WF50BTIFGDHGV is a 5 inch for HDMI signal TFT-LCD module with Projected Capacitive Touch Panel (PCAP); it’s made of resolution WVGA 800x480 dots. This WF50BTIFGDHGV comes with a control board which supports HDMI signal interface and a 40-pin GPIO connector on board; it is designed to make Raspberry Pi usage become easily. This display has a USB interface Capacitive Touch Screen overlay on TFT panel. We designed a connector (P/N WWHDMI-00#) and USB cable (P/N OTP1XXXXXXXXXXXX0155) for option, the customers can use it to connect WF50BTIFGDHGV module with your Raspberry Pi directly.  If customers do not require a 40-pin header connector on board, please choose WF50BTIFGDHG0.

This display is small and compact, you can simply to use it with your Raspberry Pi ( it supports Pi 1 to 3), and also you can use this display with any embedded system which supports HDMI signal output. The 5" display is 800x480 resolution, which is just enough to run most software, but still small enough that it can be used in portable or embedded projects without the bulk. Please notice, this product WF50BTIFGDHGV does not include any HDMI connector or USB cable.

Part No. WWHDMI-00# (Optional component)
▪Support HDMI connector (Only DVI Signal) for TFT module and Raspberry Pi

WF50BTIFGDHGV#: with a 40-pin header connector on board, supports up to Raspberry Pi 3B+ (contain Pi 4B) version.  If customers choose to use Raspberry Pi 4 version for your project, please note the interface is Micro HDMI; customers need to use the Micro HDMI to HDMI cable.
WF50BTIFGDHGX#: with a 40-pin header connector on board, supports ahead of Raspberry Pi 3 version only.
WF50BTIFGDHG0#: without connector on board (do not support Raspberry Pi).