На главную страницу Продукция Одноплатные компьютеры WUABAB120V0000N0NX00 / WUABLB120V0000N0NX00

Linux / Android Одноплатные компьютеры для встраиваемых систем

№ модели WUABAB120V0000N0NX00 / WUABLB120V0000N0NX00

►WUABAB Series : Android Operating Systems
►WUABLB Series : Linux Yocto Operating Systems
►Without WIFI

Одноплатные компьютеры для встраиваемых систем
►NXP Cortex-A9 Dual lite @ 1.0GHz
►On-board DDR3 Up to 1GB & 8GB eMMC NAND Flash
►Поддержка LVDS дисплеев высокого разрешения, RGB интерфейс & HDMI(1920*1080)
►Full HD Decoder, 2D/3D, OpenGL ES2.0 or up
►Низкое потребление энергии
►Поддержка Android 4.4.2 /Linux yocto Daisy 1.6 (QT Included)
►Поддержка TFT модулей от 5”~12.1” (Поддержка RGB & LVDS)

DRAWING

Embedded Single Board Computer, Single Board Computers, Android Single Board Computer, Linux Single Board Computer - Winstar

Техническое описание

Одноплатные компьютеры для встраиваемых систем

Processor System CPU iMX6 DL - Dual core 1.0GHz (Dual core up to 1GHz per core)
Memory Memory Onboard DDR3L 1GB x64 bit
  Mass storage On-board eMMC drive, up to 8GB
Video LVDS 24 bit LVDS (1024*600、1280*800)
  RGB 24-bits TTL with DE+ H/V sync (800*480)
  HDMI V1.4 (1920*1080)
Graphic Graphic engine Dedicated 2D Hardware accelerator
    Dedicated 3D Hardware accelerator (Supports OpenGL ES2.0 3D)
  H/W Video codec Support MPEG 1/2/4, H.264 Hardware Decoder.
  Display Support 2 types independent display with iMX6DL and i.MX6D/Q
Network Ethernet 1 GbE + IEEE1588 with RJ45 slot
  WIFI/BT BLE 4.0 (internal USB for option WIFI Module, Optional Parts)
USB USB 2 Standard USB 2.0 type A ; 1 x USB 2.0 OTG
    2*USB2.0 with pin header
Audio Audio WM8903 Audio codec with 3.5 mm stereo jack
    Mic in, Line out internal pin header
I/O Serial port 4 x RS232 (3 x ePH connector, 1x ePHD for console,) ; 
    1 x RS485 (1 x ePH connector)
  IIC 1 (Client, for PCAP use)
  GPIO 32-pin 3.3V TTL Level GPIOs / 2-pin TTL PWM output
Touch Panel Resistive 4-wire Resistive type (onboard)
  Capacitive CTP is driven IIC interface
Clock RTC RTC Circuitry for low power consumption with Battery on-board
Expansion SD Socket 1 *μSD Slot (support up to SDXC)
Power Voltage DC9V ~ DC24V±10%
  Consumption 2.5W
Environment Temperature -20℃ ~ 70℃ (Operating)
    -30℃ ~ 80℃ (Storage)
Operating System   Android 4.4.2 or Linux Yocto Daisy 1.6
Dimension   130mm * 95mm * 20mm
Certification   CE/FCC

Block Diagram

The diagram shows the connection of IC components and devices.

2.2	Block Diagram

Position of Connector and Pin header

Position on Connector and Pin Header
Connector No. Description Connector No. Description
J2(J8) DC Power Jack J15 RS485 port
J5 Micro SD Card Slot J11 Audio input interface
J6 USB port in Type A connector J12 Audio output interface
J7 Ethernet in RJ45 Slot J19 RTP interface
J22 GPIO port1 J4 3.5mm Earphone+ Micro phone
J24 GPIO port2 J1 USB OTG interface
J9, J20 USB port in pin header J25 I2C interface for CTP(PCAP)
J16, J18,J26 RS232 port J14 RGB LCD interfaces
J23 RS232 for Console J3 HDMI (1920*1080)
J10 LVDS LCD interfaces    
SW2 Display selection switch    
go top
close