5" 720x1280 IPS, MIPI DSI, High Brightness TFT LCD
Model No. WF50DSYA3MNN0
►Size : 5 inch
►Resolution : 720x1280 dots
►View Direction : IPS
►Interface : MIPI DSI
►Driver IC：ILI9881C
►Control-Board : No
►Brightness(cd/m2) : 1100
►Frame Through Hole : No
►Touch Screen : No
Description
WF50DSYA3MNN0 is a High Brightness 5 inch IPS TFT-LCD module with resolution of 720x1280 pixels. This TFT-LCD is featured with IPS panel which is having the advantages of wider viewing angle of Left:80 / Right:80 / Up:80 / Down:80 degree (typical) and high brightness 1100 nits (typical value).
This WF50D 5 inch module is a portrait mode IPS TFT-LCD; this module is built in with ILI9881C driver IC; it supports MIPI interface (Mobile Industry Processor Interface) DSI (Display Serial Interface) which is having the characteristics of High Speed Data Transmission and High Speed Clock Transmission. This TFT display featured with Glare surface panel; aspect ratio 16:9, it can be operating at temperatures from -20℃ to +70℃; its storage temperatures range from -30℃ to +80℃.
DRAWING
SPECIFICATIONS
Interface
LCM PIN Definition
| Pin | Symbol | Function |
|---|---|---|
| 1-9 | NC | No connection |
| 10-11 | VCI | Power supply for analog circuits. Connect to an external power supply of 2.5V to 3.6V |
| 12-13 | NC | No connection |
| 14 | RESET | The external reset input Initializes the chip with a low input. Be sure to execute a power-on reset after supplying power. Fix to VDDI level when not in use. |
| 15 | TE | Tearing effect output pin. Leave the pin open when not in use. |
| 16 | NC | No connection |
| 17-18 | GND | Power ground |
| 19-20 | IOVCC | Power supply for analog circuits. Connect to an external power supply of 1.65V to 3.6V |
| 21 | GND | Power ground |
| 22 | D3P | MIPI DSI differential data pair. (Data lane 3) |
| 23 | D3N | |
| 24 | GND | Power ground |
| 25 | D2P | MIPI DSI differential data pair. (Data lane 2) |
| 26 | D2N | |
| 27 | GND | Power ground |
| 28 | CLKP | MIPI DSI differential clock pair |
| 29 | CLKN | |
| 30 | GND | Power ground |
| 31 | D1P | MIPI DSI differential data pair. (Data lane 1) |
| 32 | D1N | |
| 33 | GND | Power ground |
| 34 | D0P | MIPI DSI differential data pair. (Data lane 0) |
| 35 | D0N | |
| 36-37 | GND | Power ground |
| 38 | LED+ | Power for LED backlight anode |
| 39 | LED- | Power for LED backlight cathode |
| 40 | NC | No connection |
General Specifications
| Item | Dimension | Unit |
|---|---|---|
| Size | 5.0 | inch |
| Dot Matrix | 720× 3(RGB) ×1280 | dots |
| Module dimension | 68.4 (W) × 122.7 (H) ×4.15 | mm |
| Active area | 62.1 (W) × 110.4 (H) | mm |
| Dot pitch | 0.08625(W) ×0.08625(H) | mm |
| LCD type | TFT, Normally Black, Transmissive | |
| Viewing angle | 80/80/80/80 | |
| TFT Driver IC | ILI9881C or Equivalent | |
| TFT Interface | MIPI | |
| Aspect Ratio | 16:9 | |
| Backlight Type | LED, Normally White | |
| Touch Panel | Without Touch Panel | |
| Surface | Glare | |
Absolute Maximum Ratings
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -20 | － | +70 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
Electrical Characteristics
Typical Operation Conditions
| Item | Symbol | Values | Unit | ||
|---|---|---|---|---|---|
| Min | Typ | Max | |||
| Power supply for analog circuit | VCI | 2.5 | 3.3 | 3.6 | V |
| Power supply for logic circuit | IOVCC | 1.65 | 1.8 | 3.6 | V |
| Current for Driver | IDD | - | 44 | - | mA |
Backlight Driving Conditions
| Parameter | Symbol | Min. | Typ. | Max. | Unit |
|---|---|---|---|---|---|
| LED current | ILED | - | 150 | - | mA |
| LED voltage | VLED+ | 18.2 | 21 | 23.8 | V |
| LED Life Time | 50,000 | - | - | Hr |
Search keyword: tft 5, tft 5", 5 tft lcd, 5" tft lcd, 5 inch tft lcd, tft lcd 5, 5 tft display, 5" tft display, 5 inch tft display, tft display 5, tft display 5"
