.0(D) mm
Active area 152.40 x 91.44 mm
Pixel pitch 0.1905 x 0.1905 mm
LCD type TFT, Normally Black, Transmissive
View Direction 80/80/80/80
TFT Interface 24-bit RGB
TFT Driver IC HX8249-A + HX8678-C or Equivalent
Aspect Ratio 15:9
Backlight Type LED, Normally White
Touch Panel Resistive Touch Panel
Surface Anti-Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -30 +80
Storage Temperature TST -30 +80

Electrical Characteristics

Operating conditions

Item Symbol Min Typ Max Unit
Supply Voltage Vcc 2.7 3.3 3.6 V
Current of power supply Icc 101 150 mA
 

LED driving conditions

Parameter Symbol Min Typ Max Unit
LED current 360 mA
LED voltage VLED+ 8.1 9.3 10.2 V
LED Life Time 40000 Hr

Interface

1.LCM PIN Definition

Pin Symbol Function
1-4 NC No connection
5 GND Power Ground
6 NC No connection
7 VCC Power voltage
8 NC(MODE) No connection, Input timing is Sync mode.
The pin is already connected to VCC internally.
9 DE Data enable signal for TTL mode.
10 VS Vertical sync input
11 HS Horizontal sync input
12 B7 Blue data(MSB)
13 B6 Blue data
14 B5 Blue data
15 B4 Blue data
16 B3 Blue data
17 B2 Blue data
18 B1 Blue data
19 B0 Blue data(LSB)
20 G7 Green data(MSB)
21 G6 Green data
22 G5 Green data
23 G4 Green data
24 G3 Green data
25 G2 Green data
26 G1 Green data
27 G0 Green data(LSB)
28 R7 Red data(MSB)
29 R6 Red data
30 R5 Red data
31 R4 Red data
32 R3 Red data
33 R2 Red data
34 R1 Red data
35 R0 Red data (LSB)
36 GND Power Ground
37 DCLK Sample clock
38 GND Power Ground
39 NC(L/R) No connection, Horizontal scan direction (Left to right).
The pin is already connected to VCC internally.
40 NC(U/D) No connection, Vertical scan direction (Top to bottom).
The pin is already connected to VCC internally.
41 NC No connection
42 NC No connection
43 NC No connection
44 RESET Reset pin. The chip is in reset state when RESETB=0.
45 NC No connection
46 NC No connection
47 STBYB STBYB Standby mode setting pin. The chip is in standby mode when STBYB=0.
48 GND Power Ground
49 NC No connection
50 NC No connection
 

2.Backlight PIN Definition

Pin Symbol Description
1 VLED+ Red, LED_ Anode
2 VLED- Black, LED_ Cathode
go top
close

We value your privacy

By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.

We value your privacy

Winstar and certain third parties use cookies on www.winstar.com.tw. The details regarding the types of
cookies, their purpose and the third parties involved are described below and in our Cookie Policy.
Please click on “Allow All” to consent to our usage of cookies in order to have the best possible
experience on our websites. You can also set your preferences or reject cookies (except for strictly
necessary cookies).

Manage Consent Preferences

Always Active
Essential Cookies

These cookies are essential in order to enable you to move around the website and use its
features, such as setting your privacy preferences, logging in or filling in forms.

Analytics Cookies

Also known as “statistics cookies,” these cookies collect information about how you use a website, like which pages you visited and which links you clicked on. See Detail