Display TFT alto Brilho 5", 720x1280, IPS, MIPI DSI

Model No. WF50DSYA3MNN0

►Tamanho : 5 polegadas
►Resolução : 720x1280 pontos
►Direção de exibição : IPS
►Interface : MIPI DSI
►TFT Drive IC : ILI9881C
►Placa de controle :Não
►Brilho(cd/m2) : 1100
►Quadro com furo passante : Não
►Tela de toque: Sem tela de toque




5" 720x1280 IPS, MIPI DSI, High Brightness TFT LCD - Winstar Display



LCM PIN Definition

Pin Symbol Function
1-9 NC No connection
10-11 VCI Power supply for analog circuits. Connect to an external power supply of 2.5V to 3.6V
12-13 NC No connection
14 RESET The external reset input
Initializes the chip with a low input. Be sure to execute a power-on reset after supplying power.
Fix to VDDI level when not in use.
15 TE  Tearing effect output pin.
Leave the pin open when not in use.
16 NC No connection
17-18 GND Power ground
19-20 IOVCC Power supply for analog circuits. Connect to an external power supply of 1.65V to 3.6V
21 GND Power ground
22 D3P MIPI DSI differential data pair. (Data lane 3)
23 D3N
24 GND Power ground
25 D2P MIPI DSI differential data pair. (Data lane 2)
26 D2N
27 GND Power ground
28 CLKP MIPI DSI differential clock pair
30 GND Power ground
31 D1P MIPI DSI differential data pair. (Data lane 1)
32 D1N
33 GND Power ground
34 D0P MIPI DSI differential data pair. (Data lane 0)
35 D0N
36-37 GND Power ground
38 LED+ Power for LED backlight anode
39 LED- Power for LED backlight cathode
40 NC No connection

General Specifications

Item Dimension Unit
Size 5.0 inch
Dot Matrix 720× 3(RGB) ×1280 dots
Module dimension 68.4 (W) × 122.7 (H) ×4.15 mm
Active area 62.1 (W) × 110.4 (H) mm
Dot pitch 0.08625(W) ×0.08625(H) mm
LCD type TFT, Normally Black, Transmissive
Viewing angle 80/80/80/80
TFT Driver IC ILI9881C or Equivalent
TFT Interface MIPI
Aspect Ratio 16:9
Backlight Type LED, Normally White
Touch Panel Without Touch Panel
Surface Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Electrical Characteristics

Typical Operation Conditions

Item Symbol Values Unit
Min Typ Max
Power supply for analog circuit VCI 2.5 3.3 3.6 V
Power supply for logic circuit IOVCC 1.65 1.8 3.6 V
Current for Driver IDD - 44 - mA

Backlight Driving Conditions

Parameter Symbol Min. Typ. Max. Unit
LED current ILED - 150 - mA
LED voltage VLED+ 18.2 21 23.8 V
LED Life Time   50,000 - - Hr
go top