Model No. WF43VTIAEDNN0
►Size : 4.3”
►480 x 272 Resolution (480x272 TFT LCD)
►View Direction : 12H
►Interface : RGB
►Driver IC：ST7282
►Control-Board : No
►Brightness (cd/m²) : 500
►Frame Through Hole : No
►Touch Screen : Without touch screen
WF43VTIAEDNN0 is a color TFT LCD with a WQVGA resolution of 480x272 dots and a diagonal size of 4.3 inches. This TFT model is built-in with the ST7282 driver IC. WF43VTIAEDNN0 supports a 24-bit RGB interface and is available with optional Resistive Touch Screen (RTP) and Projected Capacitive Touch Screen (PCAP), as well as a high brightness option. WF43VTIAEDNN0 serves as an alternative item to replace WF43HTIAEDNNB, which adopted a CPT (Chunghwa Picture Tubes Ltd) TFT panel.
The supply voltage for logic (VCC) of WF43VTIAEDNN0 ranges from 3.1V to 3.5V, with a typical value of 3.3V. It features a glare surface panel, a view direction of 12 o'clock, grayscale inversion at 6 o'clock, and an aspect ratio of 16:9. The module has a contrast ratio of 500:1(typical value) and a brightness of 500 nits (typical value). It can operate at temperatures ranging from -20°C to +70°C and can be stored at temperatures from -30°C to +80°C.
| Item | Dimension | Unit |
|---|---|---|
| Size | 4.3 | inch |
| Resolution | 480 × RGB × 272 (TFT) | dots |
| Module dimension | 105.5 × 67.2 × 2.95 | mm |
| Active area | 95.04 × 53.856 | mm |
| Dot pitch | 0.066 × 0.198 | mm |
| LCD type | TFT, Normally White, Transmissive | |
| View Direction | 12 o'clock | |
| Gray Scale Inversion Direction | 6 o'clock | |
| Aspect Ratio | 16:9 | |
| TFT Driver IC | ST7282 | |
| Interface | 24-bit RGB | |
| Backlight Type | LED, Normally White | |
| Touch Panel | Without touch panel | |
| Surface | Glare | |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -20 | － | +70 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
| Item | Symbol | Condition | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage For Logic | VDD | - | 3.0 | 3.3 | 3.5 | V |
| Digital operation current | IDD | - | - | 22 | 33 | mA |
| Pin | Symbol | Function |
|---|---|---|
| 1 | VLED- | Power for LED backlight cathode |
| 2 | VLED+ | Power for LED backlight anode |
| 3 | GND | Power ground |
| 4 | VCC | Power voltage |
| 5 | R0 | Red data (LSB) |
| 6~11 | R1~R6 | Red data |
| 12 | R7 | Red data (MSB) |
| 13 | G0 | Green data (LSB) |
| 14~19 | G1~G6 | Green data |
| 20 | G7 | Green data (MSB) |
| 21 | B0 | Blue data (LSB) |
| 22~27 | B1~B6 | Blue data |
| 28 | B7 | Blue data (MSB) |
| 29 | GND | Power ground |
| 30 | CLK | Pixel clock |
| 31 | DISP | Display on/off |
| 32 | HSYNC | Horizontal sync signal; negative polarity |
| 33 | VSYNC | Vertical sync signal; negative polarity |
| 34 | DE | Data Enable |
| 35 | NC | No connection |
| 36 | GND | Power ground |
| 37~40 | NC | No connection |
480x272 tft lcd, 480x272 resolution
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.
