8 inch TFT with LCD SSD1963 Controller Board
Model No. WF80QTIFGDBNB
►Size : 8 inch
►Resolution : 800 x 480 dots
►View Direction : 12H
►Interface : MCU
►Controller IC:SSD1963
►Control-Board : Yes
►Brightness(cd/m²): 420
►Frame Through Hole : No
►Touch Screen : No
Description
This 8-inch TFT LCD display module of WF80QTIFGDBNB is with outline dimension of 192.8.0 x 116.9 mm and active area size of 176.64 x 99.36 mm. It has a resolution of 800x480 pixels, an aspect ratio of 16:9, a brightness of 420 nits (typical value), and a contrast ratio of 500:1.
This module features a control board and a built-in SSD1963 controller IC with MCU interface support. Its 33~36 pins are uniformly defined as the backlight power input, so customers do not need to design additional backlight circuits. It's supply voltage range from for LCM is 3.0V to 3.3V (typical 3.1V). Operating temperature ranges from -20℃ to +70℃, and the storage temperature are from -30℃ to +80℃.
The Winstar TFT Q Series Modules provide the following innovative advantages to offer outstanding performance for colorful displays:
- The Q Series integrates a 36-pin connector on the SSD1963 controller board, and all connectors are oriented in the same direction.
- The Q Series modules are available in 8080 family MPU 8-bit and 16-bit parallel interface options.
- Pins 33 to 36 are already pre-defined as the backlight supply.
- With a built-in backlight driver IC, Q series TFT displays can be driven by 5V (the 3.5" and 4.3" also support 3.3V). Customers do not have to change the backlight driver circuits when changing the TFT module sizes.
- The 5.7”, 7.0”, 8.0”, and 10.2” Q Series allow for the design of a “Sleep Mode” to close BIAS (VGH, VGL, AVDD) for low power consumption.
- Resistive touch screen options are available for all Q Series displays, and a 4-line signal (X1, Y1, X2, Y2) can be input from the 36-pin connector.
- Capacitive touch screen options are available for all Q Series displays, and the I2C read/write protocol can be input from the 36-pin connector.
DRAWING
![8.0" TFT LCD Display with Controller Board - WF80QTIFGDBNB](/uploads/editor/images/tft-lcd/tft-lcd-controller-board/WF80QTIFGDBNB.jpg)
SPECIFICATIONS
Interface
Pin | Symbol | Function |
---|---|---|
1 | GND | System ground pin of the IC . Connect to system ground. |
2 | VDD | Power Supply : +3.3V |
3 | BLE | Backlight control signal , H: On \ L: Off |
4 | D/C | Data/Command select |
5 | WR | Write strobe signal |
6 | RD | Read strobe signal |
7~14 | DB0~DB7 | Data bus |
15~22 | DB8~DB15 | Data bus (When select 8bits Mode, this pin is NC) |
23~24 | NC | No connect |
25 | CS | Chip select |
26 | RESET | Hardware reset |
27 | L/R | Left / right selection; Default L/R=H |
28 | U/D | Up/down selection; ; Default U/D=L |
29~32 | NC | No connect |
33~34 | VLED- | Power for LED Driver IC(GND) |
35~36 | VLED+ | Power for LED Driver IC(+5V) |
General Specifications
Item | Dimension | Unit |
---|---|---|
Size | 8.0 | inch |
Dot Matrix | 800 × RGB × 480 (TFT) | dots |
Module dimension | 192.8(W) × 116.9(H) × 12.1(D) | mm |
Active area | 176.64 × 99.36 | mm |
Dot pitch | 0.2208 × 0.2070 | mm |
LCD type | TFT, Normally White, Transmissive | |
View Direction | 12 o'clock | |
Gray Scale Inversion Direction | 6 o'clock | |
Aspect Ratio | 16:9 | |
Backlight Type | LED, Normally White | |
Controller IC | SSD1963 | |
Interface | Digital 8080 family MPU 8bit/16bit | |
Touch Panel | Without touch panel | |
Surface | Anti-Glare |
Absolute Maximum Ratings
Item | Symbol | Min | Typ | Max | Unit |
---|---|---|---|---|---|
Operating Temperature | TOP | -20 | - | +70 | ℃ |
Storage Temperature | TST | -30 | - | +80 | ℃ |
Electrical Characteristics
Item | Symbol | Condition | Min | Typ | Max | Unit |
---|---|---|---|---|---|---|
Supply Voltage For LCM | VDD | — | 3.0 | 3.1 | 3.3 | V |
Supply Current For LCM | IDD | — | — | 120 | 180 | mA |
Search keyword: tft 8, tft 8", 8 tft lcd, 8" tft lcd, 8 inch tft lcd, tft lcd 8, 8 tft display, 8" tft display, 8 inch tft display, tft display 8, tft display 8", 8.0 tft lcd