Home Products TFT Display High Brightness TFT Display WF70A7SZAHLNN0

7-inch High Brightness TFT LCD Display with O-Film Technology (1024x600)

Model No. WF70A7SZAHLNN0

►7 inch Full HD LCD Panel Display
►Size : 7”
►Resolution : 1024x600 dots
►View Direction : 12H
►Interface : LVDS
►Driver IC : EK79001HE + EK73215BCGA
►Control-Board : No
►Brightness(cd/m2): 900
►Frame Through Hole : No
►Touch Screen : Without touch panel
►O-Film : Yes

Description

The WF70A7SZAHLNN0 is a 7-inch high-brightness TFT LCD display module with a resolution of 1024x600. It features O-Film technology, which enhances its viewing angles, with a wide viewing angle range of 75° (Left), 75° (Right), 75° (Up), and 75° (Down). The module is equipped with built-in EK79001HE and EK73215BCGA driver ICs and supports an LVDS interface with a 40-pin FPC pinout.

The power supply voltage (DVDD) for the WF70A7SZAHLNN0 ranges from 3.0V to 3.6V, with a typical value of 3.3V. This TFT LCD module boasts a high brightness of 900 cd/m². It operates within a temperature range of -20℃ to +70℃ and can be stored between -30℃ and +80℃. The WF70A7SZAHLNN0 is ideal for outdoor applications, such as outdoor measuring equipment and GPS navigation systems.

DRAWING

Winstar 7 inch Full HD Display, 7 inch Full HD LCD, HD LCD Panel, 7 inch HD LCD, 7 inch IPS LCD

SPECIFICATIONS

General Specifications

Item Dimension Unit
Size 7.0 inch
Dot Matrix 1024 × RGB × 600(TFT) dots
Module dimension 169.9(W) × 103.4(H) × 5.6(D) mm
Active area 154.2114 × 85.92 mm
Dot pitch 0.1506 × 0.1432 mm
LCD type TFT, Normally White, Transmissive
View Direction 12 o'clock
Gray Scale Inversion Direction 6 o'clock
Aspect Ratio 16:9
Control IC --
Driver IC EK79001HE + EK73215BCGA
Backlight Type LED, Normally White
Touch Screen Without Touch Panel
Interface LVDS
Surface Anti-Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80
 

Electrical Characteristics

1.Typical Operation Conditions

Item Symbol Values Unit
Min. Typ. Max.
Power voltage DVDD 3.0 3.3 3.6 V
AVDD 9.4 9.6 9.8 V
VGH 17 18 19 V
VGL -6.6 -6.0 -5.4 V
Input signal voltage VCOM 3.1 3.3 3.6 V
Input logic high voltage VIH 0.7 DVDD - DVDD V
Input logic low voltage VIL 0 - 0.3 DVDD V

2.Current Consumption

Item Symbol Values Unit
Min. Typ. Max.
Current for Driver IGH - 0.2 1.0 mA
IGL - 0.2 1.0 mA
IDVDD - 4.0 10 mA
IAVDD - 20 50 mA

3.Backlight Driving Conditions

Item Symbol Values Unit
Min. Typ. Max.
Voltage for LED backlight VL 16.8 19.2 21.0 V
Current for LED backlight IL -- 320 -- mA
LED life time - - 50,000 - Hr

Interface

LCM PIN Definition

Pin No. Symbol I/O Function
1 VCOM P Common Voltage
2 VDD P Digital circuit
3 VDD P Digital circuit
4 NC --- No connection
5 Reset I Global reset pin
6 STBYB   I Standby mode, Normally pulled high
STBYB = “1”, normal operation
STBYB = “0”, timing controller, source driver will turn off, all output are High-Z
7 GND P Ground
8 RXIN0- I Negative LVDS differential data input
9 RXIN0+ I Positive LVDS differential data input
10 GND P Ground
11 RXIN1- I Negative LVDS differential data input
12 RXIN1+ I Positive LVDS differential data input
13 GND P Ground
14 RXIN2- I Negative LVDS differential data input
15 RXIN2+ I Positive LVDS differential data input
16 GND P Ground
17 RXCLKIN- I Negative LVDS differential clock input
18 RXCLKIN+ I Positive LVDS differential clock input
19 GND P Ground
20 RXIN3- I Negative LVDS differential data input
21 RXIN3+ I Positive LVDS differential data input
22 GND P Ground
23 NC --- No connection
24 NC --- No connection
25 GND P Ground
26 NC --- No connection
27 DIMO O Backlight CABC controller signal output
28 SELB I 6bit/8bit mode select
H:6bit / L:8bit
29 AVDD P Power for Analog Circuit
30 GND P Ground
31 NC --- No connection
32 NC --- No connection
33 L/R I Horizontal inversion
34 U/D I Vertical inversion
35 VGL P Negative power for TFT
36 GND P Ground
37 GND P Ground
38 VGH P Positive power for TFT
39 NC --- No connection
40 NC --- No connection

I: input ,O: output, P: power

Related Products

go top
close

We value your privacy

By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.

We value your privacy

Winstar and certain third parties use cookies on www.winstar.com.tw. The details regarding the types of
cookies, their purpose and the third parties involved are described below and in our Cookie Policy.
Please click on “Allow All” to consent to our usage of cookies in order to have the best possible
experience on our websites. You can also set your preferences or reject cookies (except for strictly
necessary cookies).

Manage Consent Preferences

Always Active
Essential Cookies

These cookies are essential in order to enable you to move around the website and use its
features, such as setting your privacy preferences, logging in or filling in forms.

Analytics Cookies

Also known as “statistics cookies,” these cookies collect information about how you use a website, like which pages you visited and which links you clicked on. See Detail