WF70A2TIFGDHGV is a 7-inch TFT-LCD module that supports HDMI (DVI only) signal input and features a Projected Capacitive Touch Panel (PCAP) with a WVGA resolution of 800x480. The module comes with a control board that supports the HDMI signal interface and includes a 40-pin GPIO connector on board, designed for easy integration with Raspberry Pi systems. This display includes a Capacitive Touch Screen overlay with a USB interface on the TFT panel. We offer an optional connector (P/N WWHDMI-00#) and USB cable (P/N OTP1XXXXXXXXXXXX0155) that customers can use to connect the WF70A2TIFGDHGV module directly to their Raspberry Pi. Please note, the WF70A2TIFGDHGV does not include an HDMI connector or USB cable by default.

WF70A2TIFGDHGV is equipped with a TFP401 Controller IC to convert signals and support the HDMI (DVI only) signal interface. The PCAP (CTP) IC is the ILI2130, which supports a USB interface. The typical supply voltage for the LCM (VDD) is 5V. The display features anti-glare surface glass, a 12 o'clock viewing direction, and gray-scale inversion at 6 o'clock.

Part No. WWHDMI-00# (Optional component)
▪ Supports HDMI connector (Only DVI Signal) for TFT module and Raspberry Pi.

WF70A2TIFGDHGV#: with a 40-pin header connector on board, supports up to Raspberry Pi 3B+ (including Pi 4B) version. If customers choose the Raspberry Pi 4 version, please note the interface is Micro HDMI; customers need to use the Micro HDMI to HDMI cable for Winstar this series products.
WF70A2TIFGDHG0#: without a connector on board (does not support Raspberry Pi).