Model No. WF70A7TIAHLNB0
►1024x600 Display
►Size : 7”
►View Direction : 12H
►Interface : LVDS
►Driver IC：EK79001HE + EK73215BCGA
►Control-Board : No
►Brightness(cd/m2): 450
►Frame Through Hole : No
►Touch Screen : Projected capacitive touch screen (PCAP)
►Touch Points: 10
►PCAP Interface : USB (I2C available)
WF70A7TIAHLNB0 is a 7-inch TFT LCD display with a 1024×600 resolution and a projected capacitive touch panel (PCAP). This model supports an LVDS interface.
The capacitive touch panel is driven by an ILI2511 controller IC, supporting USB interface (I2C available) and 10-point touch. The module dimension is 202.0 × 135.5 × 8.73 mm, with an active area of 154.2144 × 85.92 mm.
The display provides a typical brightness of 450 cd/m² and uses a glare surface panel, with a 12 o’clock viewing direction and 6 o’clock grayscale inversion direction. The logic supply voltage (DVDD) ranges from 3.0V to 3.6V. The module operates from -20°C to +70°C and can be stored from -30°C to +80°C.
| Item | Dimension | Unit |
|---|---|---|
| Size | 7.0 | inch |
| Dot Matrix | 1024 × RGB × 600(TFT) | dots |
| Module dimension | 202.0 (W) × 135.5 (H) × 8.73 (D) | mm |
| Active area | 154.2144 × 85.92 | mm |
| Dot pitch | 0.1506× 0.1432 | mm |
| LCD type | TFT, Normally White, Transmissive | |
| View Direction | 12 o'clock | |
| Gray Scale Inversion Direction | 6 o'clock | |
| Aspect Ratio | 16:9 | |
| Control IC | -- | |
| TFT Driver IC | EK79001HE + EK73215BCGA | |
| TFT Interface | LVDS | |
| Backlight Type | LED, Normally White | |
| Touch Panel | PCAP | |
| PCAP IC | ILI2511 or equivalent | |
| PCAP Interface | USB (I2C available) | |
| PCAP FW Version | V 6. 0. 0. 0. 7.65. 0. 1 | |
| Surface | Glare | |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -20 | － | +70 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
| Item | Symbol | Values | Unit | ||
|---|---|---|---|---|---|
| Min | Typ | Max | |||
| Power voltage | DVDD | 3.0 | 3.3 | 3.6 | V |
| AVDD | 9.4 | 9.6 | 9.8 | V | |
| VGH | 17 | 18 | 19 | V | |
| VGL | -6.6 | -6.0 | -5.4 | V | |
| Supply Voltage For Touch Logic |
VDDT | 4.4 | 5.0 | 5.5 | V |
| Input signal voltage | VCOM | 3.1 | 3.3 | 3.6 | V |
| Input logic high voltage | VIH | 0.7 DVDD | - | DVDD | V |
| Input logic low voltage | VIL | 0 | - | 0.3 DVDD | V |
| Item | Symbol | Values | Unit | ||
|---|---|---|---|---|---|
| Min. | Typ. | Max. | |||
| Current for Driver | IGH | - | 0.2 | 1.0 | mA |
| IGL | - | 0.2 | 1.0 | mA | |
| IDVDD | - | 4.0 | 10 | mA | |
| IAVDD | - | 20 | 50 | mA | |
| Item | Symbol | Values | Unit | ||
|---|---|---|---|---|---|
| Min. | Typ. | Max. | |||
| Voltage for LED backlight | VL | 8.4 | 9.8 | 10.8 | V |
| Current for LED backlight | IL | -- | 300 | -- | mA |
| LED life time | - | - | 50,000 | - | Hr |
| Pin No. | Symbol | I/O | Function |
|---|---|---|---|
| 1 | VCOM | P | Common Voltage |
| 2 | VDD | P | Digital circuit |
| 3 | VDD | P | Digital circuit |
| 4 | NC | --- | No connection |
| 5 | Reset | I | Global reset pin |
| 6 | STBYB | I | Standby mode, Normally pulled high STBYB = “1”, normal operation STBYB = “0”, timing controller, source driver will turn off, all output are High-Z |
| 7 | GND | P | Ground |
| 8 | RXIN0- | I | Negative LVDS differential data input |
| 9 | RXIN0+ | I | Positive LVDS differential data input |
| 10 | GND | P | Ground |
| 11 | RXIN1- | I | Negative LVDS differential data input |
| 12 | RXIN1+ | I | Positive LVDS differential data input |
| 13 | GND | P | Ground |
| 14 | RXIN2- | I | Negative LVDS differential data input |
| 15 | RXIN2+ | I | Positive LVDS differential data input |
| 16 | GND | P | Ground |
| 17 | RXCLKIN- | I | Negative LVDS differential clock input |
| 18 | RXCLKIN+ | I | Positive LVDS differential clock input |
| 19 | GND | P | Ground |
| 20 | RXIN3- | I | Negative LVDS differential data input |
| 21 | RXIN3+ | I | Positive LVDS differential data input |
| 22 | GND | P | Ground |
| 23 | NC | --- | No connection |
| 24 | NC | --- | No connection |
| 25 | GND | P | Ground |
| 26 | NC | --- | No connection |
| 27 | DIMO | O | Backlight CABC controller signal output |
| 28 | SELB | I | 6bit/8bit mode select H:6bit / L:8bit |
| 29 | AVDD | P | Power for Analog Circuit |
| 30 | GND | P | Ground |
| 31 | LED- | P | LED Cathode |
| 32 | LED- | P | LED Cathode |
| 33 | L/R | I | Horizontal inversion |
| 34 | U/D | I | Vertical inversion |
| 35 | VGL | P | Negative power for TFT |
| 36 | GND | P | Ground |
| 37 | GND | P | Ground |
| 38 | VGH | P | Positive power for TFT |
| 39 | LED+ | P | LED Anode |
| 40 | LED+ | P | LED Anode |
| Pin | Symbol | Function |
|---|---|---|
| 1 | USB_VSS | System ground |
| 2 | USB_VDD 5V | Power supply |
| 3 | USB_D+ | Data + |
| 4 | USB_D- | Data - |
| 5 | VSS | System ground |
| 6 | SDA | I2C data input and output |
| 7 | SCL | I2C clock input |
| 8 | RST | External Reset, Low is active |
| 9 | INT | External interrupt to the host |
| 10 | VDDT 3.3 | Power supply |
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.
