Home Products TFT Display Standard TFT Color Display WF70B4TIAGDNGB

7-inch TFT Capacitive Touch Display 800x480

Model No. WF70B4TIAGDNGB

►Size : 7 inch
►Resolution : 800 x 480 dots
►View Direction : 12H
►Interface : RGB
►Driver IC : HX8264 & HX8664
►Control-Board : No
►Brightness (cd/m²): 300
►Frame Through Hole: No
►Touch Panel : Projected capacitive touch (PCAP)
►PCAP IC : GT911
►Touch Points: 5

Description

The WF70B4TIAGDNGB is a 7-inch TFT LCD with a capacitive touchscreen. It features a resolution of 800x480 pixels, brightness of 300 nits, a contrast ratio of 800:1, and supports 5-point multi-touch. The LED backlight has a typical lifetime of 50,000 hours.

This module uses the HX8264 and HX8664 driver ICs and supports a 24-bit RGB interface. The capacitive touch panel is controlled by the GT911 IC through an I2C interface. The operating temperature range is -20°C to +70°C, and the storage temperature range is -30°C to +80°C.

Compared with the WF70B4TIAGDNGA model, the WF70B4TIAGDNGB adopts the GT911 touch IC, while the WF70B4TIAGDNGA uses the ILI2130 IC. In addition, the cover glass (CG) of the WF70B4TIAGDNGB is larger than the TFT panel, which provides easier mechanical fixation in applications.

7-inch TFT Capacitive Touch Display 800x480 - WF70B4TIAGDNGB

DRAWING

7-inch TFT Capacitive Touch Display 800x480 - WF70B4TIAGDNGB

SPECIFICATIONS

General Specifications

Item Dimension Unit
Size 7.0 inch
Dot Matrix 800 × RGB × 480 (TFT) dots
Module dimension 202.0 × 135.5 × 8.5 mm
Active area(AA) 154.08 × 85.92 mm
Pixel Pitch 0.1926 × 0.179 mm
LCD type TFT, Normally White, Transmissive
View Direction 12 o'clock
Gray Scale Inversion Direction 6 o'clock
Aspect Ratio 16:9
Backlight Type LED, Normally White
TFT Interface 24-bit RGB
Color arrangement RGB-STRIPE
TFT Driver IC HX8264 & HX8664 or Equivalent
CTP IC GT911
CTP Interface I2C
CTP FW Version 67
CTP Resolution 1024*600
Touch Panel Projected Capacitive Touch Panel (PCAP)
Surface Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Electrical Characteristics

Operating conditions

Item Symbol Min Typ Max Unit
Supply Voltage For Logic VCC 3.0 3.3 3.6 V
Power voltage AVDD 10.2 10.4 10.6 V
Power Supply For Current VCC =3.3V - 4.3 - mA
Power voltage VGH 14.5 15.0 15.5 V
Power voltage VGL -10.5 -10 -9.5 V
Input signal voltage VCOM 3.54 4.04 4.54 V
Supply CTP VDDT 3.1 3.3 3.5 V
ICTP 16 24 mA
 

LED driving conditions

Parameter Symbol Min Typ Max Unit
LED current - - 180 - mA
LED voltage VLED+ 8.4 9.8 11.0 V
LED Life Time - 50,000 - - Hr

Interface

LCM PIN Definition

Pin Symbol Function
1 LED+ Power supply for backlight
2 LED+ Power supply for backlight
3 LED- Backlight ground
4 LED- Backlight ground
5 GND Power ground
6 VCOM Common voltage
7 VCC Power for Digital Circuit
8 MODE DE/SYNC mode select
9 DE Data Input Enable (DEN)
10 VS Vertical Sync Input (VSD)
11 HS Horizontal Sync Input (HSD)
12 B7 Blue data(MSB)
13 B6 Blue data
14 B5 Blue data
15 B4 Blue data
16 B3 Blue data
17 B2 Blue data
18 B1 Blue data
19 B0 Blue data(LSB)
20 G7 Green data(MSB)
21 G6 Green data
22 G5 Green data
23 G4 Green data
24 G3 Green data
25 G2 Green data
26 G1 Green data
27 G0 Green data(LSB)
28 R7 Red data(MSB)
29 R6 Red data
30 R5 Red data
31 R4 Red data
32 R3 Red data
33 R2 Red data
34 R1 Red data
35 R0 Red data(LSB)
36 GND Power Ground
37 DCLK Sample clock (CLKIN)
38 GND Power Ground
39 L/R Left / right selection
40 U/D Up/down selection
41 VGH Gate ON Voltage
42 VGL Gate OFF Voltage
43 AVDD Power for Analog Circuit
44 RESET Global reset pin.
45 NC No connection
46 VCOM Common Voltage
47 DITHB Dithering function
48 GND Power Ground
49 NC No connection
50 NC No connection
 

PCAP PIN Definition

Pin Symbol Function
1 VSS Ground for analog circuit
2 VDDT Power Supply : +3.3V
3 SCL I2C clock input
4 NC No connect
5 SDA I2C data input and output
6 NC No connect
7 /RST External Reset, Low is active
8 NC No connect
9 /INT External interrupt to the host
10 VSS Ground for analog circuit
go top
close

We value your privacy

By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.

We value your privacy

Winstar and certain third parties use cookies on www.winstar.com.tw. The details regarding the types of
cookies, their purpose and the third parties involved are described below and in our Cookie Policy.
Please click on “Allow All” to consent to our usage of cookies in order to have the best possible
experience on our websites. You can also set your preferences or reject cookies (except for strictly
necessary cookies).

Manage Consent Preferences

Always Active
Essential Cookies

These cookies are essential in order to enable you to move around the website and use its
features, such as setting your privacy preferences, logging in or filling in forms.

Analytics Cookies

Also known as “statistics cookies,” these cookies collect information about how you use a website, like which pages you visited and which links you clicked on. See Detail