Model No. WF101JSYAHDNB0
►Size : 10.1 inch
►Resolution : 1024×600 dots
►View Direction : IPS
►Interface : RGB
►Driver IC : EK79001HN-S + EK73215BCGA
►Control-Board : No
►Brightness(cd/m2) : 900
►Frame Through Hole : No
►Touch Screen : Projected Capacitive Touch Panel (PCAP)
►Detect Point : 5 Fingers
The 10.1-inch 1024x600 High Brightness IPS TFT LCD Module (Model: WF101JSYAHDNB0) is equipped with a Projected Capacitive Touch Panel (PCAP) and is designed for various industrial applications. This module combines excellent performance and reliability, providing clear and vibrant display effects in a range of environments. The model features built-in EK79001HN-S and EK73215BCGA TFT driver ICs, supports a 24-bit RGB interface, and utilizes an ILI2511 driver IC for the PCAP, supporting USB interface (I2C available) and 5-point touch functionality.
The module's display has a diagonal size of 10.1 inches with a resolution of 1024x600 pixels, ensuring that every detail is clearly presented. Its overall dimensions are 235 × 143 × 8.78 mm, making it convenient for installation in various devices. The active display area measures 222.72 × 125.28 mm, delivering excellent display quality for users to fully appreciate the detail of the screen.
This TFT LCD display module utilizes IPS panel technology, featuring wide viewing angles of up to 85 degrees, ensuring that colors remain true and consistent from any angle. Brightness can reach 900 cd/m² with a contrast ratio of 800:1, allowing for good readability even in bright environments, making it particularly suitable for touch-enabled entrance devices, elevator displays, smart home applications, medical equipment, and more.
The WF101J series supports a variety of interfaces, including LVDS, MIPI, RGB, and HDMI connector (DVI signal), ensuring seamless integration into different systems. Whether you need a standard display or a touch-enabled module, the series offers flexible solutions tailored to your application.
Additionally, the operating temperature range of this display module is -20℃ to +70℃, with a storage temperature range of -30℃ to +80℃, making it suitable for stable operation under various conditions. The power supply requirement is a digital voltage of 3.0~3.6V, ensuring a balance between energy efficiency and performance. This model series also offers non-touch options, making it ideal for applications requiring basic display functionality.
| Item | Dimension | Unit |
|---|---|---|
| Size | 10.1 | inch |
| Dot Matrix | 1024 × RGB × 600 | dots |
| Module dimension | 235(W) × 143(H) × 8.78(D) | mm |
| Active area | 222.72 (H) × 125.28(V) | mm |
| Pixel pitch | 0.2175(W) × 0.2088(H) | mm |
| LCD type | TFT, Normally Black, Transmissive | |
| Interface | 24 bit RGB | |
| Driver IC | EK79001HN-S+EK73215BCGA or equivalent | |
| Viewing Angle | 85/85/85/85 (IPS) | |
| Aspect Ratio | 16:9 | |
| Backlight Type | LED, Normally White | |
| PCAP IC | ILI2511 or equivalent | |
| PCAP Interface | USB (I2C available) | |
| PCAP FW Version: | V6.0.0.0.62.90.1.2 | |
| PCAP Resolution | 16384*16384 | |
| Touch Panel | Projected Capacitive Touch Panel (PCAP) | |
| Surface | Glare | |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -20 | － | +70 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Digital Power Supply Voltage For LCD | VDD | 3 | 3.3 | 3.6 | V |
| Analog Power Supply Voltage | AVDD | 9.89 | 10.2 | 10.5 | V |
| Gate On Power Supply Voltage | VGH | 19.4 | 20.0 | 20.6 | V |
| Gate Off Power Supply Voltage | VGL | -10.3 | -10.0 | -9.7 | V |
| Common Power Supply Voltage | VCOM | 4.0 | 4.3 | 4.6 | V |
| Input logic high voltage | VIH | 0.7 Vcc | - | Vcc | V |
| Input logic low voltage | VIL | 0 | - | 0.3 Vcc | V |
| Supply PCAP | VDDT | 3.0 | 3.3 | 3.6 | V |
| IVDDT | - | 90.5 | 115 | V | |
| USB_VDD 5V | 4.4 | 5.0 | 5.5 | V | |
| I VDD 5V | - | 97.8 | 120 | mA |
| Pin No. | Symbol | Function |
|---|---|---|
| 1 | VLED+ | LED Anode |
| 2 | VLED+ | LED Anode |
| 3 | VLED- | LED Cathode |
| 4 | VLED- | LED Cathode |
| 5 | GND | Ground |
| 6 | VCOM | Common voltage |
| 7 | VCC | Power for Digital Circuit |
| 8 | MODE | DE/SYNC mode select |
| 9 | DE | Data Input Enable (DEN) |
| 10 | VS | Vertical Sync Input (VSD) |
| 11 | HS | Horizontal Sync Input (HSD) |
| 12 | B7 | Blue data(MSB) |
| 13 | B6 | Blue data |
| 14 | B5 | Blue data |
| 15 | B4 | Blue data |
| 16 | B3 | Blue data |
| 17 | B2 | Blue data |
| 18 | B1 | Blue data |
| 19 | B0 | Blue data(LSB) |
| 20 | G7 | Green data(MSB) |
| 21 | G6 | Green data |
| 22 | G5 | Green data |
| 23 | G4 | Green data |
| 24 | G3 | Green data |
| 25 | G2 | Green data |
| 26 | G1 | Green data |
| 27 | G0 | Green data(LSB) |
| 28 | R7 | Red data(MSB) |
| 29 | R6 | Red data |
| 30 | R5 | Red data |
| 31 | R4 | Red data |
| 32 | R3 | Red data |
| 33 | R2 | Red data |
| 34 | R1 | Red data |
| 35 | R0 | Red data(LSB) |
| 36 | GND | Power Ground |
| 37 | DCLK | Sample clock (CLK) |
| 38 | GND | Power Ground |
| 39 | L/R | Left / right selection |
| 40 | U/D | Up/down selection |
| 41 | VGH | Gate ON Voltage |
| 42 | VGL | Gate OFF Voltage |
| 43 | AVDD | Power for Analog Circuit |
| 44 | RESET | Global reset pin. |
| 45 | NC(BIST) | No connection |
| 46 | VCOM | Common Voltage |
| 47 | DITHB | Dithering function |
| 48 | GND | Power Ground |
| 49 | NC(FGND) | No connection |
| 50 | NC(FGND) | No connection |
| Pin | Symbol | Function |
|---|---|---|
| 1 | USB_VSS | System ground |
| 2 | USB_VDD 5V | Power supply |
| 3 | USB_D+ | Data + |
| 4 | USB_D- | Data - |
| 5 | VSS | System ground |
| 6 | SDA | I2C data input and output |
| 7 | SCL | I2C clock input |
| 8 | RST | External Reset, Low is active |
| 9 | INT | External interrupt to the host |
| 10 | VDDT 3.3 | Power supply |
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.