Model No. WF70C4TIBGDAN0
►Size : 7 inch
►Resolution : 800 x 480 pixels
►View Direction : 12H
►Interface : MCU
►Controller IC：SSD1963
►Control Board : Yes
►Brightness(cd/m2): 500
►Frame Through Hole : Yes
►Touch Panel : No
WF70C4TIBGDAN0 is a 7-inch TFT LCD display with an 800×480 resolution and an integrated SSD1963 controller board. This model features a 20-pin MCU interface and supports MCU 8080 8-/16-bit and 6800 interface modes for flexible system integration.
The display provides a typical brightness of 500 cd/m² and a contrast ratio of 1000:1, with an anti-glare surface for improved readability. The module dimension is 181.2 × 105.4 × 9.7 mm, with an active area of 152.4 × 91.44 mm.
The controller board integrates key driving and backlight control functions, reducing external component requirements and simplifying overall system design. The module operates from -20°C to +70°C and can be stored from -30°C to +80°C.
| Item | Dimension | Unit |
|---|---|---|
| Size | 7.0 | inch |
| Dot Matrix | 800 × RGB × 480(TFT) | dots |
| Module dimension | 181.2(W) x 105.40(H) x 9.7(D) | mm |
| Active area | 152.4 x 91.44 | mm |
| Pixel pitch | 0.1905x 0.1905 | mm |
| LCD type | TFT, Normally White, Transmissive | |
| View Direction | 12 o'clock | |
| Gray Scale Inversion Direction | 6 o'clock | |
| Aspect Ratio | 16:9 | |
| Backlight Type | LED,Normally White | |
| Controller IC | SSD1963 | |
| Interface | Digital 8080 family MPU( 8bit Parallel ) | |
| Touch Panel | Without Touch Panel | |
| Surface | Anti-Glare | |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -20 | － | +70 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
| Item | Symbol | Condition | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage For LCM | VDD | - | 3.0 | 3.3 | 3.6 | V |
| Supply Current For LCM | IDD | Black Pattern | － | 160 | 240 | mA |
| Parameter | Symbol | Min. | Typ. | Max. | Unit |
|---|---|---|---|---|---|
| LED current | - | - | 160 | 200 | mA |
| Power Consumption | VBL+=9.8V | - | 1568 | - | mW |
| LED voltage | VBL+ | 8.4 | 9.8 | 11 | V |
| LED Life Time | - | 50,000 | - | - | Hr |
| Pin | Symbol | Description |
|---|---|---|
| 1 | GND | Power Ground |
| 2 | VDD | Power Supply : +3.3V |
| 3 | NC | No connect |
| 4 | D/C | Data/Command select |
| 5 | WR | Write strobe signal |
| 6 | RD | Read strobe signal |
| 7 | DB0 | Data bus |
| 8 | DB1 | Data bus |
| 9 | DB2 | Data bus |
| 10 | DB3 | Data bus |
| 11 | DB4 | Data bus |
| 12 | DB5 | Data bus |
| 13 | DB6 | Data bus |
| 14 | DB7 | Data bus |
| 15 | CS | Chip select |
| 16 | NC | No connect |
| 17 | NC | No connect |
| 18 | RST | Hardware reset |
| 19 | NC | No connect |
| 20 | NC | No connect |
| Pin No. | Symbol | Description |
|---|---|---|
| 1 | VLED+ | Red, LED_ Anode |
| 2 | VLED- | White, LED_ Cathode |
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.