Model No. WL0F00035000XGDACSA00
►TFT Size: 3.5"
►TFT Resolution: 320×240 dots
►TFT View Direction: 80/80/80/80
►TFT Touch Screen: Capacitive Touch Panel
►Communication Interface: RS485
►Protocol: Modbus + GPIO
►Brightness(cd/m²): 400
WL0F00035000XGDACSA00 is a 3.5-inch RS485 Smart Display with a projected capacitive touch panel (PCAP). It adopts WINSTAR’s WF35XTWACDNG0 wide-temperature IPS TFT LCD module and integrates a controller board with firmware for GUI development and RS485 communication.
WINSTAR GUI Builder is the main development tool for this Smart Display, allowing users to create UI pages and object settings through a drag-and-drop interface without coding. The module is suitable for single-host architectures using an MCU, Raspberry Pi, industrial controller, or PC-based RS485 communication with a USB-to-RS485 dongle.
GUI Builder User Guide Download WINSTAR GUI Builder
In addition to WINSTAR GUI Builder, this Smart Display is designed with an STM32F series MCU and can be used with STMicroelectronics development tools, including TouchGFX, STM32CubeIDE, STM32CubeMX, and STM32CubeProg.
Demo sets with accessories are available for Smart Display evaluation and GUI development.
For GUI Builder evaluation, demo set information, or development support, please contact us.
| Item | Standard Value | Unit |
|---|---|---|
| Operating voltage | 5 ~ 28 | Vdc |
| Communication Interface | RS485 | N/A |
| MCU | STM32F750 | N/A |
| Flash Memory | 16 | MB |
| SDRAM Memory | 8 | MB |
| LCD display size | 3.5 | inch |
| Dot Matrix | 320 × 3(RGB) × 240 | dot |
| Module dimension | 100(W) × 82(H) × 13.2(D) | mm |
| Active area | 70.08(W) × 52.56(H) | mm |
| Pixel pitch | 0.219 x 0.219 | mm |
| Brightness | Min: 300; Typ: 400 | cd/m2 |
| LCD type | TFT, Normally Black, Transmissive | |
| View Direction | 80/80/80/80(IPS) | |
| Aspect Ratio | 4:3 | |
| Touch Panel | Projected Capacitive Touch Screen (PCAP) | |
| Surface | Glare | |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -30 | － | +80 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Supply Voltage | VIN | 5 | 12 | 28 | V |
| Supply Current | ICC | - | 150 | - | mA |
| I/O pin Voltage | - | - | - | 3.3 | mA |
| Item | Description |
|---|---|
| LCM | WF35XTWACDNG0# |
| PCBA | SV10003R500XA00N0103 |
| Pin | Symbol | Function | Remark |
|---|---|---|---|
| 1 | VIN | Power +5V~28V | Input |
| 2 | GND | Power GND | -- |
| 3-13 | Reserved | -- | -- |
| 14 | RS485_B | RS485 B | I/O |
| 15 | RS485_A | RS485 A | I/O |
| 16 | GND | Power GND | -- |
| Pin | Symbol | Function | Remark |
|---|---|---|---|
| 1 | +3V3 | 3.3V power for JTAG interface | Output |
| 2 | SWCLK | CLK pin for JTAG interface | Input |
| 3 | GND | GND for JTAG interface | -- |
| 4 | SWDIO | Data pin for JTAG interface | I/O |
| 5 | NRST | Reset pin for JTAG interface | Input |
| 6 | GND | Power GND | -- |
| 7 | WKUP | WKup,ADC,Timer,Event,I/O | Input |
| 8 | BOOT0 | Lo: Internal flash boot (Default) Hi: External flash boot |
Input |
| 9 | IO_0 | ADC,DAC,Timer,Event,I/O @3.3V | I/O |
| 10 | IO_1 | ADC,Timer,Event,I/O @3.3V | I/O |
| 11 | IO_2 | ADC,Timer,Event,I/O @3.3V | I/O |
| 12 | IO_3 | RST,Timer,Event,I/O @3.3V | I/O |
| 13 | IO_4 | RST,Timer,Event,I/O @3.3V | I/O |
| 14 | IO_5 | ADC,Timer,Event,I/O @3.3V | I/O |
| 15 | IO_6 | RST,Timer,Event,I/O @3.3V | I/O |
| 16 | IO_7 | RST,ADC,Event,I/O @3.3V | I/O |
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.