Model No. WF43WTWAEDNN0
►Size : 4.3”
►Resolution : 480×272 dots
►View Direction : IPS
►Interface : RGB
►Driver IC：SC7283
►Control-Board : No
►Brightness (cd/m²): 500
►Frame Through Hole: No
►Touch Screen : Without touch screen
The WF43WTWAEDNN0 is a 4.3-inch IPS TFT display with a resolution of 480x270 pixels. It is built with the SC7283 driver IC and supports an RGB 24-bit interface, offering a typical brightness of 500 nits and a contrast ratio of 800:1. Its aspect ratio is 16:9. We also offer optional Resistive Touch Panels (RTP) and Projected Capacitive Touch Panels (PCAP) for the WF43W model.
These characteristics make the WF43WTWAEDNN0 ideal for applications requiring consistent performance under diverse conditions.
| Item | Dimension | Unit |
|---|---|---|
| Size | 4.3 | inch |
| Dot Matrix | 480 × RGB × 272(TFT) | dots |
| Module dimension | 105.4(W) × 67.1(H) × 2.95 (D) | mm |
| Active area | 95.04 × 53.856 | mm |
| Dot pitch | 0.066 × 0.198 | mm |
| LCD type | TFT, Normally Black, Transmissive | |
| Viewing Angle | 80/80/80/80 | |
| Aspect Ratio | 16:9 | |
| TFT Driver IC | SC7283 or equivalent | |
| Interface | 24-bit RGB | |
| Backlight Type | LED, Normally White | |
| Touch Panel | Without Touch Panel | |
| Surface | Glare | |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -30 | － | +80 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Supply Voltage For LCM | VCC | 3.0 | - | 3.6 | V |
| Supply Current For LCM | ICC | - | 25 | 37.5 | mA |
| Parameter | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| LED current | - | - | 20 | - | mA |
| Power Consumption | - | 540 | 640 | 680 | mW |
| LED voltage | VLED+ | 27 | 32 | 34 | V |
| LED Life Time | - | - | 50,000 | - | Hr |
| Pin | Symbol | Function | ||||||
|---|---|---|---|---|---|---|---|---|
| 1 | LED- | Power for LED backlight cathode | ||||||
| 2 | LED+ | Power for LED backlight anode | ||||||
| 3 | GND | Power ground | ||||||
| 4 | VCC | Power voltage | ||||||
| 5 | R0 | Red data | ||||||
| 6 | R1 | Red data | ||||||
| 7 | R2 | Red data | ||||||
| 8 | R3 | Red data | ||||||
| 9 | R4 | Red data | ||||||
| 10 | R5 | Red data | ||||||
| 11 | R6 | Red data | ||||||
| 12 | R7 | Red data | ||||||
| 13 | G0 | Green data | ||||||
| 14 | G1 | Green data | ||||||
| 15 | G2 | Green data | ||||||
| 16 | G3 | Green data | ||||||
| 17 | G4 | Green data | ||||||
| 18 | G5 | Green data | ||||||
| 19 | G6 | Green data | ||||||
| 20 | G7 | Green data | ||||||
| 21 | B0 | Blue data | ||||||
| 22 | B1 | Blue data | ||||||
| 23 | B2 | Blue data | ||||||
| 24 | B3 | Blue data | ||||||
| 25 | B4 | Blue data | ||||||
| 26 | B5 | Blue data | ||||||
| 27 | B6 | Blue data | ||||||
| 28 | B7 | Blue data | ||||||
| 29 | GND | Power ground | ||||||
| 30 | CLK | Pixel clock input pin(DCLK) | ||||||
| 31 | DISP | DISP sets the display mode.
|
||||||
| 32 | HSYNC | Horizontal sync signal, default is negative polarity. | ||||||
| 33 | VSYNC | Vertical sync signal, default is negative polarity. | ||||||
| 34 | DE | Data input enable. | ||||||
| 35 | NC | No connection | ||||||
| 36 | GND | Power ground | ||||||
| 37 | NC | No connection | ||||||
| 38 | NC | No connection | ||||||
| 39 | NC | No connection | ||||||
| 40 | NC | No connection |
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.
