1280x800, 12.1 inch LVDS IPS TFT LCD Display
Model No. WF121BTXAPLNNA
►Size : 12.1 inch
►1280x800 Display
►View Direction : IPS
►Interface : LVDS
►Driver IC : Fiti EK77526AHI205A
►Control-Board : No
►Brightness (cd/m²) : 400
►Frame Through Hole : No
►Touch Screen : No
►Operating Temperature : -20~+70°C
Description
WF121BTXAPLNNA is a 12.1 inch IPS TFT display. This IPS TFT display has a resolution of 1280x800 pixels and a brightness of 400 nits (typical value. It supports LVDS interfaces. The power supply voltage (VCC) for this TFT-LCD is from 3.0V to 3.6V, and the typical value is 3.3V.
The WF121BTXAPLNNA module can operate at temperatures from -20°C to +70°C; its storage temperatures range from -20°C to +70°C.
DRAWING
SPECIFICATIONS
Interface Pin Function
LCM PIN DefinitionPin No. | Symbol | Description |
---|---|---|
1 | 12V | LED power |
2 | 12V | LED power |
3 | 12V | LED power |
4 | 12V | LED power |
5 | ENLED | Enable pin |
6 | Dimming | Backlight Adjust |
7 | GND | Ground |
8 | GND | Ground |
9 | VCC | Power supply:+3.3V |
10 | VCC | Power supply:+3.3V |
11 | GND | Ground |
12 | GND | Ground |
13 | RX0- | Negative transmission data of pixel 0 |
14 | RX0+ | Positive transmission data of pixel 0 |
15 | GND | Ground |
16 | RX1- | Negative transmission data of pixel 1 |
17 | RX1+ | Positive transmission data of pixel 1 |
18 | GND | Ground |
19 | RX2- | Negative transmission data of pixel 2 |
20 | RX2+ | Positive transmission data of pixel 2 |
21 | GND | Ground |
22 | RXCLK- | Negative of clock |
23 | RXCLK+ | Positive of clock |
24 | GND | Ground |
25 | RX3- | Negative transmission data of pixel 3 |
26 | RX3+ | Positive transmission data of pixel 3 |
27 | GND | Ground |
28 | SEL6/8 | LVDS 6/8 bit select function control |
Low or NC → 6 bit Input Mode | ||
High → 8bit Input Mode | ||
29 | GND | Ground |
30 | GND | Ground |
General Specifications
Item | Dimension | Unit |
---|---|---|
Dot Matrix | 1280 x R.G.B. x 800 | dots |
Module dimension | 278.0*184.0*10.0 | mm |
Active Area (AA) | 261.12*163.2 | mm |
Pixel pitch | 0.204 x 0.204 | mm |
LCD type | TFT, Normally Black, Transmissive | |
Surface Treatment | AG type, 3H hard coating | |
Backlight Type | LED ,Normally White | |
TFT Interface | LVDS | |
Aspect Ratio | 16:9 | |
Touch Panel | Without Touch Panel |
Absolute Maximum Ratings
Item | Symbol | Min | Typ | Max | Unit |
---|---|---|---|---|---|
Operating Temperature | TOP | -20 | - | +70 | ℃ |
Storage Temperature | TST | -20 | - | +70 | ℃ |
Electrical Characteristics
LCD ELETRONICS SPECIFICATIONParameter | Symbol | Value | Unit | |||
---|---|---|---|---|---|---|
Min | Typ | Max | ||||
Power Supply Voltage | VCC | 3.0 | 3.3 | 3.6 | V | |
Permissive Ripple Voltage | VRP | - | 50 | - | mV | |
Rush Current | IRUSH | 1.5 | A | |||
Initial Stage Current | IIS | - | - | 1.0 | A | |
Power Supply Current | White | - - |
- | 530 | 630 | mA |
Black | - | 350 | 420 | mA | ||
LVDS Differential Input High |
VTH(LVDS) | +100 | - | - | mV | |
LVDS Differential Input Low |
VTL(LVDS) | - | - | -100 | mV | |
LVDS Common Mode Voltage | VCM | 1.125 | - | 1.375 | V | |
LVDS Differential Input Voltage | |VID| | 100 | - | 600 | mV | |
Terminating Resistor | RT | - | 100 | - | Ohm |